Hi Andrew,
On 02/04/24 21:39, Andrew Davis wrote:
This extra binding is non-standard and now unneeded as we bind the
sysreset driver automatically. This matches what is done in Linux
and allows us to more closely match the DTBs. Remove the binding
and all users.
Signed-off-by: Andrew Davis
---
Hi Andrew
On 02/04/24 21:39, Andrew Davis wrote:
The sysreset TI-SCI API is available with TI-SCI always, there is no need
for a DT node to describe the availability of this. If the sysreset driver
is available then bind it during ti-sci probe.
Remove the unneeded device tree matching.
Signed-
On 3/27/24 10:58 AM, MD Danish Anwar wrote:
> ICSSG firmware supports FDB commands. Add support to send FDB commands
> from driver. Once rx_flow_id is obtained from dma, let firmware know that
> we are using this rx_flow_id by sending a FDB command.
>
> Signed-off-by: MD Danish Anwar
> ---
>
On 3/27/24 10:58 AM, MD Danish Anwar wrote:
> This is the PRUSS Ethernet driver for TI AM654 Sr2.0 and laterSoCs with
s/Sr2.0/SR2.0
s/laterSoCs/later SoCs
> the ICSSG PRU Sub-system running EMAC firmware. ICSSG Subsystem supports
> two slices per instance. This driver caters to both slices / p
On 3/27/24 10:58 AM, MD Danish Anwar wrote:
> Add icssg_queue.c file. This file introduces macros and APIs related to
> ICSSG queues. These will be used by ICSSG Ethernet driver.
>
> Signed-off-by: MD Danish Anwar
> ---
> drivers/net/ti/icssg_prueth.h | 5
> drivers/net/ti/icssg_queues.
On 3/27/24 10:58 AM, MD Danish Anwar wrote:
> Add icssg_config.h / .c and icssg_classifier.c files. These are firmware
> configuration and classification related files. Add MII helper APIs and
> MACROs. These APIs and MACROs will be later used by ICSSG Ethernet driver.
> Also introduce icssg_pru
On 3/27/24 10:58 AM, MD Danish Anwar wrote:
> Add firmware interface related headers and macros for ICSSG Ethernet
> driver. These macros will be later used by the ICSSG ethernet driver.
>
> Signed-off-by: MD Danish Anwar
> ---
> drivers/net/ti/icssg_switch_map.h | 209 +++
Hi Michael
Sorry for the late response.
On 28/03/24 17:26, Michael Walle wrote:
Hi,
On Thu Mar 28, 2024 at 12:18 PM CET, Neha Malcom Francis wrote:
On 27-Mar-24 8:03 PM, Michael Walle wrote:
On Wed Mar 27, 2024 at 8:01 AM CET, Neha Malcom Francis wrote:
On 26/03/24 19:18, Michael Walle wrot
On Sun, 31 Mar 2024 at 21:34, Jonas Karlman wrote:
>
> Sync rk3399-rock960 related device tree from linux v6.8.
TBH I wouldn't class this as "Sync device tree from linux v6.8", it
does a dozen other things as well!
> Add DM_RESET=y to support reset signals.
>
> Add PCI=y, CMD_PCI=y and NVME_PCI=
On Tue, 2 Apr 2024 at 15:37, Caleb Connolly wrote:
>
> Hi Sumit,
>
> On 01/04/2024 06:46, Sumit Garg wrote:
> > On Thu, 28 Mar 2024 at 23:29, Caleb Connolly
> > wrote:
> >>
> >> From: Bhupesh Sharma
> >>
> >> Some Qualcomm SoCs newer than SDM845 feature a so-called "7nm phy"
> >> driver, notabl
On Sun, 31 Mar 2024 at 21:30, Jonas Karlman wrote:
>
> The rk3399-ficus board is only using SPL and not TPL+SPL like all other
> RK3399 boards, chromebook bob/kevin excluded. It does not seem to be any
> technical reason why this board was left using only SPL.
