Sounds good. I reviewed the ATF change upstream. Looks good.
From: Andreas Färber
Sent: Friday, February 16, 2018 7:34 PM
To: Varun Wadekar
Cc: Tom Warren; Jonathan Hunter; linux-te...@vger.kernel.org; U-Boot; Alexander
Graf; Mian Yousaf Kaukab
Subject: Re: How t
Am 16.02.2018 um 07:18 schrieb Varun Wadekar:
> Yes. That's a custom SMC we have for some non-L4T uses. It has not been
> upstreamed yet.
>
> You can add dummy handling in tegra_sip_calls.c to move forward.
Thanks, on my 1.4 based branch I succeeded to boot into Nvidia U-Boot
with the following c
The 'reset' command did not work on Porter because the reset code
was accessing the wrong PMIC address over broken I2C bus driver.
Replace the code with DM-aware code and fix up the PMIC address.
This makes the 'reset' command work again.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
boa
Enable I2C6 bus on Porter to access the PMIC , ie. to reset the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/dts/r8a7791-porter.dts | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/r8a7791-porter.dts b/arch/arm/dts/r8a7791-porter.dts
index bc93bb24e4
Get rid of the SH I2C driver on Porter and enable the IIC driver
instead . The old SH I2C is completely broken on Porter anyway
and the DM/DT capable IIC driver allows access to the PMIC too.
Use the DM/DT capable driver instead.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/port
The IIC on Gen2 is compatible with this driver as well, allow it.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/i2c/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 7dbec775df..9d43690503 100644
--- a/driv
Set those limits to inform U-Boot about FDT and initramfs placement.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
include/configs/porter.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/porter.h b/include/configs/porter.h
index 758ed21c15..1816f2fd76 100644
---
This sets the $loadaddr variable, which is used ie. by tftp/dhcp
command and many others.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
include/configs/rcar-gen2-common.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/rcar-gen2-common.h
b/include/configs/rcar-gen2
Enable cache and time commands, which are convenience tools for
doing benchmarks and various boot tests. Also enable FIT support
for booting fitImage.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/porter_defconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --g
On 02/16/2018 11:23 PM, Joe Hershberger wrote:
> On Wed, Jan 24, 2018 at 4:21 PM, Marek Vasut wrote:
>> Add DM capable code into the SH ethernet driver and support probing
>> both from DT and pdata. The legacy non-DM, non-DT support is retained
>> as there are still systems in the tree which are n
Drop the whole map/unmap_physmem stuff and just use the address
already obtained from DT in ofdata_to_platdata(), instead of
repeating that, wrongly, in probe.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Cc: Joe Hershberger
---
drivers/net/sh_eth.c | 14 --
1 file changed, 4 i
Drop the len variable, it's useless.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Cc: Joe Hershberger
---
drivers/net/sh_eth.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index b3c0509989..bdb054a36a 100644
--- a/drive
Fix minor checkpatch warning about udelay(3000) being too long
and should be replaced by mdelay(3).
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Cc: Joe Hershberger
---
drivers/net/sh_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/sh_eth.c b/drivers/n
Inline this variable which is quite useless.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Cc: Joe Hershberger
---
drivers/net/sh_eth.c | 30 ++
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 5a5c
Hi,
<-Original Message-
; Patrick DELAUNAY
; Christophe KERELLO
<; Christophe PRIOUZEAU
<
http://www.st.com/en/evaluation-tools/stm32746g-eval.html
<
Acked-by: Vikas Manocha
Cheers,
Vikas
<---
< arch/arm/dts/Makefile | 3 +-
< arch/arm/dts/stm32746g-eval.dts | 240
Toggle the PHY reset GPIO to bring the ethernet PHY out of reset properly.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
NOTE: This should be moved to the SH ethernet driver, but it's quite
late in the cycle, so this is something to be done in 2018.05.
---
board/renesas/porter/port
Fix ommission where the u-boot,dm-pre-reloc DT bit was pulled into the
common DT, not the U-Boot specific DT part. Move it to U-Boot DT part.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/dts/r8a7791-porter-u-boot.dts | 4
arch/arm/dts/r8a7791-porter.dts| 1 -
2 fil
Hi Arno,
Welcome.
On Thu, Jan 25, 2018 at 6:08 AM, Arno Steffens wrote:
> Hello,
> Be mild with me - my first patch to u-boot.
