On Mon, Dec 05, 2016 at 09:43:45PM +0100, Jelle van der Waa wrote:
> On 11/29/16 at 05:25pm, Tom Rini wrote:
> > On Tue, Nov 29, 2016 at 10:17:42PM +0100, Maxime Ripard wrote:
> > > Hi Tom,
> > >
> > > On Tue, Nov 29, 2016 at 04:11:38PM -0500, Tom Rini wrote:
> > > > On Tue, Nov 29, 2016 at 09:39:
Hey simon
On December 8, 2016 11:21:32 PM CET, Simon Glass wrote:
>Hi Oliver,
>
>On 7 December 2016 at 02:26, Olliver Schinagl
>wrote:
>>
>>
>> On December 7, 2016 4:47:23 AM CET, Simon Glass
>wrote:
>>>Hi Oliver,
>>>
>>>On 5 December 2016 at 03:28, Olliver Schinagl
>>>wrote:
Hey Simon,
>
Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller.
Signed-off-by: Masahiro Yamada
---
- This is a counterpart of the Linux driver,
which has been merged in the MMC subsystem:
(commit ff6af28fa in linux-next)
The DT binding for this driver should be referred
in the kernel tr
The most of ethernet drivers are using this mdio registration sequence.
strcpy(priv->bus->name, "emac");
mdio_register(priv->bus);
Where driver can be used only with one MDIO bus because only unique
name should be used.
Other drivers are using unique device name for MDIO registration to
support mu
axi_emac, emaclite and gem have the same issue with registering
multiple instances with mdio busses. mdio bus name has to be uniq but
drivers are setting up only one name for all.
Use mdio_register_seq() and pass dev->seq number to allow multiple
mdio instances registration.
Reported-by: Phani Kir
Hi Tom,
On 8.12.2016 17:04, Tom Rini wrote:
> On Fri, Dec 02, 2016 at 02:55:00PM +0100, Michal Simek wrote:
>
>> Hi Tom,
>>
>> here are some patches I have collected for Xilinx devices, one miiphy
>> patch and SCSI changes I have made.
>>
>> Simon: I have sent v4 of DM_SCSI + ceva sata driver mov
Layerscape Gen2 SoC supports GPIO registers to control GPIO
signals. Adding support of GPIO structure to access GPIO
registers.
Signed-off-by: Pratiyush Srivastava
Signed-off-by: Prabhakar Kushwaha
---
Changes for v2: Incorporated York's comments
- Removed CONFIG_SYS_GPIO1_ADDR as bool
isp-camera image will be broken when enter dual screen display mode.
We set isp qos high to solve this problem.
Signed-off-by: Nickey Yang
---
arch/arm/include/asm/arch-rockchip/qos_rk3288.h | 21 +
board/rockchip/miniarm_rk3288/miniarm-rk3288.c | 21 +
2
Hi Jaehoon,
2016-12-09 8:34 GMT+09:00 Jaehoon Chung :
> On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
>> I wrote a new SDHCI driver for my new SoCs, but before posting it,
>> I just want to make a clean base for my driver entry.
>>
>> Of course, I could enable some needed options in my header fi
Signed-off-by: Christian Riesch
Cc: Manfred Rudigier
Cc: Christoph Rüdisser
---
board/omicron/calimain/MAINTAINERS | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/omicron/calimain/MAINTAINERS
b/board/omicron/calimain/MAINTAINERS
index f6e37a2..ad788a6 100644
--- a
On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
> I wrote a new SDHCI driver for my new SoCs, but before posting it,
> I just want to make a clean base for my driver entry.
>
> Of course, I could enable some needed options in my header file
> (for options in the "white-list"), but I just thought it
On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
> This is a user-unconfigurable option that is selected by the
> drivers that need to overwrite SDHCI IO memory accessors.
> (BCM2835 SDHCI seems the only driver that needs to do so.)
