Hi Huan Zhou
Thanks!
On Wed, 2025-01-08 at 16:49 +0800, Huan Zhou wrote:
>
> ---
> This patch introduce improvement for get dram size on bananapi BPI-F3,
> retrieving the dram size dynamically.
> Have tested on bananapi BPIF3 4G and jupiter 8G.
>
> Signed-off-by: Huan Zho
Hi Huan
On Thu, 2024-12-12 at 12:00 +0800, Huan Zhou wrote:
> On Wed, Dec 11, 2024 at 09:35:12AM +0100, Marcel Ziswiler wrote:
[snap]
> > > > I tried and it seems to work fine, resp. the only difference I could
> > > > spot is that instead of 'crc32+
> >
Hi Huan
On Sun, 2024-12-08 at 14:51 +0800, Huan Zhou wrote:
> On Wed, Dec 04, 2024 at 09:52:09AM +0100, Marcel Ziswiler wrote:
> > Hi Yixun Lan
> >
> > On Wed, 2024-12-04 at 08:58 +0800, Yixun Lan wrote:
> > > Hi Marcel, Huan
> > >
> > >
Hi Yixun Lan
On Wed, 2024-12-04 at 08:58 +0800, Yixun Lan wrote:
> Hi Marcel, Huan
>
> On 18:52 Tue 03 Dec , Marcel Ziswiler wrote:
> > Hi Huan Zhou
> >
> > On Fri, 2024-11-29 at 13:37 +0800, Huan Zhou wrote:
> > > From: Kongyang Liu
> > >
&g
Hi Huan Zhou
On Fri, 2024-11-29 at 13:37 +0800, Huan Zhou wrote:
> From: Kongyang Liu
>
> Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
>
> Signed-off-by: Kongyang Liu
> Signed-off-by: Huan Zhou
> ---
> doc/board/index.rst | 1 +
> doc/board/spacemit/
0714150828.736-1-seashell11234...@gmail.com/
>
> Signed-off-by: Huan Zhou
> Signed-off-by: Kongyang Liu
Whole series
Tested-by: Marcel Ziswiler
> ---
> Kongyang Liu (2):
> riscv: spacemit: bananapi_f3: initial support added
> doc: spacemit: bananapi_f3: docume
On Thu, 2024-07-18 at 12:33 +0800, Kongyang Liu wrote:
> Add basic support for SpacemiT's Banana Pi F3 board
>
> Signed-off-by: Kongyang Liu
>
> ---
>
> Changes in v2:
> - Change license to GPL-2.0-or-later
> - Add memory node for dts
> - Add ft_board_setup function for kernel memory init
> - U
On Thu, 2024-07-18 at 12:33 +0800, Kongyang Liu wrote:
> Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
>
> Signed-off-by: Kongyang Liu
> ---
>
> (no changes since v1)
>
> doc/board/index.rst | 1 +
> doc/board/spacemit/bananapi_f3.rst | 78 ++
On Thu, 2024-07-18 at 12:33 +0800, Kongyang Liu wrote:
> Banana Pi F3 board is a industrial grade RISC-V development board, it
> design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI
> computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB
missing space before 2
On Wed, 2024-05-22 at 10:28 +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini
>
> Marcel is leaving Toradex and the email will start bouncing in a few
> weeks, move maintainership to myself.
>
> Cc: Marcel Ziswiler
> Signed-off-by: Francesco Dolcini
Acke
rt for signing TIFSSTUB Images") did for TI AM62
> SK board.
>
> Signed-off-by: Parth Pancholi
> Signed-off-by: Francesco Dolcini
Acked-by: Marcel Ziswiler
Just one minor note in-lined further below.
> ---
> .../dts/k3-am625-verdin-wifi-dev-binman.dtsi | 140 ++
From: Marcel Ziswiler
Move verdin-imx8mm and verdin-imx8mp to OF_UPSTREAM:
- handle the fact that dtbs now have a 'freescale/' prefix
- imply OF_UPSTREAM
- remove redundant files from arch/arm/dts leaving only the
*-u-boot.dtsi files
- update MAINTAINERS files
Signed-off-by: Marce
From: Marcel Ziswiler
Move verdin-am62 to OF_UPSTREAM:
- handle the fact that dtbs now have a 'ti/' prefix
- imply OF_UPSTREAM
- remove redundant files from arch/arm/dts leaving only the
*-u-boot.dtsi files
- update MAINTAINERS file
Signed-off-by: Marcel Ziswiler
---
arch/arm/dt
> This inversion causes board_mem_get_layout() to report incorrect RAM size.