Generally this is the type of thing you add after "---" in the message
body, so that it won't be included in the commit log, only in the
email.
Please see http://www.d
On Wed, Jan 24, 2018 at 4:21 PM, Marek Vasut wrote:
> Add DM capable code into the SH ethernet driver and support probing
> both from DT and pdata. The legacy non-DM, non-DT support is retained
> as there are still systems in the tree which are not DM or DT capable.
>
> Signed-off-by: Marek Vasut
On Wed, Jan 24, 2018 at 4:21 PM, Marek Vasut wrote:
> Move the legacy functions around, so that they can be wrapped in a
> massive ifdef CONFIG_DM_ETH once DM support is added. No functional
> change.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> Cc: Joe Hershberger
Acked-by: Joe He
On Wed, Jan 24, 2018 at 4:21 PM, Marek Vasut wrote:
> Split sh_eth_init() function into smaller chunks, which can
> be called from both DM and non-DM code while handling the
> specifics of both configurations.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> Cc: Joe Hershberger
Acked-b
On Wed, Jan 24, 2018 at 4:20 PM, Marek Vasut wrote:
> Pull out the code for writing MAC address into the NIC into a
> separate function, so it can be reused by both DM and non-DM
> code. This is done in preparation for DM support, which handles
> MAC address programming separately.
>
> Signed-off-
On Wed, Jan 24, 2018 at 4:20 PM, Marek Vasut wrote:
> Split sh_eth_recv into two functions, one which checks whether
> a packet was received and one which handles the received packet.
> This is done in preparation for DM support, which handles these
> two parts separately.
>
> Signed-off-by: Marek
On Wed, Jan 24, 2018 at 4:20 PM, Marek Vasut wrote:
> Pass sh_eth_dev structure around instead of eth_device, since the
> later is specific to the legacy networking support. This change is
> done in preparation for the DM addition.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> Cc: Joe
On Wed, Jan 24, 2018 at 4:20 PM, Marek Vasut wrote:
> Use the common RCAR_GEN2 config option instead of enumerating
> each SoC and having a lengthy ifdef clause. No functional change.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> Cc: Joe Hershberger
Acked-by: Joe Hershberger
_
On Wed, Jan 24, 2018 at 4:20 PM, Marek Vasut wrote:
> Cosmetic fix, make ravb_start() static.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> Cc: Joe Hershberger
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.denx.de
https:/
On Fri, Feb 16, 2018 at 1:44 AM, Michal Simek wrote:
> ll_temac driver was used by Xilinx Microblaze big endian and
> Xilinx ppc405/ppc440 SoCs.
>
> ppc support was removed by: "powerpc: remove 4xx support"
> (sha1: 98f705c9cefdfdba62c069821bbba10273a0a8ed)
> and Microblaze BE is not tested for a
On Thu, Feb 15, 2018 at 1:55 AM, Bernhard Messerklinger
wrote:
> Fix commit f1bcad22dd19 ("net: e1000: add support for writing to
> EEPROM").
>
> Signed-off-by: Bernhard Messerklinger
>
Acked-by: Joe Hershberger
___
U-Boot mailing list
U-Boot@lists.d
On Fri, Feb 16, 2018 at 1:01 PM, Sam Protsenko
wrote:
> Hi guys,
>
> TL;DR This is a suggestion about fixing U-Boot log, which has got
> worse recently.
>
> Right now U-Boot and SPL logs are cluttered with bogus warnings like
> these (on X15 board, but I'm pretty sure it should appear on many
> ot
On Wed, Feb 7, 2018 at 1:46 AM, Michal Simek wrote:
> On 6.2.2018 22:11, Joe Hershberger wrote:
>> On Mon, Feb 5, 2018 at 1:17 AM, Michal Simek wrote:
>>> Hi Joe,
>>>
>>> On 2.2.2018 20:35, Joe Hershberger wrote:
Hi Michal,
On Thu, Feb 1, 2018 at 6:42 AM, Michal Simek
wrote:
Hi guys,
TL;DR This is a suggestion about fixing U-Boot log, which has got
worse recently.
Right now U-Boot and SPL logs are cluttered with bogus warnings like
these (on X15 board, but I'm pretty sure it should appear on many
others):
Loading Environment from FAT...
