This converts the following to Kconfig:
CONFIG_BOOTCOUNT_EXT
Signed-off-by: Alex Kiernan <alex.kier...@gmail.com>
---
Changes in v3: None
Changes in v2: None
README | 7 -------
configs/ge_b450v3_defconfig | 2 ++
configs/ge_b650v3_defconfig | 2 ++
configs/ge_b850v3_defconfig | 2 ++
include/configs/ge_bx50v3.h | 4 ----
5 files changed, 6 insertions(+), 11 deletions(-)
diff --git a/README b/README
index 2008483..21de2e4 100644
--- a/README
+++ b/README
@@ -2309,13 +2309,6 @@ The following options need to be configured:
- bootcount support:
CONFIG_AT91SAM9XE
enable special bootcounter support on at91sam9xe based boards.
- CONFIG_BOOTCOUNT_EXT
- enable support for the bootcounter in EXT filesystem
- CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
- and write.
- CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
- CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
- CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig
index a5beefe..32f07ab 100644
--- a/configs/ge_b450v3_defconfig
+++ b/configs/ge_b450v3_defconfig
@@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_NETDEVICES=y
diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig
index cbf83b1..188238e 100644
--- a/configs/ge_b650v3_defconfig
+++ b/configs/ge_b650v3_defconfig
@@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_NETDEVICES=y
diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig
index 953681f..96ac173 100644
--- a/configs/ge_b850v3_defconfig
+++ b/configs/ge_b850v3_defconfig
@@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_EXT=y
+CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_NETDEVICES=y
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 8dc0a7f..0a72b58 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -267,10 +267,6 @@
#define CONFIG_BCH
-#define CONFIG_BOOTCOUNT_EXT
-#define CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE "mmc"
-#define CONFIG_SYS_BOOTCOUNT_EXT_DEVPART "1:5"
-#define CONFIG_SYS_BOOTCOUNT_EXT_NAME "/boot/failures"
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x7000A000
#endif /* __GE_BX50V3_CONFIG_H */
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
