Hi Albert,
On 10/28/2011 09:17 PM, Albert ARIBAUD wrote:
> Hi Asen,
>
> You should copy Ilko as the maintainer, unless you are taking over
> maintainership of this board (and pm9263 and pm9g45), in which case
> please modify MAINTAINERS file as well.
Ok, I will CC: him next time.
>
> Le 28/10/20
Hello Reinhard,
On 07/26/2011 12:58 PM, Reinhard Meyer wrote:
> Dear Asen Dimov,
>>> I have this as a local patch and could squash this onto yours, or
>>> you may provide an updated patch.
>> I will try once more to make it as it should be.
> The squashed version is
and one forgotten answer ...
On 07/26/2011 12:11 PM, RONETIX - Asen Dimov wrote:
> Hello Reinhard,
>
> On 07/26/2011 10:14 AM, Reinhard Meyer wrote:
>> Dear Asen Dimov,
>>> Signed-off-by: Asen Dimov
>>> ---
>>> Note:
>>> This patch was a part o
Hello Reinhard,
On 07/26/2011 10:14 AM, Reinhard Meyer wrote:
> Dear Asen Dimov,
>> Signed-off-by: Asen Dimov
>> ---
>> Note:
>> This patch was a part of patches, but it is better to be done step by step
>> and
>> so this patch is a split from the patch
Signed-off-by: Asen Dimov
---
Note:
This patch was a part of patches, but it is better to be done step by step and
so this patch is a split from the patch series with message id:
<1307606409-29818-2-git-send-email-di...@ronetix.at>
and Patchwork:
http://patchwork.ozlabs.org/patch/99665/
C
Hi Reinhard,
On 06/09/2011 02:00 PM, Reinhard Meyer wrote:
...
>>> http://patchwork.ozlabs.org/patch/99665/
>>> http://patchwork.ozlabs.org/patch/99666/
>>>
>>> [PM9263]
>>> http://patchwork.ozlabs.org/patch/99662/
>>> http://patchwork.ozlabs.org/patch/99668/
>>>
>>> [PM9G45]
>>> http://patchwork.
Hello Reinhard,
On 06/09/2011 01:57 PM, Reinhard Meyer wrote:
...
> Dear Asen Dimov,
> The empty reset_timer() function added there can obviously only
> solve build issues.
> On any account reset_timer() must not be used anymore.
> As such this patch must get a NAK.
>
The arc
Hello,
I got several instances of the patches, probably you got it too,
so I apology for the mess.
Here is the list of patches:
[PM9261]
http://patchwork.ozlabs.org/patch/99663/
http://patchwork.ozlabs.org/patch/99665/
http://patchwork.ozlabs.org/patch/99666/
[PM9263]
http://patchwork.ozlabs.or
V2:
- put the PHY reset/init code on a proper place, so now
in the config file PHY reset could be enabled/disabled
if nRST signal is not long enough.
Signed-off-by: Asen Dimov
---
board/ronetix/pm9g45/pm9g45.c | 50 +++--
include/configs/pm9g45.h
Hello,
Have anybody made the nand support for mpc5125, especially commads for
flashing first stage boot loader and U-Boot:
nand_e, nand_w and nand_loader, which are implemented in
/fscale/cys/git-freescale/u-boot-2009.03/drivers/mtd/nand/mpc5125_nfc_mtc.c.
The BSP from Freescale has these command
Hello,
Asen Dimov with Message-Id:
<1296141314-9580-1-git-send-email-di...@ronetix.at> wrote:
> Signed-off-by: Asen Dimov
> ---
> board/ronetix/pm9g45/pm9g45.c | 15 +++
> include/configs/pm9g45.h |5 +
> 2 files changed, 20 insertions(+), 0
Signed-off-by: Asen Dimov
---
board/ronetix/pm9g45/pm9g45.c | 15 +++
include/configs/pm9g45.h |5 +
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index 79b7c9d..0e1d6b2 100644
--- a/board
Hello Reinhard,
Reinhard Meyer wrote:
> Dear Asen Dimov,
>>
>> Signed-off-by: Asen Dimov
>> ---
>> arch/arm/include/asm/arch-at91/at91cap9.h|1 +
>> arch/arm/include/asm/arch-at91/at91sam9260.h |1 +
>> arch/arm/include/asm/arch-at91/at91s
Signed-off-by: Asen Dimov
---
arch/arm/include/asm/arch-at91/at91cap9.h|1 +
arch/arm/include/asm/arch-at91/at91sam9260.h |1 +
arch/arm/include/asm/arch-at91/at91sam9261.h |1 +
arch/arm/include/asm/arch-at91/at91sam9g45.h |1 +
arch/arm/include/asm/arch-at91/at91sam9rl.h
Signed-off-by: Asen Dimov
---
board/ronetix/pm9263/config.mk |1 -
board/ronetix/pm9263/pm9263.c |9 -
include/configs/pm9263.h |6 ++
3 files changed, 14 insertions(+), 2 deletions(-)
delete mode 100644 board/ronetix/pm9263/config.mk
diff --git a/board/ronetix
Signed-off-by: Asen Dimov
---
include/configs/pm9261.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index c7f0be9..26e5049 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -203,6 +203,7
Signed-off-by: Asen Dimov
---
drivers/spi/atmel_dataflash_spi.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/atmel_dataflash_spi.c
b/drivers/spi/atmel_dataflash_spi.c
index 4a5c4aa..d5215c0 100644
--- a/drivers/spi/atmel_dataflash_spi.c
+++ b/drivers
Signed-off-by: Asen Dimov
---
board/ronetix/pm9261/config.mk |1 -
board/ronetix/pm9261/pm9261.c |9 -
include/configs/pm9261.h |6 ++
3 files changed, 14 insertions(+), 2 deletions(-)
delete mode 100644 board/ronetix/pm9261/config.mk
diff --git a/board/ronetix
Signed-off-by: Asen Dimov
---
board/ronetix/pm9g45/config.mk |1 -
board/ronetix/pm9g45/pm9g45.c |9 -
include/configs/pm9g45.h |6 ++
3 files changed, 14 insertions(+), 2 deletions(-)
delete mode 100644 board/ronetix/pm9g45/config.mk
diff --git a/board/ronetix
Signed-off-by: Asen Dimov
---
include/configs/pm9263.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index c9e7489..96e12f2 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -214,6 +214,7
Signed-off-by: Asen Dimov
---
include/configs/pm9g45.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 8822012..ec51ccf 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -81,6 +81,7
Signed-off-by: Asen Dimov
---
drivers/misc/Makefile |1 +
drivers/misc/ds2401.c | 265 +
include/ds2401.h | 36 +++
3 files changed, 302 insertions(+), 0 deletions(-)
create mode 100644 drivers/misc/ds2401.c
create mode 100644
Change since [PATCH v2]: use space instead of tab after #define.