>
> Switch to use TPL+SPL and use com
On Sun, 31 Mar 2024 at 21:29, Jonas Karlman wrote:
>
> The RK3399 SoC contain a crypto engine block that can generate random
> numbers.
>
> Imply DM_RNG and RNG_ROCKCHIP Kconfig options to take advantage of the
> random generator on all RK3399 boards.
>
> Signed-off-by: Jonas Karlman
Reviewed-by:
Hi Jonas,
Overall this series looks good, and I'll be able to test it fro next
week when I'm back near devices.
> This series adds support for new clocks used in linux v6.8 device trees,
> enables use of FIT signature check for checksum validation and fixes
> loading FIT from SD-card when loading
On 4/2/24 13:32, Laurent Pinchart wrote:
Hi Florian,
On Tue, Apr 02, 2024 at 01:18:35PM -0700, Florian Fainelli wrote:
On 4/2/24 13:08, Laurent Pinchart wrote:
On Tue, Apr 02, 2024 at 09:52:06PM +0200, Stefan Wahren wrote:
Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov:
On 2024-03-28 01:37, Lau
Hi,
On 2/28/24 05:18, c...@mailbox.org wrote:
> From: max
>
> Currently fetching files bigger that cause a data transfer greater than
> U16_MAX fails.
>
> The reason is that the specification defines the datalength register
> as a 16 bit wide register, but in u-boot it is used as if it is an
>
On 4/3/2024 8:43 AM, Jaehoon Chung wrote:
Hi
On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
From: Yang Xiwen
The value defaults to 0 and is ignored by dw_mmc code, so the other
users are not affected.
Setting this explicitly fixes some weird reading error found on Hi3798MV200.
Fixes: 8a5dc
On 4/3/2024 8:41 AM, Jaehoon Chung wrote:
Hi,
On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
From: Yang Xiwen
As described in [1], some poor hardware or cards would fail to release
the bus and keep driving data lines low. Ignore it and send the next cmd
directly seems okay for most cases.
T
On 2/25/24 07:32, Marek Vasut wrote:
> Do not access SCC when sending commands during tuning operation as that
> will disrupt the tuning operation. The tuning operation is adjusting the
> SCC settings itself in execute_tuning callback.
>
> When renesas_sdhi_execute_tuning() is called by the MMC co
On 2/25/24 07:32, Marek Vasut wrote:
> Set generic mmc->tuning flag when performing tuning to indicate
> this condition to drivers. Drivers may use this to bypass various
> checks during tuning.
>
> Signed-off-by: Marek Vasut
Reviewed-by: Jaehoon Chung
Best Regards,
Jaehoon Chung
> ---
> Cc:
On 4/3/2024 8:39 AM, Jaehoon Chung wrote:
Hi,
On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
From: Yang Xiwen
This can avoid hardcoding a clock rate in driver. Also can enable the
clocks and deassert the resets if the pre-bootloader does not do this
for us.
Currently only enabled for Hi3798
On 2/25/24 07:32, Marek Vasut wrote:
> This hs400_tuning is a flag, make it bool. No functional change.
> This will be useful in the following patch, which adds another
> more generic flag, where the compiler can better use the space
> now reserved for the u8 to store more flags in it.
>
> Signed-
On 2/20/24 17:38, Marek Vasut wrote:
> The current code uses the state of tuning block received by SCC to
> determine whether or not to send transmission stop command. This is
> not correct. Use the state of tuning block transfer to determine
> whether or not to send transmission stop command inste
On 2/20/24 17:38, Marek Vasut wrote:
> In case a CRC error occurs during DMA transfer, the transfer completion
> flag is not set in TMIO_SD_DMA_INFO1 and the transfer would eventually
> time out. The timeout could be very long in case the transfer consists
> of a large amount of blocks, the base ti
On 2/8/24 18:33, Linus Walleij wrote:
> The PL180/MMCI driver is implied to use CONFIG_DM and the ARM
> defconfigs such as configs/vexpress_ca9x4_defconfig will get it
> as well.