>
> Go back the original error check logic to fix the problem.
>
> Fixes: aa6e698a7acd ("imx: toradex/colibri-imx8x: correct SCU API usage")
> Reported-by: Hiago De Franco
> Signed-off-by: Fabio E
read.
>
> This inversion causes board_mem_get_layout() to report incorrect RAM size.
>
> Go back the original error check logic to fix the problem.
>
> Fixes: bfb3409d676f ("imx: toradex/apalis-imx8: correct SCU API usage")
> Signed-off-by: Fabio Estevam
Acked-by: M
Hi Apurva
On Wed, 2024-02-28 at 16:59 +0530, Apurva Nandan wrote:
> Hi Marcel,
>
> On 27/02/24 21:45, Marcel Ziswiler wrote:
> > Hi Apurva
> >
> > On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> > > Hello Everyone!
> > >
> > >
Hi Sumit
On Wed, 2024-02-28 at 11:04 +0530, Sumit Garg wrote:
> Hi Marcel,
>
> On Tue, 27 Feb 2024 at 21:45, Marcel Ziswiler
> wrote:
> >
> > Hi Apurva
> >
> > On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> > > Hello Everyone!
> >
Hi Apurva
On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> Add defconfigs for building R5 U-Boot SPL and A72 U-Boot.
>
> Signed-off-by: Hari Nagalla
> Signed-off-by: Apurva Nandan
> ---
> board/ti/j784s4/MAINTAINERS | 2 +
> configs/j784s4_evm_a72_defconfig | 159 ++
Hi Apurva
On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> Introduce the base dts files needed for u-boot or to augment the linux
> dtbs for use in the u-boot-spl and u-boot binaries.
>
> Signed-off-by: Hari Nagalla
> [ add binman and ddr dtsi files ]
> Signed-off-by: Neha Malcom Franci
Hi Apurva
On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> From: Dasnavis Sabiya
>
> Introduce the base dts files needed for u-boot or to augment the linux
> dtbs for use in the u-boot-spl and u-boot binaries.
>
> Signed-off-by: Dasnavis Sabiya
> Signed-off-by: Apurva Nandan
> ---
>
Hi Apurva
On Sat, 2024-02-24 at 01:51 +0530, Apurva Nandan wrote:
> Hello Everyone!
>
> This series will introduce basic support (SD and UART) support for Texas
> Instruments J784S4 EVM.
>
> The J784S4 SoC device tree patches are taken from kernel patch submissions
> and will be updated as they
On Wed, 2024-02-21 at 15:31 +0100, Francesco Dolcini wrote:
> On Wed, Feb 21, 2024 at 09:18:51AM +0000, Marcel Ziswiler wrote:
> > On Wed, 2024-02-21 at 08:55 +0100, Francesco Dolcini wrote:
> > > On Tue, Feb 20, 2024 at 06:40:56PM +0530, Sumit Garg wrote:
> > > > A
Hi Tom
On Wed, 2024-02-21 at 08:10 -0500, Tom Rini wrote:
> On Tue, Feb 20, 2024 at 07:51:35PM +0000, Marcel Ziswiler wrote:
> > On Tue, 2024-02-20 at 21:14 +0200, Svyatoslav Ryhel wrote:
> > > вт, 20 лют. 2024 р. о 20:29 Francesco Dolcini пише:
> > > >
Hi Sumit
On Wed, 2024-02-21 at 08:55 +0100, Francesco Dolcini wrote:
> Hello Sumit,
>
> On Tue, Feb 20, 2024 at 06:40:56PM +0530, Sumit Garg wrote:
> > Also, enable reset driver which is a prerequisite for PCIe support.