>
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Tom Rini
Revie
On 12/09/2016 08:30 AM, Jaehoon Chung wrote:
> On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
>> Currently, CONFIG_MMC is not related to any other options by
>> "depends on" or "select". One of big advantages of using Kconfig
>> is automatic dependency tracking, but the current state is lacking
>>
On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
> While I moved the options, I also renamed them so that they are all
> prefixed with MMC_SDHCI_.
>
> This commit was created in the following steps.
>
> [1] Rename with the following command
> find . -name .git -prune -o ! -path ./scripts/config_whi
On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
> Currently, CONFIG_MMC is not related to any other options by
> "depends on" or "select". One of big advantages of using Kconfig
> is automatic dependency tracking, but the current state is lacking
> it. As the first step, make the existing MMC driv
On 12/07/2016 10:10 PM, Masahiro Yamada wrote:
> Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI.
> My motivation for the rename is, ultimately, to make all the MMC
> options prefixed with MMC_ and SDHCI options with MMC_SDHCI_,
> like Linux.
>
> This commit was created as follows:
On Thu, Dec 08, 2016 at 04:48:07PM -0600, Andrew F. Davis wrote:
> When TI_SECURE_DEV_PKG is not defined we warn that the file '*_HS' was
> not generated but generate an unsigned one anyway. When TI_SECURE_DEV_PKG
> is exported and the user re-builds, make will detect this file as
> unchangedand a
On 12/08/2016 04:04 PM, Andrew F. Davis wrote:
> When Kconfig options are added, modified, or removed the may this
> may change the 'natural' order of the defconfig files. This order
> is produced with 'make savedefconfig' and tools that automaticaly
> modifiy defconfigs need this order maintained.
Signed-off-by: Andrew F. Davis
---
configs/A10-OLinuXino-Lime_defconfig| 1 +
configs/A10s-OLinuXino-M_defconfig | 1 +
configs/A13-OLinuXinoM_defconfig| 1 +
configs/A13-OLinuXino_defconfig | 1 +
configs/A2
When TI_SECURE_DEV_PKG is not defined we warn that the file '*_HS' was
not generated but generate an unsigned one anyway. When TI_SECURE_DEV_PKG
is exported and the user re-builds, make will detect this file as
unchangedand and so assume it does not need to be re-generated. This
causes it to pack u
Hi Maxime,
On 6 December 2016 at 12:39, Maxime Ripard
wrote:
> On Wed, Nov 23, 2016 at 07:21:07PM -0700, Simon Glass wrote:
>> Hi Maxime,
>>
>> On 22 November 2016 at 05:41, Maxime Ripard
>> wrote:
>> > Hi Simon,
>> >
>> > On Mon, Nov 14, 2016 at 01:44:45PM -0700, Simon Glass wrote:
>> >> Hi Max
Hi,
On 7 December 2016 at 03:03, Kostya Porotchkin wrote:
> Hello, Simon,
>
> Thank you very much for your review.
> Yes, this patch was only adding some help to Kconfig (as you requested), no
> other changes from the previous version.
> I have to re-send the entire series one more time for movi
On 7 December 2016 at 22:22, Joel Stanley wrote:
> Since Binutils 1a9ccd70f9a7[1] u-boot will not link targets that set
> CONFIG_SYS_TEXT_BASE=0 with the following error:
>
> LD u-boot
> arm-linux-gnueabi-ld.bfd: u-boot: Not enough room for program headers, try
> linking with -N
> arm-linu
On 7 December 2016 at 06:25, Vignesh R wrote:
> Add support to handle enable-active-high DT property. This property is
> used to drive the gpio controlling fixed regulator as active high when
> claiming gpio line.
>
> Signed-off-by: Vignesh R
> ---
> doc/device-tree-bindings/regulator/fixed.txt
On 5 December 2016 at 08:43, Andre Przywara wrote:
> Hi,
>
> On 05/12/16 06:25, Simon Glass wrote:
>> Hi Andre,
>>
>> On 4 December 2016 at 18:52, Andre Przywara wrote:
>>> The boot0 hook we have so far is applied _after_ the initial branch
>>> to the "reset" entry point. An upcoming change requi
Hi Nickey,
On 7 December 2016 at 01:16, Nickey Yang wrote:
> isp-camera image will be broken when enter dual screen display mode.