>
> With a simple oneline to default to not being the v2 variant,
> the original ARM MMCI variant works fine with the d
Hi
On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen
>
> The value defaults to 0 and is ignored by dw_mmc code, so the other
> users are not affected.
>
> Setting this explicitly fixes some weird reading error found on Hi3798MV200.
>
> Fixes: 8a5dc8140e62 ("mmc: hi6220_dw_mmc:
Hi,
On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen
>
> As described in [1], some poor hardware or cards would fail to release
> the bus and keep driving data lines low. Ignore it and send the next cmd
> directly seems okay for most cases.
This patch seems to be same with prev
Hi,
On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen
>
> This can avoid hardcoding a clock rate in driver. Also can enable the
> clocks and deassert the resets if the pre-bootloader does not do this
> for us.
>
> Currently only enabled for Hi3798MV200.
>
> Signed-off-by: Yang
On 1/28/24 02:12, Jonas Karlman wrote:
> With MMC_PWRSEQ enabled the following link issue may happen when
> building SPL and SPL_PWRSEQ is not enabled.
>
> aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function
> `meson_mmc_probe':
> drivers/mmc/meson_gx_mmc.c:295: undefined refere
Hi,
On 1/28/24 01:29, Jonas Karlman wrote:
> The alignment hole caused by cmdidx in struct mmc_cmd cause strange
> issues together with the peephole2 optimization on Amlogic SoCs.
> Following was observed while working on SPL support for Amlogic SoCs.
>
> sd_get_capabilities() normally issue a CM
Hi,
On 1/26/24 12:29, Yang Xiwen wrote:
> As described in [1], some poor hardware or cards would fail to release
> the bus and keep driving data lines low. Ignore it and send the next cmd
> directly seems okay for most cases.
I didn't test on my board. But it's not same with below patch.
Did you
On 1/24/24 01:18, Heinrich Schuchardt wrote:
> U-Boot does not support building kernel modules.
>
> Fixes: 3c0dbed232bd ("mmc: arm_pl180_mmci: adapt driver to DM usage")
> Fixes: 36645f45a048 ("drivers: mmc: Add sdhci driver for Broadcom iProc
> platform")
> Fixes: dadd43c14368 ("mmc: synquacer:
On 1/4/24 12:49, Heinrich Schuchardt wrote:
> If the CSD register contains a reserved value (4 - 7) in bits 0:2 of the
> TRAN_SPEED field, a buffer overrun occurs. Resize the mapping table.
>
> According to the original report
> https://lore.kernel.org/u-boot/20180826231332.2491-11-ero...@de.adit-
Hi Jonas,
On Sun, 2024-03-31 at 20:28 +, Jonas Karlman wrote:
> Sync rk3399-rock-pi-4 related device tree from linux v6.8.
>
> Add SPI flash related options to support booting from SPI flash.
>
> Add AHCI=y, SCSI_AHCI=y, AHCI_PCI=y and SCSI=y to support PCIe SATA boot.
>
> Change to SPL_MAX
Hi Florian,
On Tue, Apr 02, 2024 at 01:18:35PM -0700, Florian Fainelli wrote:
> On 4/2/24 13:08, Laurent Pinchart wrote:
> > On Tue, Apr 02, 2024 at 09:52:06PM +0200, Stefan Wahren wrote:
> >> Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov:
> >>> On 2024-03-28 01:37, Laurent Pinchart wrote:
> On
On 4/2/24 01:58, Ivan T. Ivanov wrote:
Hi,
On 2024-03-28 01:37, Laurent Pinchart wrote:
On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote:
Hi,
[add Peter and Ivan]
Am 26.03.24 um 20:58 schrieb Laurent Pinchart:
> Hello,
>
> This small series includes a few drive-by fixes for DT
Hi Laurent,
Am 02.04.24 um 22:08 schrieb Laurent Pinchart:
Hello,
...