Signed-off-by: Asen Dimov
---
arch/arm/include/asm/arch-at91/at91_matrix.h | 138 ++
1 files changed, 138 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h
b/arch
Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401
The board is made as SODIMM200 module.
For more info www.ronatix.at or i...@ronetix.at.
Signed-off-by: Asen Dimov
---
MAINTAINERS
Signed-off-by: Asen Dimov
---
board/ronetix/pm9263/led.c| 15 ++--
board/ronetix/pm9263/pm9263.c | 195 +
include/configs/pm9263.h | 87 +-
3 files changed, 152 insertions(+), 145 deletions(-)
diff --git a/board/ronetix
Signed-off-by: Asen Dimov
---
arch/arm/include/asm/arch-at91/at91_matrix.h | 138 ++
1 files changed, 138 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h
b/arch/arm/include/asm/arch-at91/at91_matrix.h
index 981ec20..f99b1d4
Signed-off-by: Asen Dimov
---
arch/arm/include/asm/arch-at91/at91_matrix.h | 138 ++
1 files changed, 138 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h
b/arch/arm/include/asm/arch-at91/at91_matrix.h
index 981ec20..60fd75b
Tom wrote:
> Asen Dimov wrote:
>> Signed-off-by: Asen Dimov
>> ---
>> board/ronetix/pm9263/led.c| 15 ++--
>> board/ronetix/pm9263/pm9263.c | 195
>> +
>> include/configs/pm9263.h | 82 --
Signed-off-by: Asen Dimov
---
board/ronetix/pm9263/led.c| 15 ++--
board/ronetix/pm9263/pm9263.c | 195 +
include/configs/pm9263.h | 82 -
3 files changed, 146 insertions(+), 146 deletions(-)
diff --git a/board/ronetix
Signed-off-by: Asen Dimov
---
include/configs/pm9263.h |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 807dba8..f854f38 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -215,7 +215,6
Signed-off-by: Asen Dimov
---
board/ronetix/pm9261/led.c| 18 +++--
board/ronetix/pm9261/pm9261.c | 152 +++-
include/configs/pm9261.h | 68 +--
3 files changed, 130 insertions(+), 108 deletions(-)
diff --git a/board/ronetix
Signed-off-by: Asen Dimov
---
include/configs/pm9261.h |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 47bb8c0..41e28d3 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -200,7 +200,6
Hello Tom,
In respond of the message <4ba51dad.5020...@windriver.com> you wrote:
there is a second version of the this patch in e-mail with message-id
<1268928021-31632-1-git-send-email-di...@ronetix.at> and subject
<[U-Boot][PATCH v2] add new board pm9g45> from 18.03.2010.
Regards,
Asen
___
: Asen Dimov
---
MAINTAINERS|1 +
MAKEALL|1 +
Makefile |4 +
board/ronetix/pm9g45/Makefile | 54
.../at91sam9m10g45ek => rone
Signed-off-by: Asen Dimov
---
cpu/arm926ejs/at91/clock.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c
index b06d760..ecf91f5 100644
--- a/cpu/arm926ejs/at91/clock.c
+++ b/cpu/arm926ejs/at91/clock.c
@@ -203,7
Signed-off-by: Asen Dimov
---
include/asm-arm/arch-at91/at91_matrix.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/asm-arm/arch-at91/at91_matrix.h
b/include/asm-arm/arch-at91/at91_matrix.h
index 9b3c110..981ec20 100644
--- a/include/asm-arm/arch-at91
Hello Wolfgang,
in the message <20100316190012.84ca750...@gemini.denx.de> form
16.03.2010 at 09:00 PM
+#ifdef CONFIG_LCD
+/*
+ * LCD name TX09D50VM1CCA
+ */
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync:
Hello everyone,
here is the new board PM9G45 from Ronetix GmbH,
based on at91sam9g45 MCU. It has 128MB DDR2 SDRAM, 256MB NAND,
could be with or without DataFlash.
The board is made as SODIMM200 module.
For more info www.ronatix.at or i...@ronetix.at.
Regards,
Asen
Signed-off-by: Asen Dimov
Board PM9G45 from Ronetix GmbH. Based on at91sam9g45 MCU.
It has 128MB DDR2 SDRAM, 256MB NAND, could be with or without
DataFlash. The board is made as SODIMM200 module.
For more info www.ronatix.at or i...@ronetix.at.
Signed-off-by: Asen Dimov
---
MAKEALL
39 matches
Mail list logo