> >
> > Signed-off-by: Sumit Garg
> > ---
> > configs/verdin-imx8mp_defcon
On Tue, 2024-02-20 at 21:14 +0200, Svyatoslav Ryhel wrote:
> вт, 20 лют. 2024 р. о 20:29 Francesco Dolcini пише:
> >
> > From: Emanuele Ghidoli
> >
> > This commit introduces support for the Toradex sysinfo driver in U-Boot,
> > which uses information from Toradex config block to print correct
>
> Reported-by: Sahaj Sarup
> Closes:
> https://lore.kernel.org/all/CAKZ1LvM45MB8N0CqgU+C7i9=bjb6kqntxwo2tv407hklwtc...@mail.gmail.com/
> Reported-by: Marcel Ziswiler
> Closes:
> https://lore.kernel.org/all/e40ed93bd8f371ec56b8fc451dcb458f3ce6dcba.ca...@toradex.com/
Gentle ping on this. Any opinion on that matter much appreciated. Thanks!
On Wed, 2024-01-24 at 18:16 +0100, Marcel Ziswiler wrote:
> Hi Simon
>
> Sorry, I missed this one, also due to a longer Xmas/New Year and later skiing
> vacation.
>
> On Sun, 2023-11-12 at 19:58 -0700,
Hi Simon
Sorry, I missed this one, also due to a longer Xmas/New Year and later skiing
vacation.
On Sun, 2023-11-12 at 19:58 -0700, Simon Glass wrote:
> Boards can use a sysinfo driver if a particular model name is needed.
Okay, but so far we did print more than just a model name:
On Apalis/Co
On Mon, 2024-01-22 at 17:09 -0300, Joao Paulo Goncalves wrote:
> From: Joao Paulo Goncalves
>
> Add new apalis imx6 and colibri imx6/imx7 products IDs.
>
> Signed-off-by: Joao Paulo Goncalves
Acked-by: Marcel Ziswiler
> ---
> board/toradex/common/tdx-cfg-block.c |
Hi Guys
On Sat, 2024-01-13 at 21:45 +0100, Francesco Dolcini wrote:
> On Sat, Jan 13, 2024 at 06:40:19PM +0000, Marcel Ziswiler wrote:
> > Hi Marek
> >
> > Thanks, seems like a decent idea. I guess we just did not do it as those
> > previous revisions were just
&g
uot;
> Cc: Fabio Estevam
> Cc: Francesco Dolcini
> Cc: Marcel Ziswiler
> Cc: Philippe Schenker
> Cc: Stefano Babic
Acked-by: Marcel Ziswiler
> ---
> board/toradex/verdin-imx8mm/verdin-imx8mm.c | 19 +++
> 1 file changed, 19 insertions(+)
>
>
R SubSystem v9.10).
>
> [1] https://dev.ti.com/sysconfig
>
> Fixes: 7d1a10659f5b ("board: toradex: add verdin am62 support")
> Signed-off-by: Emanuele Ghidoli
> Signed-off-by: Francesco Dolcini
Acked-by: Marcel Ziswiler
> ---
> .../dts/k3-am625-verdin-lpddr
On Fri, 2023-12-15 at 08:23 -0600, Nishanth Menon wrote:
[snip]
> > > What version of TIFS are you running? Not getting a response usually
> > > means firmware is dead or we're not using the right thread to talk.
> >
> > Yeah, sorry. I was always running the latest from the ti-linux-firmware
>
On Thu, 2023-12-14 at 14:28 -0600, Andrew Davis wrote:
> On 12/14/23 2:10 PM, b...@ti.com wrote:
> > On December 14, 2023 thus sayeth Marcel Ziswiler:
> > > Hi Apurva
> > >
> > > Thanks!
> > >
> > > On Wed, 2023-12-06 at 18
On Thu, 2023-12-14 at 14:10 -0600, b...@ti.com wrote:
> On December 14, 2023 thus sayeth Marcel Ziswiler:
> > Hi Apurva
> >
> > Thanks!
> >
> > On Wed, 2023-12-06 at 18:07 +0530, Apurva Nandan wrote:
> > > Hello Everyone!
> > >
> >
Hi Apurva
Thanks!
On Wed, 2023-12-06 at 18:07 +0530, Apurva Nandan wrote:
> Hello Everyone!
>
> This series will introduce basic support (SD and UART) support for Texas
> Instruments J784S4 EVM.
For the whole series:
Tested-by: Marcel Ziswiler
However, one thing I noticed
fconfig, this adds CONFIG_OF_LIBFDT_OVERLAY
> explicitly.