Stefan, I'm quite unfamiliar with the Raspberry Pi upstreaming process
(despite having sent patches for ages :-)), do I understand correctly
that this patch will go through your tree, or do I need to work with
someone else
On 4/2/24 13:08, Laurent Pinchart wrote:
Hello,
On Tue, Apr 02, 2024 at 09:52:06PM +0200, Stefan Wahren wrote:
Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov:
On 2024-03-28 01:37, Laurent Pinchart wrote:
On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote:
Hi,
[add Peter and Ivan]
A
Hello,
On Tue, Apr 02, 2024 at 09:52:06PM +0200, Stefan Wahren wrote:
> Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov:
> > On 2024-03-28 01:37, Laurent Pinchart wrote:
> >> On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote:
> >>> Hi,
> >>>
> >>> [add Peter and Ivan]
> >>>
> >>> Am 26.03.
Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov:
Hi,
On 2024-03-28 01:37, Laurent Pinchart wrote:
On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote:
Hi,
[add Peter and Ivan]
Am 26.03.24 um 20:58 schrieb Laurent Pinchart:
> Hello,
>
> This small series includes a few drive-by fixes f
On Tue, Apr 2, 2024 at 6:41 AM Michal Simek wrote:
>
>
>
> On 4/1/24 01:28, James Hilliard wrote:
> > There are situations where we may want to let U-Boot modify the FDT
> > nand partitions for the kernel, such as when supporting multiple
> > sizes of NAND chips.
> >
> > Signed-off-by: James Hilli
Maxim Kiselev schrieb am Di., 2. Apr. 2024, 19:19:
> i, Heinrich!
>
> вт, 2 апр. 2024 г. в 17:47, Heinrich Schuchardt
> :
> >
> > On 30.03.24 18:59, Maksim Kiselev wrote:
> > > Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
> > >
> > > Signed-off-by: Maksim Kiselev
> >
>
Hi, Sean
вт, 2 апр. 2024 г. в 18:39, Sean Anderson :
>
> On 3/30/24 13:59, Maksim Kiselev wrote:
> > Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
> >
> > Signed-off-by: Maksim Kiselev
> > ---
> > drivers/mmc/Kconfig | 12 +
> > drivers/mmc/Makefile | 1 +
> > drivers/mmc/s
Hi Fabio,
Am 01.04.24 um 12:13 schrieb Christian Gmeiner:
> Hi Fabio
>
>> From: Josua Mayer
>>
>> The i.MX6 Cubox-i and HummingBoards can have different PHYs at varying
>> addresses. U-Boot needs to auto-detect which phy is actually present,
>> and at which address it is responding.
>>
>> Auto-de
i, Heinrich!
вт, 2 апр. 2024 г. в 17:47, Heinrich Schuchardt
:
>
> On 30.03.24 18:59, Maksim Kiselev wrote:
> > Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
> >
> > Signed-off-by: Maksim Kiselev
>
> Thank you for driving the TH1520 support forward.
>
> Locally I updated
Hi Chris,
On 4/1/24 20:14, Chris Morgan wrote:
From: Chris Morgan
Switch all RK3568 and RK3588 boards to use the ATAGS based RAM bank
logic. This allows us to access all RAM when >= 4GB of RAM is available
while also automatically creating the memory holes when >= 16GB of RAM
is available.
Re
Hi Chris,
On 4/1/24 20:14, Chris Morgan wrote:
From: Chris Morgan
Allow RK3568 and RK3588 based boards to get the RAM bank configuration
from the ROCKCHIP_TPL stage instead of the current logic. This fixes
both an issue where 256MB of RAM is blocked for devices with >= 4GB
of RAM and where mem
The sysreset TI-SCI API is available with TI-SCI always, there is no need
for a DT node to describe the availability of this. If the sysreset driver
is available then bind it during ti-sci probe.
Remove the unneeded device tree matching.
Signed-off-by: Andrew Davis
---
drivers/firmware/ti_sci.c
This extra binding is non-standard and now unneeded as we bind the
sysreset driver automatically. This matches what is done in Linux
and allows us to more closely match the DTBs. Remove the binding
and all users.
