On 23.10.2017 22:34, Chen-Yu Tsai wrote:
> On Tue, Oct 24, 2017 at 12:36 AM, Felix Brack wrote:
>> On 23.10.2017 16:36, Chen-Yu Tsai wrote:
>>> Hi,
>>>
>>> On Thu, Oct 12, 2017 at 11:40 PM, Felix Brack wrote:
On 12.10.2017 14:53, Chen-Yu Tsai wrote:
> On Thu, Oct 12, 2017 at 8:24 PM, Fel
On 10/23/2017 01:43 PM, Eugeniy Paltsev wrote:
> On Thu, 2017-10-19 at 13:20 -0500, Dinh Nguyen wrote:
>>
>> On 10/19/2017 10:51 AM, Marek Vasut wrote:
>>> On 10/19/2017 05:36 PM, Eugeniy Paltsev wrote:
On Tue, 2017-10-17 at 20:32 +0530, Jagan Teki wrote:
> On Tue, Oct 17, 2017 at 8:27 PM,
On Monday 23 October 2017 04:54 PM, Tom Rini wrote:
> On Mon, Oct 23, 2017 at 10:50:15AM +0530, Faiz Abbas wrote:
>> Hi Tom,
>>
>> On Monday 23 October 2017 08:30 AM, Tom Rini wrote:
>>> On Mon, Oct 23, 2017 at 08:07:09AM +0530, Lokesh Vutla wrote:
On Wednesday 18 October 2017 05:11 PM, Faiz
On Isn, 2017-10-16 at 10:33 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > These drivers handle FPGA program operation from flash loading
> > RBF to memory and then to program FPGA.
> >
> > Signed-off-by: Tien Fong Che
On Jum, 2017-10-20 at 10:21 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > Enable SPL successfully boot to U-boot.
> s/U-boot/U-Boot
>
> >
> >
> > Signed-off-by: Tien Fong Chee
> > ---
> > configs/socfpga_arria10_d
On Jum, 2017-10-20 at 10:11 -0500, Dinh Nguyen wrote:
> Please update your commit header.
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > SPL configures DDR by programming peripheral raw binary file
> > and calibrating DDR.
> >
> > Signed-off-by
On Isn, 2017-10-23 at 09:24 -0500, Dinh Nguyen wrote:
>
> On 10/23/2017 03:19 AM, Chee, Tien Fong wrote:
> >
> > On Jum, 2017-10-20 at 09:39 -0500, Dinh Nguyen wrote:
> > >
> > >
> > > On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> > > >
> > > >
> > > > From: Tien Fong Chee
> > >
> -Original Message-
> From: York Sun
> Sent: Tuesday, October 24, 2017 2:51 AM
> To: Sumit Garg ; u-boot@lists.denx.de
> Cc: Ruchika Gupta ; Prabhakar Kushwaha
> ; Z.q. Hou ; Pankaj
> Gupta ; Arun Pathak ; Sahil
> Malhotra
> Subject: Re: [PATCH 2/2] armv8: sec_firmware: Add support for lo
> -Original Message-
> From: York Sun
> Sent: Tuesday, October 24, 2017 2:36 AM
> To: Sumit Garg ; u-boot@lists.denx.de
> Cc: Ruchika Gupta ; Prabhakar Kushwaha
> ; Z.q. Hou ; Pankaj
> Gupta ; Arun Pathak ; Sahil
> Malhotra
> Subject: Re: [PATCH 1/2] armv8: layerscape: Allocate 66 MB DDR f
Hi Siva,
On 23/10/17 01:59 AM, Siva Durga Prasad Paladugu wrote:
> Hi Liam,
>
>> -Original Message-
>> From: Liam Beguin [mailto:liambeg...@gmail.com]
>> Sent: Saturday, October 21, 2017 11:33 PM
>> To: Siva Durga Prasad Paladugu ; Jagan Teki
>>
>> Cc: u-boot@lists.denx.de; Michal Simek
Hi Jaehoon
2017-10-23 13:49 GMT+09:00 Jaehoon Chung :
> On 10/23/2017 01:46 PM, Jaehoon Chung wrote:
>> Replace the printf() instead of error().