>
> Signed-off-by: Francesco Dolcini
Acked-by: Marcel Ziswiler
> ---
> configs/verdin-am62_a53_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/configs/verdin-am62_a53_defconfig
> b/configs/v
Hi Apurva
Thanks for the update, however, it does not seem to compile. See below...
On Thu, 2023-11-30 at 17:25 +0530, Apurva Nandan wrote:
> Add board files for J784S4 EVM.
>
> Signed-off-by: Hari Nagalla
> [ add env and board specific yaml files for binman ]
> Signed-off-by: Neha Malcom Fran
On Fri, 2023-11-17 at 14:42 -0500, Tom Rini wrote:
> On Thu, Oct 26, 2023 at 09:32:20AM +0200, Marcel Ziswiler wrote:
>
> > From: Marcel Ziswiler
> >
> > This fixes a regression in the eMMC fast boot mode case where the buffer
> > was missing 464 bytes.
> >
Hi Simon
On Thu, 2023-11-16 at 09:03 -0700, Simon Glass wrote:
> Hi Neha,
>
> On Wed, 15 Nov 2023 at 03:10, Neha Malcom Francis wrote:
> >
> > Add templates for FIT images used extensively across K3 boards with most
> > of the code common. This includes the FIT portions of:
> > - tispl.
Hi Tom
On Thu, 2023-11-02 at 08:09 +0100, Marcel Ziswiler wrote:
> Hi Stefano
>
> On Thu, 2023-10-26 at 10:36 +0200, Stefano Babic wrote:
> > On 26.10.23 10:29, Rasmus Villemoes wrote:
> > > On 26/10/2023 09.32, Marcel Ziswiler wrote:
> > > > From: Marcel Zis
For the whole series:
Tested-by: Marcel Ziswiler
> Neha Malcom Francis (2):
> arm: dts: k3-binman: Add support for FIT templates
> arm: dts: k3-*-binman: Move to using templated FITs
>
> arch/arm/dts/k3-am625-sk-binman.dtsi | 157 +
> .../dts/k3-am625-verd
Hi Nishanth
On Tue, 2023-11-14 at 21:28 -0600, Nishanth Menon wrote:
> Hi,
> rev 2 of the series to sync am62 with v6.7-rc1.
For the whole series:
Tested-by: Marcel Ziswiler
> Changes:
> - picked up reviews, tested tags.
> - minor commit message correction in patch #4.
>
&g
gested-by: Nishanth Menon
> Fixes: 9a3f2b6798b0 ("arm: dts: k3-am625-verdin-wifi-dev-u-boot.dtsi: Fix
> DMA/Ethernet")
> Signed-off-by: Roger Quadros
Tested-by: Marcel Ziswiler
> ---
> arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi | 1 +
> 1 file changed, 1 inser
Hi guys
On Fri, 2023-08-04 at 19:04 +0800, Macpaul Lin wrote:
> From: Fabien Parent
>
> The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and
> a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts,
> SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and sever
Hi there
We recently got our first batch of i.MX 8M Plus QuadLite based SoMs. While NXP
downstream works just fine on
them they just hang booting with latest upstream U-Boot (and TF-A). Replacing
TF-A with the downstream NXP one
made upstream U-Boot work as well. Further debugging TF-A showed
i
Hi Stefano
On Thu, 2023-10-26 at 10:36 +0200, Stefano Babic wrote:
> On 26.10.23 10:29, Rasmus Villemoes wrote:
> > On 26/10/2023 09.32, Marcel Ziswiler wrote:
> > > From: Marcel Ziswiler
> > >
> > > This fixes a regression in the eMMC fast boot mode case wh
Hi Nishanth
On Fri, 2023-10-27 at 15:46 -0500, Nishanth Menon wrote:
> On 16:46-20231027, Roger Quadros wrote:
> > Hi,
> >
> > Since commit [1], Ethernet is broken on TI AM62 and AM64 platforms.
> >
> > The commit [1] is not the culprit. It just unearths the problem by fixing
> > the error check
> Signed-off-by: Roger Quadros
With just one minor nitpick blow.