*** Warning - bad CRC
Adds a dedicated defconfig to build TI K2L secure
devices. Created from the k2l_evm_defconfig and
removes support for SPL, as SPL is not supported
on K2 HS devices. Corrects SYS_TEXT_BASE for HS
devices.
Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to
include support for secure image crea
This patch updates the default u-boot env for K2L HS devices
to install the secure boot monitor and load the fitImage during
boot.
Signed-off-by: Madan Srinivas
---
include/configs/k2l_evm.h | 9 +
1 file changed, 9 insertions(+)
diff --git a/include/configs/k2l_evm.h b/include/config
This series adds support for the secure Lammar (K2L) SoC.
It defines a new defconfig file for K2L HS, based on the GP K2L defconfig
and updates the u-boot default env variables to install the secure
boot-monitor on startup.
Madan Srinivas (2):
configs: k2l: Updates u-boot env to install secur
> The gmac for integrated phy need 50M clock, it seems that only
> come from CPLL 600M, the GPLL is not suitable.
>
> Signed-off-by: David Wu
> ---
>
> arch/arm/include/asm/arch-rockchip/cru_rk322x.h | 1 +
> drivers/clk/rockchip/clk_rk322x.c | 11 +++
> 2 files changed,
> In fact, the evb-rk3229 is default supported the integrated phy,
> not need to change any hardware. So it is better to enbale it and
> disable external 1000M phy.
>
> Signed-off-by: David Wu
> ---
>
> arch/arm/dts/rk3229-evb.dts | 22 ++
> 1 file changed, 22 insertions(+)
> The SCLK_MAC_SRC is the same as the SCLK_MAC, it is requested
> by the integrated phy usuage.
>
> Signed-off-by: David Wu
> ---
>
> drivers/clk/rockchip/clk_rk322x.c | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Philipp Tomsich
___
U-Boot m
> It seems that the "CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP)" always
> should not been active.
>
> Signed-off-by: David Wu
> ---
>
> drivers/clk/rockchip/clk_rk3036.c | 2 +-
> drivers/clk/rockchip/clk_rk322x.c | 4 ++--
> drivers/clk/rockchip/clk_rk3288.c | 2 +-
> drivers/clk/rockchip/clk_rk
> The gmac2phy is connected with integrated with phy, we can
> fix the phy node at dtsi level.
>
> Signed-off-by: David Wu
> ---
>
> arch/arm/dts/rk3328.dtsi | 35 +++
> 1 file changed, 35 insertions(+)
>
Acked-by: Philipp Tomsich
_
> The rk3228 and rk3328 Socs both support integrated phy, implement
> their power up function to support it.
>
> Signed-off-by: David Wu
> ---
>
> drivers/net/gmac_rockchip.c | 122
>
> 1 file changed, 122 insertions(+)
>
Acked-by: Philipp Tomsich
> Implement the setting parent and rate for gmac2phy clock, and
> add internal pll div set for gmac2phy clk.
>
> Signed-off-by: David Wu
> ---
>
> drivers/clk/rockchip/clk_rk3328.c | 86
> +++
> 1 file changed, 86 insertions(+)
>
Acked-by: Philipp Tomsich
> In fact, the rk3328-evb is default supported the integrated phy,
> not need to change any hardware. So it is better to enbale it and
> disable external 1000M phy.
>
> Signed-off-by: David Wu
> ---
>
> arch/arm/dts/rk3328-evb.dts | 10 ++
> 1 file changed, 10 insertions(+)
>
Acked-by
> To support the integrated phy for rk322x, add their reset and clock
> property at dtsi level.
>
> Signed-off-by: David Wu
> ---
>
> arch/arm/dts/rk322x.dtsi | 8
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
Acked-by: Philipp Tomsich
_
> Some rockchio Socs have integrated phy inside, to support it,
> add the integrated phy ops.
>
> Signed-off-by: David Wu
> ---
>
> drivers/net/gmac_rockchip.c | 29 +
> 1 file changed, 29 insertions(+)
>
Acked-by: Philipp Tomsich
_
> There is a wrong selection for gmac pll source, fix it.
>
> Signed-off-by: David Wu
> ---
>
> drivers/clk/rockchip/clk_rk322x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lis
> The integtated phy inside the rk3229 and rk3328 need the reset
> request for power up.