Signed-off-by: Andrew Davis
---
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 7
Hello all,
Idea here is to remove one more delta between the U-Boot and Linux
DTB files: ti,sci-sysreset. We currently have to add this to every
board's -u-boot.dtsi file as this is not a standard node. Instead do
what we are moving the kernel towards[0] and remove this node.
Thanks,
Andrew
[0]
On 3/30/24 13:59, Maksim Kiselev wrote:
> Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
>
> Signed-off-by: Maksim Kiselev
> ---
> drivers/mmc/Kconfig | 12 +
> drivers/mmc/Makefile | 1 +
> drivers/mmc/snps_sdhci.c | 464 +++
Hi Jonas,
On Thursday, March 14, 2024 2:38:30 P.M. EDT Jonas Karlman wrote:
> Hi Detlev,
>
> On 2024-03-14 15:43, Detlev Casanova wrote:
> > Set the MAC address based on the CPU ID only if the ethernet device has
> > no ROM or DT address set.
>
> This patch changes behavior and once again requir
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
This series adds support for new clocks used in linux v6.8 device trees,
enables use of FIT signature check for checksum validation and fixes
loading FIT from SD-card when loading FIT from eMMC fails.
After this series it should be possible to mo
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
Sync rk3399-puma related device tree from linux v6.8.
SPL_MAX_SIZE is not adjusted to the now common 0x4 (256 KiB) due to
TPL+SPL combined (idbloader.img) is limited to max 224 KiB because of:
SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
Becau
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
Sync RK3399 SoC common .dtsi-files from linux v6.8.
The ethernet0 alias is removed from rk3399.dtsi in this patch, it will
be restored in board specific .dts-files. There is no other intended
Please add ethernet0 alias to rk3399-u-boot.dtsi and
On 30.03.24 18:59, Maksim Kiselev wrote:
Add support for DesignWare SDHCI host controller on Alibaba TH1520 SoC
Signed-off-by: Maksim Kiselev
Thank you for driving the TH1520 support forward.
Locally I updated the Lichee Pi4A device-tree based on the Linux
device-tree and built th1520_lpi4a
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
The SCLK_USB3OTGx_REF clocks is used as reference clock for USB3 block.
Add simple support to get rate of SCLK_USB3OTGx_REF clocks to fix
reference clock period configuration.
Also replace use of 2400 with the OSC_HZ constant.
Signed-off-by
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
rk3399-nanopi-4.dtsi try to set parent of and set rate to 100 MHz of the
SCLK_PCIEPHY_REF clock.
The existing enable/disable ops for SCLK_PCIEPHY_REF already handles
setting correct parent once the clock gets enabled. And 100 MHz is the
default r
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
When RK3399 boards run SPL from eMMC and fail to load FIT from eMMC due
to it being missing or checksum validation fails there can be a fallback
to read FIT from SD-card. However, without proper pinctrl configuration
reading FIT from SD-card may f
ID code is added for zu3teg variant.
Signed-off-by: Venkatesh Yadav Abbarapu
---
drivers/soc/soc_xilinx_zynqmp.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/soc/soc_xilinx_zynqmp.c b/drivers/soc/soc_xilinx_zynqmp.c
index 786825d920..d8b4f172a3 100644
--- a/drivers/soc/soc
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
The TPL and/or SPL control FDT on RK3399 boards does not contain any
node with a compatible that is supported by driver/misc/ drivers.
Remove use of xPL_MISC_DRIVERS options to stop including e.g an unused
efuse driver in TPL and/or SPL.
This
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
A lot of RK3399 boards use a u-boot,spl-boot-order of "same-as-spl",
&sdhci and &sdmmc.
Move this to rk3399-u-boot.dtsi and make this default for boards
currently missing a u-boot,spl-boot-order prop.
The &spi_flash reference has been dropped fr
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
Imply OF_LIBFDT_OVERLAY Kconfig options to add device tree overlay
support on all RK3399 boards.
Signed-off-by: Jonas Karlman
Reviewed-by: Quentin Schulz
Thanks,
Quentin
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
Imply support for GbE PHY status parsing and configuration when support
for onboard ethernet is enabled.