Tested-by: Marcel Ziswiler
> ---
> .../dts/k3-am625-verdin-wifi-dev-u-boot.dtsi | 27 +++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/dts/k3-am625-verdin-wifi-dev-u-boot.dtsi
>
On Fri, 2023-10-27 at 16:46 +0300, Roger Quadros wrote:
> From: Siddharth Vadapalli
>
> Update main_bcdma and main_pktdma nodes for native configuration in the
> absence of DM services.
>
> Reported-by: Nishanth Menon
> Signed-off-by: Siddharth Vadapalli
> Signed-off-by: Roger Quadros
> ---
>
Hi Fabien and Macpaul
Thanks for your patch set.
On Fri, 2023-08-04 at 19:04 +0800, Macpaul Lin wrote:
> From: Fabien Parent
>
> Add mt8195-demo board support.
> This demo purpose board uses MediaTek's MT8195 SoC.
>
> Signed-off-by: Fabien Parent
> Signed-off-by: Amjad Ouled-Ameur
> Signed-o
Hi Rasmus
On Wed, 2023-10-25 at 20:35 +0200, Rasmus Villemoes wrote:
> On 25/10/2023 18.01, Marcel Ziswiler wrote:
> > Hi Rasmus
> >
> > On Tue, 2023-10-24 at 16:32 +0200, Rasmus Villemoes wrote:
>
> > > What am I missing?
> >
> > Good question. Som
From: Marcel Ziswiler
This fixes a regression in the eMMC fast boot mode case where the buffer
was missing 464 bytes.
The code figures out how many bytes must at least be fetched to honor
the current read, rounds that up to the ss->pagesize [which is a no-op
in the USB download case beca
From: Marcel Ziswiler
The first patch is a trivial spelling fix in comments. The second fixes
a recent regression that only manifests in the eMMC fast boot mode case
which does actually also use streaming rather than seekable.
Thanks go to Rasmus who helped me debug this and suggested the fix
From: Marcel Ziswiler
Fix comment about Stream(USB) download failure.
Fixes: 1cbebc786276 ("imx: add rom api support")
Signed-off-by: Marcel Ziswiler
---
arch/arm/mach-imx/spl_imx_romapi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/ar
Hi Rasmus
On Tue, 2023-10-24 at 16:32 +0200, Rasmus Villemoes wrote:
> On 24/10/2023 15.15, Marcel Ziswiler wrote:
>
> Hi Marcel
>
> tl;dr: can you try
>
> @@ -330,7 +335,7 @@ static int spl_romapi_load_image_stream(struct
> spl_image_info *spl_image,
>
>
Hi Fabio
Thanks!
On Wed, 2023-10-25 at 09:20 -0300, Fabio Estevam wrote:
> Hi Marcel,
>
> On Tue, Oct 24, 2023 at 10:16 AM Marcel Ziswiler
> wrote:
>
> > Yes, regular eMMC boot. Serial download also works for me (note this
> > requires a patch still not merged
&g
Hi Rasmus
Thanks again.
On Tue, 2023-10-24 at 13:17 +0200, Rasmus Villemoes wrote:
[snip]
>
> >
> So this is interesting. I tried disabling CONFIG_IMX_HAB (because that
> case doesn't create an .itb with external data) and boot on a board
> which is not locked down, and I get
>
> Trying to b
Hi Rasmus
Thanks for your help.
On Tue, 2023-10-24 at 11:18 +0200, Rasmus Villemoes wrote:
[snip]
> Hm. Can you show the result of 'fdtdump u-boot.itb | head'
⬢[zim@toolbox u-boot.git]$ fdtdump u-boot.itb | head
fdtdump is a low-level debugging tool, not meant for general use.
If y
Hi
On our weekly master upstream CI build we noticed Verdin iMX8M Plus boot
looping.
Bisecting pointed to the following commit:
commit 4b4472438f5a ("imx: spl_imx_romapi: avoid tricky use of
spl_load_simple_fit() to get full FIT size")
It looks like this introduced a regression.
Before and a
Hi Stefano
Maybe you missed that one (i.MX 8M Plus vs. Mini)? Thanks!
Cheers
Marcel
On Mon, 2023-08-28 at 19:24 -0300, Fabio Estevam wrote:
> Hi Marcel,
>
> On Mon, Aug 28, 2023 at 6:38 PM Marcel Ziswiler wrote:
> >
> > From: Marcel Ziswiler
> >
> > Enabl
From: Marcel Ziswiler
A53 U-Boot proper got broken because nodes marked as 'bootph-pre-ram'
are no longer available in U-Boot proper before relocation.