>> It is occurred the compiler error with "undefined reference to 'error'".
>>
>> Fixes: e0079fecd75b ("mmc: refacstor SD startup to make it easier to su
Hi Andre,
2017-10-24 11:03 GMT+09:00 Lokesh Vutla :
>
>
> On Tuesday 24 October 2017 02:04 AM, Tom Rini wrote:
>> On Mon, Oct 23, 2017 at 11:08:57AM +0530, Lokesh Vutla wrote:
>>>
>>>
>>> On Tuesday 17 October 2017 02:43 AM, Tom Rini wrote:
On Tue, Oct 17, 2017 at 02:29:14AM +0530, Jagan Tek
On Tuesday 24 October 2017 02:04 AM, Tom Rini wrote:
> On Mon, Oct 23, 2017 at 11:08:57AM +0530, Lokesh Vutla wrote:
>>
>>
>> On Tuesday 17 October 2017 02:43 AM, Tom Rini wrote:
>>> On Tue, Oct 17, 2017 at 02:29:14AM +0530, Jagan Teki wrote:
On Mon, Oct 9, 2017 at 10:15 AM, Simon Glass wro
Usb tree/info commands iterate over all usb uclass devices recursively.
Blk uclass devices based on struct blk_desc are created for mass storage
device, treating them as usb uclass devices based on struct usb_device
and referencing usb config interface descriptors cause crash.
To fix, ignore blk an
On 10/23/2017 09:03 AM, Minas Harutyunyan wrote:
> On 10/19/2017 5:35 PM, Dinh Nguyen wrote:
>>
>>
>> On 10/19/2017 06:55 AM, Grigor Tovmasyan wrote:
>>> On 10/18/2017 6:07 PM, Marek Vasut wrote:
On 10/18/2017 04:05 PM, Dinh Nguyen wrote:
> Hi,
>
> I'm trying to bringup the DWC2
Hi Fabio,
On Sat, Oct 21, 2017 at 2:38 PM, Fabio Estevam wrote:
> On Sat, Oct 21, 2017 at 10:34 AM, Benoît Thébaudeau
> wrote:
>
>> I already have a mainline version working at HS with changes only in
>> fsl_esdhc.c (apart from the port of my board). I still have to narrow
>> these changes down
On Mon, Oct 23, 2017 at 11:26:31PM +0200, Heinrich Schuchardt wrote:
> The appended config leads to:
>
> common/usb_storage.c: In function ‘usb_stor_probe_device’:
> common/usb_storage.c:208:32: error: ‘struct usb_device’ has no member
> named ‘dev’; did you mean ‘devnum’?
> data = dev_get_plat
On 10/15/2017 10:03 PM, Udit Agarwal wrote:
> Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase
> using esbc_validate command. Add images validation in default environment
> under mcinitcmd prior to MC initialization.
>
> Add header address for PPA to be validated during ESBC
The appended config leads to:
common/usb_storage.c: In function ‘usb_stor_probe_device’:
common/usb_storage.c:208:32: error: ‘struct usb_device’ has no member
named ‘dev’; did you mean ‘devnum’?
data = dev_get_platdata(udev->dev);
^~~
On Wed, Oct 18, 2017 at 12:10:48AM +0900, Masahiro Yamada wrote:
> In old days, the MTD subsystem in Linux had debug facility like
> DEBUG(MTD_DEBUG_LEVEL1, ...).
>
> They were all replaced with pr_debug() until Linux 3.2. See Linux
> commit 289c05222172 ("mtd: replace DEBUG() with pr_debug()").
On 09/01/2017 01:25 AM, Sumit Garg wrote:
> Enable support for loadables in SEC firmware FIT image. Currently support
> is added for single loadable image.
>
> Brief description of implementation:
> - Add two more address pointers (loadable_h, loadable_l) as arguments to
> sec_firmware_init() ap
On 09/01/2017 01:24 AM, Sumit Garg wrote:
> Change DDR allocated for secure memory from 2 MB to 66 MB. This additional
> 64 MB secure memory is required for trusted OS running in Trusted Execution
> Environment using ARMv8 TrustZone.