Signed-off-by: Jonas Karlman
Reviewed-by: Quentin Schulz
Thanks,
Quentin
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
The RK3399 SoC contain a crypto engine block that can generate random
numbers.
Imply DM_RNG and RNG_ROCKCHIP Kconfig options to take advantage of the
random generator on all RK3399 boards.
Signed-off-by: Jonas Karlman
Reviewed-by: Quentin Sch
Hi Jonas,
On 4/2/24 15:36, Jonas Karlman wrote:
Hi Quentin,
On 2024-04-02 13:20, Quentin Schulz wrote:
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
[...]
diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi
index e4171bd24d2a..a502a82fae6a 100644
--- a/arch/
Hi Quentin,
On 2024-04-02 15:10, Quentin Schulz wrote:
> Hi Jonas,
>
> On 3/31/24 22:28, Jonas Karlman wrote:
>> The rk3399-ficus board is only using SPL and not TPL+SPL like all other
>> RK3399 boards, chromebook bob/kevin excluded. It does not seem to be any
>> technical reason why this board w
Hi Quentin,
On 2024-04-02 13:20, Quentin Schulz wrote:
> Hi Jonas,
>
> On 3/29/24 20:01, Jonas Karlman wrote:
>
> [...]
>
>> diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi
>> b/arch/arm/dts/rk3588s-u-boot.dtsi
>> index e4171bd24d2a..a502a82fae6a 100644
>> --- a/arch/arm/dts/rk3588s-u-boot.dtsi
Hi Jonas,
On 4/2/24 14:54, Jonas Karlman wrote:
Hi Quentin,
On 2024-04-02 13:11, Quentin Schulz wrote:
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
Imply support for GbE PHY status parsing and configuration when support
for onboard ethernet is enabled.
Signed-off-by: Jonas Karlman
---
Hi Jonas,
On 4/2/24 14:37, Jonas Karlman wrote:
Hi Quentin,
On 2024-04-02 12:38, Quentin Schulz wrote:
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
Extend the Generic RK3566/RK3568 target to also include support for SPI
flash, USB OTG, RockUSB and UMS.
Also fix sdmmc alias, include miss
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
The RK3399 SoC support the ARMv8 Cryptography Extensions, use of ARMv8
crypto can speed up FIT checksum validation in SPL.
Imply ARMV8_SET_SMPEN and ARMV8_CRYPTO to take advantage of the crypto
extensions for SHA256 when validating checksum of FI
Hi,
On 3/28/24 10:01, lukas.funke-...@weidmueller.com wrote:
From: Lukas Funke
This series adds support to enable/disable/lock the jtag interface
from u-boot. This becomes handy if secure boot is used but debugging
should be poissible for non-productions builds.
The series also adds support
On 3/27/24 13:11, lukas.funke-...@weidmueller.com wrote:
From: Lukas Funke
Rename spl_board_init() to spl_soc_init(). SoC specific
implementation should be separated from board specific implementation
in order to be extended by board developers.
Signed-off-by: Lukas Funke
---
Changes in v
Hi Jonas,
On 3/31/24 22:28, Jonas Karlman wrote:
The rk3399-ficus board is only using SPL and not TPL+SPL like all other
RK3399 boards, chromebook bob/kevin excluded. It does not seem to be any
technical reason why this board was left using only SPL.
Switch to use TPL+SPL and use common bss and
On 3/25/24 10:50, Venkatesh Yadav Abbarapu wrote:
Except for Linux no other component (i.e., u-boot, fsbl
or BootRom) of the software stack supports software ecc
engine. So, make hw-ecc as the default ecc mode.
Update the same for mini u-boot nand configuration as well.
Signed-off-by: Venkate
On 3/22/24 13:09, Michal Simek wrote:
Generate dfu_alt_info generation based on information from MTD partitions.
mtd_found_part() is trying to identify MTD partition which code is running
from. If partitions are not defined and location is not found it is going
to previous behavior.