Fix this by marking all nodes in u-boot.dtsi as 'bootph-all'.
Fixes: 9e644284ab812 ("dm: core: Report bootph-pre-r
On Wed, 2023-10-04 at 16:13 -0300, Francesco Dolcini wrote:
> From: Joao Paulo Goncalves
>
> The bootcmd_mfg env variable is legacy from IMX downstream u-boot branch
> and is not needed on mainline.
>
> Signed-off-by: Joao Paulo Goncalves
> Signed-off-by: Francesco Dolci
re U-Boot is loaded directly to RAM. This
> allows variant detection for an accurate device tree selection.
>
> Signed-off-by: Hiago De Franco
Acked-by: Marcel Ziswiler
> ---
> board/toradex/colibri_imx7/colibri_imx7.c | 24 +++
> 1 file changed, 24 insertions
with de-rating
> 3b111: SDRAM High temperature operating limit exceeded
>
> [1]: https://www.nxp.com/docs/en/errata/IMX8MM_0N87W.pdf
>
> Signed-off-by: Andrejs Cainikovs
Acked-by: Marcel Ziswiler
> ---
> board/toradex/verdin-imx8mm/lpddr4_timing.c | 51 ++-
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> TI K3 J784S4 and AM69 SK are new additions to the K3 SoC family.
> Add documentation about the J784S4 EVM and AM69 SK.
>
> Signed-off-by: Dasnavis Sabiya
> Signed-off-by: Apurva Nandan
> ---
> board/ti/j784s4/MAINTAINERS | 1 +
> doc/b
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> From: Dasnavis Sabiya
>
> Introduce the base dts files needed for u-boot or to augment the linux
> dtbs for use in the u-boot-spl and u-boot binaries.
>
> Signed-off-by: Dasnavis Sabiya
> Signed-off-by: Apurva Nandan
> ---
> arch/arm/d
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> From: Dasnavis Sabiya
>
> Introduce the basic am69-sk evm dts from the next-20230905 tag of the
> linux kernel.
>
> Signed-off-by: Dasnavis Sabiya
> Signed-off-by: Apurva Nandan
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> Add support for DMA in J784S4 SoC.
>
> Signed-off-by: Jayesh Choudhary
> Signed-off-by: Hari Nagalla
> Signed-off-by: Apurva Nandan
> ---
> drivers/dma/ti/Makefile | 1 +
> drivers/dma/ti/k3-psil-j784s4.c | 166 +++
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> Add clk and device data which can be used by respective drivers
> to configure clocks and PSC.
>
> Signed-off-by: Hari Nagalla
> Signed-off-by: Apurva Nandan
> ---
> arch/arm/mach-k3/j784s4/Makefile | 5 +
> arch/arm/mach-k3/j784
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> Add support for J784S4 SoC Identification.
>
> Signed-off-by: Hari Nagalla
> Signed-off-by: Apurva Nandan
> ---
> arch/arm/mach-k3/include/mach/hardware.h | 1 +
> drivers/soc/soc_ti_k3.c | 3 +++
> 2 files changed, 4 in
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> Add j784s4 initialization files for initial SPL boot.
>
> Signed-off-by: Hari Nagalla
> [ add firewall configurations and change the R5 MCU scratchpad ]
> Signed-off-by: Manorit Chawdhry
> Signed-off-by: Dasnavis Sabiya
> Signed-off-by:
On Fri, 2023-09-08 at 16:35 +0530, Apurva Nandan wrote:
> Hello Everyone!
>
> This series will introduce basic support (SD and UART) support for Texas
> Instruments J784S4 EVM.
>
> The J784S4 SoC device tree patches are taken from kernel patch submissions
> and will be updated as they are accepte
Hi Hiago
Thanks!
On Mon, 2023-09-04 at 10:24 -0300, Hiago De Franco wrote:
> From: Hiago De Franco
>
> Drop unused code related to CONFIG_TDX_EASY_INSTALLER, that existed only on
> toradex downstream branch.