>
> Signed-off-by: David Wu
> ---
>
> configs/evb-rk3229_defconfig | 1 +
> configs/evb-rk3328_defconfig | 1 +
> 2 files changed, 2 insertions(+)
>
Acked-by: Philipp Tomsich
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> Acked-by: Philipp Tomsich
> ---
>
> drivers/clk/rockchip/clk_rk3328.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> Acked-by: Philipp Tomsich
> ---
>
> drivers/clk/rockchip/clk_rk3288.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing
> To support the integrated phy for rk322x, add their reset and clock
> property at dtsi level.
>
> Signed-off-by: David Wu
> ---
>
> arch/arm/dts/rk322x.dtsi | 8
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
Reviewed-by: Philipp Tomsich
__
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> Acked-by: Philipp Tomsich
> ---
>
> drivers/clk/rockchip/clk_rk3036.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> Acked-by: Philipp Tomsich
> ---
>
> drivers/clk/rockchip/clk_rk3188.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing
> There is a wrong selection for gmac pll source, fix it.
>
> Signed-off-by: David Wu
> ---
>
> drivers/clk/rockchip/clk_rk322x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@
> The integtated phy inside the rk3229 and rk3328 need the reset
> request for power up.
>
> Signed-off-by: David Wu
> ---
>
> configs/evb-rk3229_defconfig | 1 +
> configs/evb-rk3328_defconfig | 1 +
> 2 files changed, 2 insertions(+)
>
Reviewed-by: Philipp Tomsich
_
> The SCLK_MAC_SRC is the same as the SCLK_MAC, it is requested
> by the integrated phy usuage.
>
> Signed-off-by: David Wu
> ---
>
> drivers/clk/rockchip/clk_rk322x.c | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Philipp Tomsich
___
U-Boo
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> Acked-by: Philipp Tomsich
> ---
>
> drivers/clk/rockchip/clk_rk322x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> Acked-by: Philipp Tomsich
> ---
>
> drivers/clk/rockchip/clk_rv1108.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> ---
>
> drivers/clk/rockchip/clk_rk322x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> ---
>
> drivers/clk/rockchip/clk_rv1108.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> ---
>
> drivers/clk/rockchip/clk_rk3188.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https
> Some Socs both have rgmii and rmii interface, so we need to
> separate their speed setting.
>
> Signed-off-by: David Wu
> ---
>
> drivers/net/gmac_rockchip.c | 62
> +++--
> 1 file changed, 43 insertions(+), 19 deletions(-)
>
Acked-by: Philipp Tomsic
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> ---
>
> drivers/clk/rockchip/clk_rk3328.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> ---
>
> drivers/clk/rockchip/clk_rk3288.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https
> Use live dt api to get cru base addr.
>
> Signed-off-by: Kever Yang
> ---
>
> drivers/clk/rockchip/clk_rk3036.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https
> The rk3228 and rk3328 Socs both have rmii interface, that might be used,
> so add them for usage.
>
> Signed-off-by: David Wu
> ---
>
> drivers/net/gmac_rockchip.c | 115
>
> 1 file changed, 115 insertions(+)
>
Acked-by: Philipp Tomsich
___
> Due to size limitations in SPL by adding falcon mode,
> rk3288 support TPL. In order to not overlap SPL_TEXT_BASE
> add TPL_TEXT_BASE with u-boot-tpl.lds that intern call
> u-boot-spl.lds with proper TEXT_BASE values.
>
> Signed-off-by: Jagan Teki
> ---
> arch/arm/mach-rockchip/Kconfig
> rockchip boot0 add 4 bytes data (0xeaff) at beginning
> of executable(0x800) in order to make generic and compatible
> boot0 for all platforms and the resulting executable will be
> input to mkimage and the output of mkimage with initial
> 4 bytes will overwritten by 'spl_hdr'
>
> Since the
The following changes since commit 32fe36574ea5e6ea55313e16547b98a984af7767:
Merge git://git.denx.de/u-boot-arc (2018-02-15 14:07:04 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-sh.git master
for you to fetch changes up to 5b6ae550a8d88ca8c7b5c39642fe767729422edb:
The following changes since commit 0c502b6c176281a096a23803e517b19e964485f1:
configs: Resync with savedefconfig (2018-02-14 21:34:50 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-socfpga.git master
for you to fetch changes up to fef4a545b696daf7f27f176aae82fd47b117
The following changes since commit 0c502b6c176281a096a23803e517b19e964485f1:
configs: Resync with savedefconfig (2018-02-14 21:34:50 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-usb.git master
for you to fetch changes up to b16c129c2290d26e7b16b4309713c78f6146bc8a
This patch set converts bootcount drivers to Kconfig, it also merges
CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT.