>
> Signed-off-by: Sumit Garg
> ---
> arch/arm/include/asm/arc
On 09/14/2017 02:26 PM, York Sun wrote:
> On 08/30/2017 03:43 AM, Shengzhou Liu wrote:
>> Signed-off-by: Shengzhou Liu
>> ---
>> include/configs/ls1043a_common.h | 11 ++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/configs/ls1043a_common.h
>> b/includ
On Tue, Oct 24, 2017 at 12:36 AM, Felix Brack wrote:
> On 23.10.2017 16:36, Chen-Yu Tsai wrote:
>> Hi,
>>
>> On Thu, Oct 12, 2017 at 11:40 PM, Felix Brack wrote:
>>> On 12.10.2017 14:53, Chen-Yu Tsai wrote:
On Thu, Oct 12, 2017 at 8:24 PM, Felix Brack wrote:
> On 12.10.2017 04:46, Chen-
On Mon, Oct 23, 2017 at 11:08:57AM +0530, Lokesh Vutla wrote:
>
>
> On Tuesday 17 October 2017 02:43 AM, Tom Rini wrote:
> > On Tue, Oct 17, 2017 at 02:29:14AM +0530, Jagan Teki wrote:
> >> On Mon, Oct 9, 2017 at 10:15 AM, Simon Glass wrote:
> >>> Hi Andre,
> >>>
> >>> On 4 October 2017 at 17:24
On Tue, Oct 24, 2017 at 02:43:00AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
> 2017-10-24 1:05 GMT+09:00 Tom Rini :
> > On Mon, Oct 23, 2017 at 01:14:57AM +0900, Masahiro Yamada wrote:
> >
> >> Hi Tom,
> >>
> >>
> >> This was late for -rc2 for some reason, but it includes
> >> what I intended to i
Hi Tom,
2017-10-24 1:05 GMT+09:00 Tom Rini :
> On Mon, Oct 23, 2017 at 01:14:57AM +0900, Masahiro Yamada wrote:
>
>> Hi Tom,
>>
>>
>> This was late for -rc2 for some reason, but it includes
>> what I intended to include in it.
>> Some fixes, remove unused CONFIG, DT sync, etc.
>> Please pull.
>>
>
On 23.10.2017 16:36, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Oct 12, 2017 at 11:40 PM, Felix Brack wrote:
>> On 12.10.2017 14:53, Chen-Yu Tsai wrote:
>>> On Thu, Oct 12, 2017 at 8:24 PM, Felix Brack wrote:
On 12.10.2017 04:46, Chen-Yu Tsai wrote:
> On Mon, Oct 9, 2017 at 6:04 PM, Felix Br
On Mon, Oct 23, 2017 at 01:28:06PM +0530, Faiz Abbas wrote:
> Mark bandgap node as uboot,dm-spl so that it can be accessed in spl
>
> Signed-off-by: Faiz Abbas
> Reviewed-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: PGP signature
On Mon, Oct 23, 2017 at 01:14:57AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
>
> This was late for -rc2 for some reason, but it includes
> what I intended to include in it.
> Some fixes, remove unused CONFIG, DT sync, etc.
> Please pull.
>
>
>
> The following changes since commit 23d51bef94aa
On 10/22/2017 08:53 PM, Jaehoon Chung wrote:
Dear Stephen,
On 10/21/2017 12:47 AM, Stephen Warren wrote:
With the latest content of u-boot-mmc/master, 41dc35a149b3 "drivers: mmc: Avoid
memory leak in case of failure", all Tegra boards (perhaps others too; my system
only tests Tegra) fail to b
On 10/09/2017 02:09 AM, Calvin Johnson wrote:
> Hi,
>
> This patch series introduces U-Boot support for NXP's LS1012A Packet
> Forwarding
> Engine (pfe_eth). LS1012A uses hardware packet forwarding engine to provide
> high performance Ethernet interfaces. The device includes two Ethernet ports.