>
> Signed-off-by: Hiago De Franco
Acked-by: Marcel Ziswiler
; Signed-off-by: Simon Glass
Reviewed-by: Marcel Ziswiler
[snip]
Cheers
Marcel
On Thu, 2023-08-24 at 16:42 +0200, Francesco Dolcini wrote:
> Hello Nishanth,
>
> On Thu, Aug 24, 2023 at 07:10:57AM -0500, Nishanth Menon wrote:
> > On 13:19-20230824, Francesco Dolcini wrote:
> > > On Thu, Aug 24, 2023 at 10:08:49AM +0200, Emanuele Ghidoli wrote:
> > > > From: Emanuele Ghidoli
From: Marcel Ziswiler
Now with the update U-Boot wrappers having been sorted out, document
their usage.
Signed-off-by: Marcel Ziswiler
---
doc/board/toradex/verdin-am62.rst | 14 ++
1 file changed, 14 insertions(+)
diff --git a/doc/board/toradex/verdin-am62.rst
b/doc/board
From: Marcel Ziswiler
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to
GPL-2.0-or-later.
- Add links to product websites of SoM and carrier board where missing.
- Add information about update U-Boot wrapper where missing.
- Add sectionauthor where missing.
- Update information about
From: Marcel Ziswiler
This series contains some minor documentation updates. The second commit
documents what got discussed here [1] and therefore depends on
Emanuele's series landing first.
[1] https://lore.kernel.org/all/zodsx2vmnf20i...@francesco-nb.int.toradex.com
Marcel Ziswil
On Thu, 2023-08-24 at 18:15 +0200, Francesco Dolcini wrote:
[snip]
> > > > > What about include/configs/verdin-am62.h ?
> > > > >
> > > > > It seems that that board, which is am62x based, also has the un-needed
> > > > > include.
> > > > >
> > > > > Since i'm not 100% sure, I have added Marcel
From: Marcel Ziswiler
Drop unused macro. This was copied straight from the AM62x EVM but while
meant for a second region of DDR this is not even needed for the AM62x
EVM configurations and has meanwhile also been dropped there.
Note that on the Verdin AM62, we do auto-detect the amount of SDRAM
From: Marcel Ziswiler
Enable USB device and fastboot support which may be used to load the
Toradex Easy Installer FIT image.
While at it also enable USB mass storage aka UMS support.
Note that the i.MX 8M Plus recovery mode support is based on the USB
boot stage of the BOOTROM and does NOT
Reviewed-by: Fabio Estevam
For the entire series.
Reviewed-by: Marcel Ziswiler
> ---
> v2: added Fabio's rb tag
> ---
> arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi | 7 ---
> arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 7 ---
> arch/arm/dts
bled.
>
> Signed-off-by: Tim Harvey
Reviewed-by: Marcel Ziswiler
> ---
> v2:
> - fix invalid ifdef
> - add rb tags from Fabio and Peng
> ---
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 16 ---
> .../dts/imx8mm-kontron-bl-common-u-boot.dtsi |
Sali Alexander
On August 25, 2023 6:24:01 PM GMT+02:00, "Sverdlin, Alexander"
wrote:
>Hello Marcel,
>
>On Fri, 2023-08-25 at 15:20 +0200, Alexander Sverdlin wrote:
>> > +Build U-Boot for R5
>> > +---
>> > +
>> > +.. code-block:: bash
>> > +
>> > + $ export ARCH=arm
>> > + $
rek Vasut
Tested-by: Marcel Ziswiler
> ---
> v7:
> - add #ifdef protection around clk_disable error path
>
> v6:
> - move changes to clk to separate patch
> - sort new vars in reverse christmas tree style
>
> v5:
> - remove #if CONFIG_IS_ENABLED around struct
On Thu, 2023-08-24 at 07:05 -0500, Nishanth Menon wrote:
> On 10:13-20230824, Mattijs Korpershoek wrote:
> > Hi Nishanth,
> >
> > On mer., août 23, 2023 at 22:10, Nishanth Menon wrote:
> >
> > > Drop unused macro. This was meant for a second region of DDR which we
> > > do not need for AM62x evm
From: Marcel Ziswiler
Enable USB SDP SPL aka serial downloader recovery mode support.
While at it also enable fastboot support which may be used to
subsequently load further stages like a Toradex Easy Installer FIT
image.
