Sorry, unfortunately that patch got separated from its patch-series. Please note, it belongs to the patch-series "Add support for all variants of the phyCORE-i.MX93 SOM".
On Mo, 2024-11-04 at 12:25 +0100, Christoph Stoidner wrote: > The phyCORE-i.MX 93 is available in various variants (e.g. different > ram > sizes, eMMC HS400 yes/no). Add a new SOM-scoped defconfig that makes > use > of the hardware introspection of the phycore-imx93 board-code, to > detect > the SOM module variant, and to configure the hardware accordingly. > The > resulting SPL and u-boot binary shall able to boot each phyCORE- > i.MX93 > module variant on each carrier board. > > Signed-off-by: Christoph Stoidner <c.stoid...@phytec.de> > Cc: Mathieu Othacehe <m.othac...@gmail.com>, Christoph Stoidner > <c.stoid...@phytec.de>, Stefano Babic <sba...@denx.de>, Fabio Estevam > <feste...@gmail.com>, "NXP i.MX U-Boot Team" <uboot-...@nxp.com>, Tom > Rini <tr...@konsulko.com>, Yannic Moog <y.m...@phytec.de>, Primoz > Fiser <primoz.fi...@norik.com>, Andrej Picej > <andrej.pi...@norik.com>, Wadim Egorov <w.ego...@phytec.de> > --- > arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 14 +- > board/phytec/phycore_imx93/MAINTAINERS | 1 + > configs/imx93-phycore_defconfig | 156 > ++++++++++++++++++ > 3 files changed, 169 insertions(+), 2 deletions(-) > create mode 100644 configs/imx93-phycore_defconfig > > diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi > b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi > index 25c778bb07..e84476c38a 100644 > --- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi > +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi > @@ -2,15 +2,25 @@ > /* > * Copyright (C) 2023 PHYTEC Messtechnik GmbH > * Christoph Stoidner <c.stoid...@phytec.de> > + * Copyright (C) 2024 PHYTEC Messtechnik GmbH > * > * Product homepage: > - * phyBOARD-Segin carrier board is reused for the i.MX93 design. > - * https://www.phytec.eu/en/produkte/single-board-computer/phyboard- > segin-imx6ul/ > + https://www.phytec.de/produkte/system-on-modules/phycore-imx-91- > 93/ > */ > > #include "imx93-u-boot.dtsi" > > / { > + > + /* > + * If the u-boot build uses the device tree of a phyCORE- > i.MX93 carrier > + * board (i.E. imx93-phyboard-segin.dts), then this u- > boot.dtsi > + * deactivates all carrier board-specific peripherals. This > means that > + * the resulting SPL and u-boot binary can boot the phyCORE- > i.MX 93 module > + * on each carrier board. > + */ > + model = "PHYTEC phyCORE-i.MX93"; > + > wdt-reboot { > compatible = "wdt-reboot"; > wdt = <&wdog3>; > diff --git a/board/phytec/phycore_imx93/MAINTAINERS > b/board/phytec/phycore_imx93/MAINTAINERS > index cea817ffdc..d6eb5eb287 100644 > --- a/board/phytec/phycore_imx93/MAINTAINERS > +++ b/board/phytec/phycore_imx93/MAINTAINERS > @@ -9,5 +9,6 @@ F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi > F: board/phytec/phycore_imx93/ > F: board/phytec/common/imx93_som_detection.c > F: board/phytec/common/imx93_som_detection.h > +F: configs/imx93-phycore_defconfig > F: configs/imx93-phyboard-segin_defconfig > F: include/configs/phycore_imx93.h > diff --git a/configs/imx93-phycore_defconfig b/configs/imx93- > phycore_defconfig > new file mode 100644 > index 0000000000..2c818d01b7 > --- /dev/null > +++ b/configs/imx93-phycore_defconfig > @@ -0,0 +1,156 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_IMX9=y > +CONFIG_TEXT_BASE=0x80200000 > +CONFIG_SYS_MALLOC_LEN=0x2000000 > +CONFIG_SYS_MALLOC_F_LEN=0x20000 > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_NR_DRAM_BANKS=2 > +CONFIG_ENV_SOURCE_FILE="phycore_imx93" > +CONFIG_ENV_SIZE=0x10000 > +CONFIG_ENV_OFFSET=0x700000 > +CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg" > +CONFIG_DM_GPIO=y > +CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin" > +CONFIG_SPL_TEXT_BASE=0x2049A000 > +CONFIG_PHYTEC_SOM_DETECTION=y > +CONFIG_TARGET_PHYCORE_IMX93=y > +CONFIG_OF_LIBFDT_OVERLAY=y > +CONFIG_SYS_MONITOR_LEN=524288 > +CONFIG_SPL_SERIAL=y > +CONFIG_SPL_DRIVERS_MISC=y > +CONFIG_SPL_STACK=0x20519dd0 > +CONFIG_SPL=y > +CONFIG_ENV_OFFSET_REDUND=0x720000 > +CONFIG_CMD_DEKBLOB=y > +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000 > +CONFIG_SYS_LOAD_ADDR=0x80400000 > +CONFIG_SYS_MEMTEST_START=0x80000000 > +CONFIG_SYS_MEMTEST_END=0x90000000 > +CONFIG_REMAKE_ELF=y > +# CONFIG_ANDROID_BOOT_IMAGE is not set > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_OF_SYSTEM_SETUP=y > +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if test > ${doraucboot} = 1; then run raucinit; fi; if run loadimage; then run > mmcboot; else run netboot; fi; fi;" > +CONFIG_DEFAULT_FDT_FILE="oftree" > +CONFIG_SYS_CBSIZE=2048 > +CONFIG_SYS_PBSIZE=2074 > +CONFIG_ARCH_MISC_INIT=y > +CONFIG_BOARD_LATE_INIT=y > +CONFIG_SPL_MAX_SIZE=0x26000 > +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y > +CONFIG_SPL_BSS_START_ADDR=0x2051a000 > +CONFIG_SPL_BSS_MAX_SIZE=0x2000 > +CONFIG_SPL_BOARD_INIT=y > +CONFIG_SPL_BOOTROM_SUPPORT=y > +CONFIG_SPL_LOAD_IMX_CONTAINER=y > +CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg" > +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 > +CONFIG_SPL_I2C=y > +CONFIG_SPL_POWER=y > +CONFIG_SPL_WATCHDOG=y > +CONFIG_SYS_PROMPT="u-boot=> " > +CONFIG_CMD_ERASEENV=y > +CONFIG_CMD_NVEDIT_EFI=y > +CONFIG_CRC32_VERIFY=y > +CONFIG_CMD_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_BUS=2 > +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > +CONFIG_SYS_EEPROM_SIZE=4096 > +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 > +CONFIG_CMD_MEMTEST=y > +CONFIG_CMD_CLK=y > +CONFIG_CMD_DFU=y > +CONFIG_CMD_FUSE=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_POWEROFF=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +CONFIG_CMD_SNTP=y > +CONFIG_CMD_CACHE=y > +CONFIG_CMD_EFIDEBUG=y > +CONFIG_CMD_RTC=y > +CONFIG_CMD_TIME=y > +CONFIG_CMD_GETTIME=y > +CONFIG_CMD_TIMER=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_CMD_HASH=y > +CONFIG_CMD_EXT4_WRITE=y > +CONFIG_OF_CONTROL=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_ENV_OVERWRITE=y > +CONFIG_ENV_IS_NOWHERE=y > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_SYS_MMC_ENV_DEV=1 > +CONFIG_USE_ETHPRIME=y > +CONFIG_ETHPRIME="eth1" > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_SPL_DM=y > +CONFIG_SYSCON=y > +CONFIG_SPL_CLK_IMX93=y > +CONFIG_CLK_IMX93=y > +CONFIG_CPU=y > +CONFIG_CPU_IMX=y > +CONFIG_DFU_MMC=y > +CONFIG_DFU_RAM=y > +CONFIG_IMX_RGPIO2P=y > +CONFIG_DM_I2C=y > +CONFIG_SYS_I2C_IMX_LPI2C=y > +CONFIG_I2C_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_ADDR=0x50 > +CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_MMC_IO_VOLTAGE=y > +CONFIG_MMC_UHS_SUPPORT=y > +CONFIG_MMC_HS400_ES_SUPPORT=y > +CONFIG_MMC_HS400_SUPPORT=y > +CONFIG_FSL_USDHC=y > +CONFIG_PHY_TI_GENERIC=y > +CONFIG_DM_ETH_PHY=y > +CONFIG_DWC_ETH_QOS=y > +CONFIG_DWC_ETH_QOS_IMX=y > +CONFIG_FEC_MXC=y > +CONFIG_MII=y > +CONFIG_MIPI_DPHY_HELPERS=y > +CONFIG_PHY_IMX93_MIPI_DPHY=y > +CONFIG_PINCTRL=y > +CONFIG_SPL_PINCTRL=y > +CONFIG_PINCTRL_IMX93=y > +CONFIG_POWER_DOMAIN=y > +CONFIG_IMX93_BLK_CTRL=y > +CONFIG_DM_PMIC=y > +CONFIG_DM_PMIC_PCA9450=y > +CONFIG_SPL_DM_PMIC_PCA9450=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_PCA9450=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_REGULATOR_GPIO=y > +CONFIG_DM_RTC=y > +CONFIG_DM_SERIAL=y > +CONFIG_FSL_LPUART=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_SYSRESET=y > +CONFIG_SPL_SYSRESET=y > +CONFIG_SYSRESET_WATCHDOG=y > +CONFIG_DM_THERMAL=y > +CONFIG_IMX_TMU=y > +CONFIG_USB=y > +CONFIG_SPL_USB_HOST=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_GADGET=y > +CONFIG_SPL_USB_GADGET=y > +CONFIG_USB_GADGET_MANUFACTURER="PHYTEC" > +CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9 > +CONFIG_USB_GADGET_PRODUCT_NUM=0x0152 > +CONFIG_CI_UDC=y > +CONFIG_USB_PORT_AUTO=y > +CONFIG_ULP_WATCHDOG=y > +CONFIG_LZO=y > +CONFIG_BZIP2=y