Signed-of
On 3/22/24 13:09, Michal Simek wrote:
Generate description only when CONFIG_SPL_FS_LOAD_PAYLOAD_NAME is not
empty. When name is empty there is no reason to generate description for
it because it is not aligned with dfu rules.
Signed-off-by: Michal Simek
---
Changes in v2:
- New patch is ser
On 3/22/24 12:43, Michal Simek wrote:
Private function for finding out location of environment is not working
when ENV_IS_NOWHERE is disabled.
The reason is that current fallback is ENVL_UNKNOWN when
CONFIG_ENV_IS_NOWHERE is not enabled. The code could be updated like this
- ret
On 3/21/24 16:54, Michal Simek wrote:
From: Vishal Sagar
Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.
The patch was tested on kv260-revB/rev2 and also kr260-revB.
Signed-off-by: Vishal Sagar
Signed-off-by: Michal Simek
---
arch/arm/
Hi Quentin,
On 2024-04-02 12:38, Quentin Schulz wrote:
> Hi Jonas,
>
> On 3/29/24 20:01, Jonas Karlman wrote:
>> Extend the Generic RK3566/RK3568 target to also include support for SPI
>> flash, USB OTG, RockUSB and UMS.
>>
>> Also fix sdmmc alias, include missing pinctrl and add broken-cd prop t
Hi Quentin,
On 2024-04-02 13:11, Quentin Schulz wrote:
> Hi Jonas,
>
> On 3/29/24 20:01, Jonas Karlman wrote:
>> Imply support for GbE PHY status parsing and configuration when support
>> for onboard ethernet is enabled.
>>
>> Signed-off-by: Jonas Karlman
>> ---
>> arch/arm/mach-rockchip/Kconf
On 4/1/24 01:28, James Hilliard wrote:
There are situations where we may want to let U-Boot modify the FDT
nand partitions for the kernel, such as when supporting multiple
sizes of NAND chips.
Signed-off-by: James Hilliard
---
Changes v1 -> v2:
- move partition fixups to board/xilinx/comm
On 02.04.24 13:26, Quentin Schulz wrote:
Hi Heinrich,
On 4/2/24 10:39, Heinrich Schuchardt wrote:
Missing line-feeds in error messages lead to output like:
phy_startup() failed: -110FAILED: -110=>
Output like the following is much easier to read:
phy_startup() failed: -110
FAI
Hi Quentin,
On 2024-04-02 12:28, Quentin Schulz wrote:
> Hi Jonas,
>
> On 3/29/24 20:01, Jonas Karlman wrote:
>> Add .dtb-file entry to Makefile and enable Kconfig options required to
>> configure pinctrl in SPL. Also add missing PHY_ROCKCHIP_NANENG_COMBOPHY.
>>
>> Fixes: 9fdd9a546986 ("board: ro
Hi Quentin,
On 2024-04-02 12:23, Quentin Schulz wrote:
> Hi Jonas,
>
> On 3/29/24 20:01, Jonas Karlman wrote:
>> Sort nodes and props in RK356x/RK3588 u-boot.dtsi alphabetically, nodes
>> is sorted by reg addr then by alphabetical order.
>>
>> This has no intended change beside sorting existing n
Hi,
On 4/2/24 12:01, xiaofengvskuye wrote:
[You don't often get email from xiaofengvsk...@hotmail.com. Learn why this is
important at https://aka.ms/LearnAboutSenderIdentification ]
The SCLK_UART4_PMU clocks is used as reference clock for UART4 block.
Add simple support to get rate of SCLK_UA
The str[] buffer declared in make_flamegraph() is used to hold strings
representing the full call-stacks recorded in traces. The size of this
buffer is currently 500 characters and this works well for the documented
examples.