>
Hi,
On Thu, Oct 12, 2017 at 11:40 PM, Felix Brack wrote:
> On 12.10.2017 14:53, Chen-Yu Tsai wrote:
>> On Thu, Oct 12, 2017 at 8:24 PM, Felix Brack wrote:
>>> On 12.10.2017 04:46, Chen-Yu Tsai wrote:
On Mon, Oct 9, 2017 at 6:04 PM, Felix Brack wrote:
> This patch extends pmic_bind_chil
On 10/23/2017 03:19 AM, Chee, Tien Fong wrote:
> On Jum, 2017-10-20 at 09:39 -0500, Dinh Nguyen wrote:
>>
>> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee
>>>
>>> Enable function visible to other file, so it can be used by other
>>> functions from other fil
+Joe
On Mon, Oct 23, 2017 at 1:12 PM, Frank-Christian Krügel wrote:
> Hi,
>
> is there an U-Boot driver for the Intel i350 Ethernet Chip? Has anybody
> patched the e1000 driver to also work with i350?
>
No, AFAIK.
Regards,
Bin
___
U-Boot mailing list
On 10/19/2017 10:43 AM, Peter Robinson wrote:
> On Thu, Oct 19, 2017 at 9:26 AM, Maxime Ripard
> wrote:
>> The EFI loader support takes around 31kB on an ARMv7 board, which makes us
>> trip across the size limit we've had on the U-Boot binary.
>>
>> Since it's not an essential feature, disable it
On 20.10.2017 15:34, Jaehoon Chung wrote:
> On 10/18/2017 06:39 PM, Felix Brack wrote:
>> This patch extends pmic_bind_children prefix matching. In addition to
>> the node name the property regulator-name is used while trying to match
>> prefixes. This allows assigning different drivers to regulato
Hello:
I've downloaded and compiled U-boot with buildroot for AT91sam9x35ek using
NANDFlash, and managed to get into console (after kernel load) with an
*.ubi RFS; but Im working in a project that has a RFS in jffs2 format(old
project started at 2011, RFS produced by Tool only in that format with
On Thu, 2017-10-19 at 13:20 -0500, Dinh Nguyen wrote:
>
> On 10/19/2017 10:51 AM, Marek Vasut wrote:
> > On 10/19/2017 05:36 PM, Eugeniy Paltsev wrote:
> > > On Tue, 2017-10-17 at 20:32 +0530, Jagan Teki wrote:
> > > > On Tue, Oct 17, 2017 at 8:27 PM, Alexey Brodkin
> > > > wrote:
> > > > > Hi Ja
On Mon, Oct 23, 2017 at 10:50:15AM +0530, Faiz Abbas wrote:
> Hi Tom,
>
> On Monday 23 October 2017 08:30 AM, Tom Rini wrote:
> > On Mon, Oct 23, 2017 at 08:07:09AM +0530, Lokesh Vutla wrote:
> >> On Wednesday 18 October 2017 05:11 PM, Faiz Abbas wrote:
> >>> The dra7xx series of SOCs contain a te
Hi Liam,
> -Original Message-
> From: Liam Beguin [mailto:liambeg...@gmail.com]
> Sent: Saturday, October 21, 2017 11:33 PM
> To: Siva Durga Prasad Paladugu ; Jagan Teki
>
> Cc: u-boot@lists.denx.de; Michal Simek
> Subject: Re: [U-Boot] ZynqMP qspi
>
> Hi Siva,
>
> On 26/09/17 01:28 AM
Hi,
is there an U-Boot driver for the Intel i350 Ethernet Chip? Has anybody
patched the e1000 driver to also work with i350?
Best Regards
Frank-Christian Kruegel
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
This prevents board resets when calling sdp command on boards which have a
watchdog.
Signed-off-by: Vincent Prince
---
drivers/usb/gadget/f_sdp.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index 0fae66b..c3eba6d 100644
--- a/d
This prevents board resets when calling sdp command on boards which have a
watchdog.