Green Travis build:
https://travis-ci.org/akiernan/u-boot/builds/342294699
This patch has been applied on top of u-boot/master:
SHA1: f116634cd17952a18efb7c8cc6f6a7ef42dd4b8b
Chan
Make generate boot counter selected in the same way as other boot count
drivers
Reviewed-by: Lukasz Majewski
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
drivers/bootcount/Kconfig | 11 +++
drivers/bootcount/Makefile | 2 +-
2 files changed, 12 insertions(
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_I2C
Signed-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski
---
Changes in v3: None
Changes in v2: None
README | 6 --
configs/ids8313_defconfig| 1 +
drivers/bootcount/Kconfig| 9 +
include/
Integrate Boot counter for Atmel AT91SAM9XE into Kconfig
Reviewed-by: Lukasz Majewski
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
README | 4
drivers/bootcount/Kconfig | 5 +
drivers/bootcount/Makefile | 2 +-
3 files changed, 6 insert
Convert CONFIG_BOOTCOUNT_ALEN to Kconfig
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
drivers/bootcount/Kconfig| 9 -
include/configs/ids8313.h| 1 -
scripts/config_whitelist.txt | 1 -
3 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/dr
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_RAM
Signed-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski
---
Changes in v3: None
Changes in v2: None
README | 2 --
configs/km_kirkwood_128m16_defconfig | 1 +
configs/km_kirkwood_defconfig| 1
Ashish,
Please check if this fixes it https://patchwork.ozlabs.org/patch/870653/
York
On 02/16/2018 02:57 AM, Ashish Kumar wrote:
> Hello all,
>
> I am seeing u-boot crash, while I run the latest u-boot on LS1088 for
> SD-Boot(ls1088aqds_sdcard_qspi_defconfig).
> There were some changes relat
Reviewed-by: Lukasz Majewski
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
drivers/bootcount/Kconfig | 25 +++--
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index da2ccab..26
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_EXT
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
README | 7 ---
configs/ge_b450v3_defconfig | 2 ++
configs/ge_b650v3_defconfig | 2 ++
configs/ge_b850v3_defconfig | 2 ++
include/co
Tidy up CONFIG_SYS_BOOTCOUNT_SINGLEWORD from the whitelist as there's
no remaining uses of it left.
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
scripts/config_whitelist.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a/scripts/config_whitelist.txt b/scripts/con
CONFIG_BOOTCOUNT was only used in mx53ppd, merge it with
CONFIG_BOOTCOUNT_LIMIT
Signed-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski
Reviewed-by: Ian Ray
---
Changes in v3:
- Improve commit messages
- Split rename of CONFIG_SYS_BOOTCOUNT_ADDR out to a separate series
Changes in v2:
- Fix
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_ENV
Signed-off-by: Alex Kiernan
Reviewed-by: Lukasz Majewski
---
Changes in v3: None
Changes in v2: None
README | 11 ---
configs/draco_defconfig| 1 +
configs/etamin_defconfig
This converts the following to Kconfig:
CONFIG_BOOTCOUNT_AM33XX
Reviewed-by: Lukasz Majewski
Reviewed-by: Hannes Schmelzer
Acked-by: Hannes Schmelzer
Signed-off-by: Alex Kiernan
---
Changes in v3: None
Changes in v2: None
README| 2 --
drivers/bootcount/Kconfig
Do the following to make the symbol names less confusing.
sed -i "s/\([TU][^_]\+\)_FUNCTION_DFU/DFU_OVER_\1/g" \
`git grep _FUNCTION_DFU | cut -d ":" -f 1 | sort -u`
Signed-off-by: Marek Vasut
Cc: Lukasz Majewski
---
README | 2 +-
board/siemens/common/fac
Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER.
This enables users to block text using CONFIG_IS_ENABLED() instead
of resorting to #if ladders with SPL and non-SPL cases.
