Hi Stefan,
On Mo, 2024-11-25 at 10:39 +0100, Stefan Wahren wrote:
> Hi Christoph,
>
> Am 25.11.24 um 09:28 schrieb Christoph Stoidner:
> > Hi Stefan,
> >
> > On Do, 2024-11-21 at 11:12 +0100, Stefan Wahren wrote:
> > > Hi Christoph,
> > >
> >
Hi Stefan,
On Do, 2024-11-21 at 11:12 +0100, Stefan Wahren wrote:
> Hi Christoph,
>
> Am 20.11.24 um 17:31 schrieb Christoph Stoidner:
>
[...]
> >
> > diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> > b/arch/arm/dts/imx93-phyboard-segin-u-
eprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner
Reviewed-by: Wadim Egorov
Reviewed-by: Yannic Moog
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Stefano Babic
Cc: Fabio Estevam
Cc: "
and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner
Reviewed-by: Wadim Egorov
Reviewed-by: Yannic Moog
---
Cc
DDR Tool.
Signed-off-by: Christoph Stoidner
Tested-by: Primoz Fiser
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Tom Rini
Cc: Yannic Moog
Cc: Primoz Fiser
Cc: Andrej Picej
Cc: Wadim Egorov
---
No changes in v4
No changes in v3
Changes in v2:
- remove multiple blank lines
- add
imx93-phyboard-segin_defconfig and add needed CONFIGs,
instead of creating an entirely new second defconfig
- remove wrong comment from imx93-phyboard-segin-u-boot.dtsi
- improve commit message
Christoph Stoidner (3):
board: phytec: phycore-imx93: Add 2GB LPDDR4X RAM timings
board: phytec: imx93
dhc_set_timing error -38
> > Select HS400ES failed -38
> > unable to select a mode: -5
> > u-boot=>
>
> This means, HS400 is properly selected but I guess you forgot to add
> ushdc1 pinctrl settings for 100 and 200MHz modes (HS400).
True, pinctrl_usdhc1_100mhz_and pinct
On Do, 2024-11-14 at 07:30 +0100, Yannic Moog wrote:
> Hi Christoph,
>
> On Wed, 2024-11-13 at 17:00 +0100, Christoph Stoidner wrote:
> > The phyCORE-i.MX 93 is available in various variants. Relevant
> > variant
> > options for the spl/u-boot are:
> > - with
On Do, 2024-11-14 at 09:37 +0100, Primoz Fiser wrote:
> Hi Christoph,
>
> On 13. 11. 24 17:00, Christoph Stoidner wrote:
> > The phyCORE-i.MX 93 is available in various variants. Relevant
> > variant
> > options for the spl/u-boot are:
> > - with or without HS40
DDR Tool.
Signed-off-by: Christoph Stoidner
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Tom Rini
Cc: Yannic Moog
Cc: Primoz Fiser
Cc: Andrej Picej
Cc: Wadim Egorov
---
No changes in v3
Changes in v2:
- remove multiple blank lines
- add update of 1GB ram timings to commit message
and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner
Reviewed-by: Wadim Egorov
---
Cc: Mathieu Othacehe
Cc
eprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner
Reviewed-by: Wadim Egorov
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Stefano Babic
Cc: Fabio Estevam
Cc: "NXP i.MX U-Boot Team"
from imx93-phyboard-segin-u-boot.dtsi
- improve commit message
Christoph Stoidner (3):
board: phytec: phycore-imx93: Add 2GB LPDDR4X RAM timings
board: phytec: imx93: Add eeprom-based hardware introspection
board: phytec: imx93: Add phyCORE-i.MX 93 support for all SOM variants
arch/ar
gt;
> Thanks,
> BR,
> Primoz
>
> On 13. 11. 24 17:00, Christoph Stoidner wrote:
> > The phyCORE-i.MX 93 is available in various variants (e.g.
> > different ram
> > sizes, eMMC HS400 yes/no). Enable hardware introspection for the
> > imx93-phyboard-segin_def
On Do, 2024-11-14 at 14:27 +0100, Yannic Moog wrote:
> On Thu, 2024-11-14 at 12:48 +0100, Christoph Stoidner wrote:
> >
> >
> > On Do, 2024-11-14 at 07:37 +0100, Yannic Moog wrote:
> > > On Wed, 2024-11-13 at 17:00 +0100, Christoph Stoidner wrote:
> > >
On Mi, 2024-11-13 at 20:42 +0100, Wadim Egorov wrote:
>
>
> Am 13.11.24 um 17:00 schrieb Christoph Stoidner:
> > The phyCORE-i.MX 93 is available in various variants. Relevant
> > variant
> > options for the spl/u-boot are:
> > - with or without HS400 suppor
On Mi, 2024-11-13 at 20:47 +0100, Wadim Egorov wrote:
>
>
> Am 13.11.24 um 17:00 schrieb Christoph Stoidner:
> > The phyCORE-i.MX 93 is available in various variants (e.g.