Signed-off-by: Vincent Prince
---
drivers/usb/gadget/f_sdp.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index 0fae66b..c3eba6d 100644
--- a/d
From: Patrice Chotard
Add .getcd callback to check is MMC card is present
Signed-off-by: Patrice Chotard
---
drivers/mmc/arm_pl180_mmci.c | 24 ++--
drivers/mmc/arm_pl180_mmci.h | 4
2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/arm_pl180
From: Patrice Chotard
Allow to get "bus-width" property from device tree
Signed-off-by: Patrice Chotard
---
v2: _ remove useless return in bus_width switch case
drivers/mmc/arm_pl180_mmci.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mmc/arm_pl180_mmci.c b/
From: Patrice Chotard
Allow to get and enable MMC related clock
Signed-off-by: Patrice Chotard
---
drivers/mmc/arm_pl180_mmci.c | 16 ++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
index fd57b55..3de6b
From: Patrice Chotard
Update arm_pl180_mmci_init() prototype by adding struct mmc**
param. This is needed before converting this driver to driver model
in order to use arm_pl180_mmci_init() in driver model and in none
driver model implementation
Signed-off-by: Patrice Chotard
---
board/armltd/
From: Patrice Chotard
Convert this driver to driver model.
This driver is also used by VEXPRESS platforms which doesn't
use driver model.
Tested on STM32F746 and STM32F769 platforms.
Signed-off-by: Christophe Priouzeau
Signed-off-by: Patrice Chotard
---
v2: _ add defines for clock min and ma
From: Patrice Chotard
Currently this driver is used by VEXPRESS platform which doesn't support
Driver Model.
ARM_PL180_MMCI IP is embedded on STM32F4 and F7 platforms. In order to add
SD support on these 2 STM32 family SoCs, the following reworks are needed:
_ update arm_pl180_mmci_init(
Hi Jaehoon
On 10/20/2017 03:44 PM, Jaehoon Chung wrote:
> On 10/19/2017 11:46 PM, patrice.chot...@st.com wrote:
>> From: Patrice Chotard
>>
>> Allow to get "bus-width" property from device tree
>>
>> Signed-off-by: Patrice Chotard
>> ---
>> drivers/mmc/arm_pl180_mmci.c | 17 +
>
On Jum, 2017-10-20 at 09:39 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > Enable function visible to other file, so it can be used by other
> > functions from other file.
> Huh? What function? What other file? Why?
>
On Jum, 2017-10-20 at 09:33 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > SoC FPGA info is required in both SPL and U-boot.
> s/SoC FPGA/SocFPGA to be consistent.
>
> s/U-boot/U-Boot
>
Okay.
> >
> >
> > Signed-off-
Hi Jaehoon
On 10/20/2017 03:44 PM, Jaehoon Chung wrote:
> On 10/19/2017 11:45 PM, patrice.chot...@st.com wrote:
>> From: Patrice Chotard
>>
>> Convert this driver to driver model.
>> This driver is also used by VEXPRESS platforms which doesn't
>> use driver model.
>>
>> Tested on STM32F746 and ST
On Jum, 2017-10-20 at 09:29 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > Clock frequency info is required in U-boot.
> We know this patch is for U-Boot, don't need to state it in the
> commit
> message. Also, it's "U-
Mark bandgap node as uboot,dm-spl so that it can be accessed in spl
Signed-off-by: Faiz Abbas
Reviewed-by: Simon Glass
---
v3:
Added Reviewed-by comment.
arch/arm/dts/omap5-u-boot.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/omap5-u-boot.dtsi b/arch/arm/dts/omap5-
Configure thermal configs to remain set by default for dra7xx and am57xx
targets.
Signed-off-by: Faiz Abbas
---
arch/arm/mach-omap2/omap5/Kconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-omap2/omap5/Kconfig
b/arch/arm/mach-omap2/omap5/Kconfig
index 8f58235..8c1730
Adding support for TI bandgap temperature sensor.
Also add dt support for bandgap sensor in spl.
v4:
1. Added configs enabled by default in dra7xx and am57xx SOCs
2. Split config enabling in a separate commit
v3:
Missed adding Reviewed-by in v2.
Faiz Abbas (3):
thermal: ti-bandgap: Add suppo
The dra7xx series of SOCs contain a temperature sensor and an
associated analog-to-digital converter (ADC) which produces
an output which is proportional to the SOC temperature.