Signed-off-by: Marcel Ziswiler
---
.../dts/imx8mm-verdin-wifi-dev-u
Hi Sjoerd
On Thu, 2023-06-01 at 08:37 +0200, Sjoerd Simons wrote:
> On Wed, 2023-05-31 at 17:14 -0400, Tom Rini wrote:
> > On Thu, Apr 06, 2023 at 08:55:34PM +0200, Sjoerd Simons wrote:
> >
> > > This series adds more boot sources for the TI am62x. For that the
> > > dts'
> > > are synced from th
From: Marcel Ziswiler
Fix the Verdin module output which was missing white space for correct
rendering.
While at it also leave product links, add section author also for the
Verdin iMX8M Mini and Plus, and add a missing CROSS_COMPILE export for
the Verdin iMX8M Mini.
Signed-off-by: Marcel
Sorry about that. Looks like patman somehow choose you. I will add a rule to no
longer do that. Thanks!
On August 6, 2023 12:58:29 PM GMT+02:00, "Pali Rohár" wrote:
>I'm not responsible for k3, so do not send me these emails.
>
>On Friday 28 July 2023 22:54:53 Marcel
On August 4, 2023 8:43:13 PM GMT+02:00, Nishanth Menon wrote:
>On 14:35-20230804, Tom Rini wrote:
>[..]
>> > > +Output:
>> > > +
>> > > +.. code-block:: bash
>> [snip]
>> > I think you missed adding white space here.
>> >
>> > It renders as this:
>> > https://usercontent.irccloud-cdn.com/file
Hi Nishanth
On Fri, 2023-08-04 at 05:50 -0500, Nishanth Menon wrote:
> On 12:08-20230804, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler
> >
> > This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
> > V1.0A module and subsequent V1.1 launch c
From: Marcel Ziswiler
This series adds initial support for the Toradex Verdin AM62 SoM [1].
The first commit adds resp. PID4s to the ConfigBlock, the second one
fixes an early clocking issue confirmed to be a weird bug in TI's
scripting, the third one fixes some binman labeling issue. And
From: Marcel Ziswiler
Fix rcfg_yaml to really point to rm-cfg.yaml and pcfg_yaml to really
point to pm-cfg.yaml which likely is the intention.
While at it also add labels for the remaining items like custmpk_pem,
dkey_pem, bcfg_yaml_sysfw, scfg_yaml_sysfw, pcfg_yaml_sysfw and
rcfg_yaml_sysfw
From: Marcel Ziswiler
Fix second mux option of clkout0 which should really be
DEV_BOARD0_CLKOUT0_IN_PARENT_HSDIV4_16FFT_MAIN_2_HSDIVOUT1_CLK10
rather than twice the same according to [1].
[1]
https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/am62x/clocks.html#clocks-for-board0-device
From: Marcel Ziswiler
Add initial Verdin AM62 Quad 1GB WB IT prototype and launch
configuration SKUs to ConfigBlock handling.
0069: Verdin AM62 Quad 1GB WB IT
0071: Verdin AM62 Solo 512MB
0072: Verdin AM62 Solo 512MB WB IT
0073: Verdin AM62 Dual 1GB ET
0074: Verdin AM62 Dual 1GB IT
0075: Verdin
Hi Neha
On Fri, 2023-08-04 at 12:04 +0530, Neha Malcom Francis wrote:
> Hi Marcel
>
> Repeating my comments from v4, as I missed seeing this version.
>
> On 03/08/23 19:30, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler
> >
> > This adds initial support for
On Fri, 2023-08-04 at 10:15 +0200, Francesco Dolcini wrote:
> On Fri, Aug 04, 2023 at 08:12:36AM +0000, Marcel Ziswiler wrote:
> > Hi Neha
> >
> > On Fri, 2023-08-04 at 13:35 +0530, Neha Malcom Francis wrote:
> > > Hi Francesco
> > >
> > > On 04/
Hi Neha
On Fri, 2023-08-04 at 13:35 +0530, Neha Malcom Francis wrote:
> Hi Francesco
>
> On 04/08/23 13:24, Francesco Dolcini wrote:
> > On Fri, Aug 04, 2023 at 12:04:59PM +0530, Neha Malcom Francis wrote:
> > > On 03/08/23 19:30, Marcel Ziswiler wrote:
> >
1 - 100 of 1012 matches
Mail list logo