However, it is possible to exhaust this buffer when processing traces
ca
Hi Heinrich,
On 4/2/24 10:39, Heinrich Schuchardt wrote:
Missing line-feeds in error messages lead to output like:
phy_startup() failed: -110FAILED: -110=>
Output like the following is much easier to read:
phy_startup() failed: -110
FAILED: -110
=>
Signed-off-by: Heinrich
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
[...]
diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi
index e4171bd24d2a..a502a82fae6a 100644
--- a/arch/arm/dts/rk3588s-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-u-boot.dtsi
@@ -121,31 +121,35 @@
};
&cru {
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
Imply support for GbE PHY status parsing and configuration when support
for onboard ethernet is enabled.
Signed-off-by: Jonas Karlman
---
arch/arm/mach-rockchip/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-rockc
Hey all,
It's Tuesday, and for once I'm not late and it's release day and so here
is v2024.04. Once again I want to thank everyone that's contributed to
this release, not just in terms of code, but documentation, testing and
otherwise ensuring things go as smoothly as they can.
In terms of a chan
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
The REF_CLK_USB3OTGx clocks is used as reference clock for USB3 block.
Add simple support to get rate of REF_CLK_USB3OTGx clocks to fix
reference clock period configuration.
Signed-off-by: Jonas Karlman
Reviewed-by: Quentin Schulz
Thanks,
Q
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
Extend the Generic RK3566/RK3568 target to also include support for SPI
flash, USB OTG, RockUSB and UMS.
Also fix sdmmc alias, include missing pinctrl and add broken-cd prop to
fix use of SD-card in linux.
I think we would have benefit with mo
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
Add .dtb-file entry to Makefile and enable Kconfig options required to
configure pinctrl in SPL. Also add missing PHY_ROCKCHIP_NANENG_COMBOPHY.
Fixes: 9fdd9a546986 ("board: rockchip: add Rockchip Toybrick TB-RK3588X board")
Signed-off-by: Jonas K
Hi Jonas,
On 3/29/24 20:01, Jonas Karlman wrote:
Sort nodes and props in RK356x/RK3588 u-boot.dtsi alphabetically, nodes
is sorted by reg addr then by alphabetical order.
This has no intended change beside sorting existing nodes and removing
a duplicated usbdpphy0_grf node.
Signed-off-by: Jona
Hi Sumit,
On 01/04/2024 06:46, Sumit Garg wrote:
On Thu, 28 Mar 2024 at 23:29, Caleb Connolly wrote:
From: Bhupesh Sharma
Some Qualcomm SoCs newer than SDM845 feature a so-called "7nm phy"
driver, notable the SM8250 SoC which will gain U-Boot support in
upcoming patches.
Introduce a driver
The SCLK_UART4_PMU clocks is used as reference clock for UART4 block.
Add simple support to get rate of SCLK_UART4_PMU clocks to fix
reference clock period configuration.
Signed-off-by: xiaofengvskuye
---
drivers/clk/rockchip/clk_rk3399.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/d
The SCLK_UART4_PMU clocks is used as reference clock for UART4 block.
Add simple support to get rate of SCLK_UART4_PMU clocks to fix
reference clock period configuration.
Signed-off-by: xiaofengvskuye
---
drivers/clk/rockchip/clk_rk3399.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/dr
425dc46a2c8ebe6d1a5a7d2d7ac5506aa7783409:
Merge tag 'u-boot-imx-master-20240330' of
https://gitlab.denx.de/u-boot/custodians/u-boot-imx (2024-03-30 14:07:37 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-dfu.git
tags/u-boot-dfu-20240402
for you to fet
orted-updates' into next (2024-03-20 08:39:05
-0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-dfu.git
tags/u-boot-dfu-next-20240402
for you to fetch changes up to 12ac51cdb788b9f8e50cbc4fa3681102882ade33:
usb: udc: dwc3: Fold dwc3_uboot_handle
Hi Mattijs,
On 02/04/2024 09:24, Mattijs Korpershoek wrote:
Hi Caleb,
Thank you for the patch.
On jeu., mars 28, 2024 at 17:59, Caleb Connolly
wrote:
The patch introducing support for dynamic sector sizes changed the types
used in some divisions, resulting in the compiler attempting to use
1 - 100 of 121 matches
Mail list logo