> > different ram
> > sizes, eMMC HS400 yes/no). It's eeprom contains information whi
On Do, 2024-11-14 at 07:37 +0100, Yannic Moog wrote:
> On Wed, 2024-11-13 at 17:00 +0100, Christoph Stoidner wrote:
> > The phyCORE-i.MX 93 is available in various variants (e.g.
> > different ram
> > sizes, eMMC HS400 yes/no). Enable hardware introspection for t
On Mi, 2024-11-13 at 15:29 -0300, Fabio Estevam wrote:
> On Wed, Nov 13, 2024 at 1:16 PM Christoph Stoidner
> wrote:
>
> > +
> > + eeprom@50 {
> > + bootph-pre-ram;
> > + bootph-some-ram;
> > + compatible =
DDR Tool.
Signed-off-by: Christoph Stoidner
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Tom Rini
Cc: Yannic Moog
Cc: Primoz Fiser
Cc: Andrej Picej
Cc: Wadim Egorov
---
Changes in v2:
- remove multiple blank lines
- add update of 1GB ram timings to commit message
board/phytec
and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Stefano
eprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner
---
Cc: Mathieu Othacehe
Cc: Christoph Stoidner
Cc: Stefano Babic
Cc: Fabio Estevam
Cc: "NXP i.MX U-Boot Team"
Cc: Tom Rini
Cc: Yannic M
.dtsi
- improve commit message
Christoph Stoidner (3):
board: phytec: phycore-imx93: Add 2GB LPDDR4X RAM timings
board: phytec: imx93: Add eeprom-based hardware introspection
board: phytec: imx93: Add phyCORE-i.MX 93 support for all SOM variants
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
Hi Wadim,
On Di, 2024-11-05 at 08:42 +0100, Wadim Egorov wrote:
> Hi Christoph,
>
> Am 04.11.24 um 12:25 schrieb Christoph Stoidner:
> > The phyCORE-i.MX 93 is available in various variants (e.g.
> > different ram
> > sizes, eMMC HS400 yes/no). Add a new SOM-scoped d
Hi Fabio,
On Mo, 2024-11-04 at 09:30 -0300, Fabio Estevam wrote:
> Hi Christoph,
>
> On Mon, Nov 4, 2024 at 7:52 AM Christoph Stoidner
> wrote:
> >
> > The phyCORE-i.MX 93 is available with a 1GB ram chip or a 2GB ram
> > chip.
> > Add the ram timings
Hi Teresa,
On Mo, 2024-11-04 at 13:16 +0100, Teresa Remmet wrote:
> Hello Christoph,
>
> Am Montag, dem 04.11.2024 um 11:41 +0100 schrieb Christoph Stoidner:
> > The phyCORE-i.MX 93 is available with a 1GB ram chip or a 2GB ram
> > chip.
> > Add the ram timings for
Hi Wadmin,
On Mo, 2024-11-04 at 14:53 +0100, Wadim Egorov wrote:
> Hi Christoph,
>
> Am 04.11.24 um 11:41 schrieb Christoph Stoidner:
> > The phyCORE-i.MX 93 is available in various variants. Relevant
> > variant
> > options for the spl/u-boot are:
> > - with
Sorry, unfortunately that patch got separated from its patch-series.
Please note, it belongs to the patch-series
"Add support for all variants of the phyCORE-i.MX93 SOM".
On Mo, 2024-11-04 at 12:25 +0100, Christoph Stoidner wrote:
> The phyCORE-i.MX 93 is available in various
resulting SPL and u-boot binary shall able to boot each phyCORE-i.MX93
module variant on each carrier board.
Signed-off-by: Christoph Stoidner
Cc: Mathieu Othacehe , Christoph Stoidner
, Stefano Babic , Fabio Estevam
, "NXP i.MX U-Boot Team" , Tom Rini
, Yannic Moog , Primoz Fiser
, An
eprom data to the spl/u-boot to
enable/disable HS400 and to select the appropriate ram configuration at
startup.
Signed-off-by: Christoph Stoidner
Cc: Mathieu Othacehe , Christoph Stoidner
, Stefano Babic , Fabio Estevam
, "NXP i.MX U-Boot Team" , Tom Rini
, Yannic Moog , Primoz Fiser
The phyCORE-i.MX 93 is available with a 1GB ram chip or a 2GB ram chip.
Add the ram timings for the 2GB chip, in form of a diff compared
to the existing LPDDR4X 1GB timings. With that, the SPL can select the
appropriate timings at startup.
Signed-off-by: Christoph Stoidner
Cc: Mathieu Othacehe
n and enables supported features accordingly.
The resulting spl and u-boot binary is able to boot each phyCORE-i.MX 93 SOM
variant on each carrier board.
Christoph Stoidner (3):
board: phytec: phycore-imx93: Add 2GB LPDDR4X RAM timings
board: phytec: imx93: Add eeprom-based hardware introspe
rch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> new file mode 100644
> index 000..8bf28c2de87
> --- /dev/null
> +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> @@ -0,0 +1,293 @@
> +// SPDX-License-Identifier: (GPL-2.0+ O
33 matches
Mail list logo