Add support for this temperature sensor.
Signed-off-by: Faiz Abbas
Reviewed-by: Simon Glass
---
v3:
Added Reviewed-by
From: Patrice Chotard
Uniformize STMicroelectronics copyrights header
Signed-off-by: Patrice Chotard
---
drivers/tpm/tpm_tis_st33zp24_i2c.c | 3 ++-
drivers/tpm/tpm_tis_st33zp24_spi.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/tpm/tpm_tis_st33zp24_i2c.c
b/
From: Patrice Chotard
Uniformize STMicroelectronics copyrights headers for STM32
related code.
Signed-off-by: Patrice Chotard
---
arch/arm/cpu/armv7/stv0991/pinmux.c | 4 ++--
arch/arm/cpu/armv7m/cache.c | 4 ++--
arch/arm/cpu/armv7m/mpu.c
From: Patrice Chotard
Uniformize STMicroelectronics copyrights headers for SPEAR
related code.
Signed-off-by: Patrice Chotard
---
arch/arm/include/asm/arch-spear/clk.h | 4 ++--
arch/arm/include/asm/arch-spear/hardware.h | 4 ++--
include/configs/x600.h | 4 ++--
3 fil
From: Patrice Chotard
Uniformize STMicroelectronics copyrights headers for STV0991
related code.
Signed-off-by: Patrice Chotard
---
arch/arm/cpu/armv7/stv0991/Makefile| 4 ++--
arch/arm/cpu/armv7/stv0991/clock.c | 4 ++--
arch/arm/cpu/armv7/stv0991/reset.c
From: Patrice Chotard
Uniformize all STMicroelectronics copyrights headers for STi
related code.
Signed-off-by: Patrice Chotard
---
arch/arm/include/asm/arch-stih410/sdhci.h | 3 ++-
arch/arm/include/asm/arch-stih410/sys_proto.h | 4 ++--
board/st/stih410-b2260/Makefile | 4 +
From: Patrice Chotard
This series fixes STMicroelectronics copyright with correct format.
All code related to STI, STM32, SPEAR, STV0991 machine and TMP
driver developped by STMicrolectronics's employee have now an uniform header.
Patrice Chotard (5):
sti: fix STMicroelectronics copyright
s
On Isn, 2017-10-16 at 22:08 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > Add DDR driver suppport for Arria 10.
> s/suppport/support
>
Okay.
> >
> >
> > Signed-off-by: Tien Fong Chee
> > ---
> > arch/arm/mach-socf
Philipp,
On 10/20/2017 05:00 PM, Dr. Philipp Tomsich wrote:
Kever,
On 20 Oct 2017, at 03:59, Kever Yang wrote:
Hi Simon and Philipp.
I would like to include Heiko who is maintainer of upstream kernel
Rockchip SoC for this topic.
For the driver related to grf, which including pinctrl
On Fri, Oct 20, 2017 at 04:33:57PM -0500, Dennis Gilmore wrote:
> El jue, 19-10-2017 a las 16:58 +0200, Maxime Ripard escribió:
> > On Thu, Oct 19, 2017 at 03:42:11PM +0100, Andre Przywara wrote:
> > > Hi,
> > >
> > > On 19/10/17 14:24, Maxime Ripard wrote:
> > > > On Thu, Oct 19, 2017 at 02:03:55
On Jum, 2017-10-13 at 16:08 +0800, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> Add code necessary into the FPGA driver framework in U-Boot
> so it can be used via the 'fpga' command for programing Arria 10
> SoCFPGA.
>
> Signed-off-by: Tien Fong Chee
> ---
> cmd/fpga.c
+Heiko
On Tuesday 17 October 2017 04:14 AM, Jagan Teki wrote:
> Hi,
>
> I'm trying to use SPL_OF_CONTROL with u-boot,dm-spl So I've marked
> u-boot,dm-spl with pinctrl since MMC used the pinconfig.
>
> The issue observed here is SPL handover to U-Boot proper and before
> relocation U-Boot probed
70 matches
Mail list logo