Signed-off-by: Faiz Abbas
---
arch/arm/mach-omap2/boot-common.c | 2 +-
board/birdland/bav335x/board.c | 2
Fix two build warnings when building for arm64:
drivers/dfu/dfu_tftp.c: In function ‘dfu_tftp_write’:
drivers/dfu/dfu_tftp.c:59:37: warning: cast to pointer from integer of
different size [-Wint-to-pointer-cast]
ret = dfu_write_from_mem_addr(dfu, (void *)addr, len);
This patch added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET
and enabled it in respective defconfig.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
configs/syzygy_hub_defconfig | 1 +
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 +
configs/
This patch added Kconfig support for CONFIG_ZYNQ_I2C0 and
CONFIG_ZYNQ_I2C1 and enabled it in respective defconfig.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
configs/syzygy_hub_defconfig | 1 +
configs/topic_miami_defconfig | 2 ++
This patch added Kconfig support for CONFIG_XILINX_TB_WATCHDOG
and enabled it in respective defconfig.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
configs/microblaze-generic_defconfig | 1 +
drivers/watchdog/Kconfig | 6 ++
include/configs/microblaze
Clean up the screaming mess of configuration options that DFU is.
It was impossible to configure DFU such that TFTP is enabled and
USB is not, this patch fixes that and assures that DFU TFTP and
DFU USB can be enabled separatelly and that the correct pieces
of code are compiled in.
Signed-off-by:
Hi York,
> > I think you should update your copyright year. Is it right to add
> > 2015-2016 copyright year? Did you have these files then?
Yes, these files were exit during that time. In fact these files were exist
since 2011 with Mindspeed copyright.
We did modifications for LS1012A and using t
This patch added Kconfig support for CONFIG_SYS_ZYNQ_SPI_WAIT
and CONFIG_XILINX_SPI_IDLE_VAL and set default value.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/spi/Kconfig | 12
drivers/spi/xilinx_spi.c | 4
drivers/spi/zynq_spi.c |
This patch added Kconfig support for CONFIG_SYS_ZYNQ_QSPI_WAIT
and set it to default value 10 milliseconds.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/spi/Kconfig | 6 ++
drivers/spi/zynq_qspi.c | 3 ---
2 files changed, 6 insertions(+), 3 deletions
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE
and set it default to 0.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/i2c/Kconfig | 7 +++
include/configs/xilinx_zynqmp.h | 1 -
include/configs/zynq-common.h | 1 -
3 files cha
This seris of patch moved microblaze u-boot headers to the kconfig
and enabled it in respective defconfig.
These are the configs:
-CONFIG_XILINX_GPIO
-CONFIG_XILINX_TB_WATCHDOG
Vipul Kumar (2):
microblaze: Added Kconfig support for CONFIG_XILINX_GPIO
microblaze: wdt: Added Kconfig support for
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED
and set it to default value 10.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/i2c/Kconfig | 7 +++
include/configs/xilinx_zynqmp.h | 1 -
include/configs/zynq-common.h | 1 -
This patch added Kconfig support for CONFIG_FPGA_ZYNQPL.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/fpga/Kconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index ac08bc1..50e9019 100644
--- a/drive
This series of patch moved i2c u-boot headers to
the Kconfig and enabled in respective defconfig.
These are the configs:
-CONFIG_SYS_I2C_ZYNQ
-CONFIG_SYS_I2C_ZYNQ_SLAVE
-CONFIG_SYS_I2C_ZYNQ_SPEED
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET
-CONFIG_ZYNQ_I2C0
-CONFIG_ZYNQ_I2C1
Vipul Kumar (6):
i2c: Added Kco
This seris of patch moved spi headers to Kconfig.
These are the configs:
-CONFIG_SYS_ZYNQ_SPI_WAIT
-CONFIG_XILINX_SPI_IDLE_VAL
-CONFIG_SYS_ZYNQ_QSPI_WAIT
Vipul Kumar (2):
qspi: Added Kconfig support for CONFIG_SYS_ZYNQ_QSPI_WAIT
spi: Added Kconfig support for SYS_ZYNQ_SPI_WAIT and
XILINX_S
This patch added Kconfig support for CONFIG_XILINX_GPIO
and enabled it in respective defconfig.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
configs/microblaze-generic_defconfig | 1 +
drivers/gpio/Kconfig | 5 +
include/configs/microblaze-generic
This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/i2c/Kconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 7dbec77..62d134c 100644
--- a/drivers/
1 - 100 of 129 matches
Mail list logo