> We set isp qos high to solve this problem.
>
> Signed-off-by: Nickey Yang
> ---
>
> board/rockchip/miniarm_rk3288/miniarm-rk3288.c | 23 +++
>
Hi Oliver,
On 7 December 2016 at 02:26, Olliver Schinagl wrote:
>
>
> On December 7, 2016 4:47:23 AM CET, Simon Glass wrote:
>>Hi Oliver,
>>
>>On 5 December 2016 at 03:28, Olliver Schinagl
>>wrote:
>>> Hey Simon,
>>>
>>>
>>>
>>> On 05-12-16 07:24, Simon Glass wrote:
Hi Oliver,
>>
Hi Otavio,
On 8 December 2016 at 14:03, Otavio Salvador
wrote:
> On Thu, Dec 8, 2016 at 4:55 PM, Simon Glass wrote:
>> Hi Otavio,
>>
>> On 8 December 2016 at 10:39, Otavio Salvador
>> wrote:
>>> Hello everyone,
>>>
>>> We are trying to automate some tests and one of the parts of the
>>> project
When Kconfig options are added, modified, or removed the may this
may change the 'natural' order of the defconfig files. This order
is produced with 'make savedefconfig' and tools that automaticaly
modifiy defconfigs need this order maintained.
This can easily be accomplished by running 'tools/mov
Signed-off-by: Andrew F. Davis
---
configs/sandbox_defconfig | 1 +
configs/sandbox_noblk_defconfig | 1 +
configs/sandbox_spl_defconfig | 1 +
disk/Kconfig| 8
include/configs/sandbox.h | 1 -
5 files changed, 11 insertions(+), 1 deletion(-)
diff --git
Signed-off-by: Andrew F. Davis
---
Kconfig | 2 ++
disk/Kconfig | 11 +++
include/config_defaults.h | 1 -
3 files changed, 13 insertions(+), 1 deletion(-)
create mode 100644 disk/Kconfig
diff --git a/Kconfig b/Kconfig
index a44ac91..de1dcb9 100644
--- a
Signed-off-by: Andrew F. Davis
---
configs/CPCI4052_defconfig | 1 +
configs/M5253DEMO_defconfig | 1 +
configs/M5253EVBE_defconfig | 1 +
configs/MIP405T_defconfig | 1 +
configs/MI
On 12/08/16 16:30, Tom Rini wrote:
> On Thu, Dec 08, 2016 at 12:19:01PM +0200, Jyri Sarha wrote:
>
>> Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2,
>> and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With
>> the default values LCDC suffers from DMA FIFO unde
This is not currently implemented. Add support for this so that the
Chrome OS EC can be used reliably.
Signed-off-by: Moritz Fischer
Cc: Jagan Teki
Cc: Simon Glass
Cc: u-boot@lists.denx.de
---
drivers/spi/zynq_spi.c | 24
1 file changed, 24 insertions(+)
diff --git a/
On 11/16/2016 05:14 PM, Wenbin Song wrote:
> [] ok, I will make this change in the next version of the patch.
>
Wenbin,
Have you sent an update for this set?
York
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-b
On Thu, Dec 8, 2016 at 4:55 PM, Simon Glass wrote:
> Hi Otavio,
>
> On 8 December 2016 at 10:39, Otavio Salvador
> wrote:
>> Hello everyone,
>>
>> We are trying to automate some tests and one of the parts of the
>> project requires the use of persistent environment.
>>
>> Due performance advantag
Hi John,
I have some additional comments beyond Alexey's.
On Wed, Dec 7, 2016 at 11:11 AM, John Haechten
wrote:
> From 127c5fb9ef390cad5cf58e446110a696cf111345 Mon Sep 17 00:00:00 2001
> From: John Haechten
> Date: Wed, 7 Dec 2016 07:51:37 -0800
> Subject: [PATCH] Adding MSCC PHY-VSC8530-VSC853
Hi Otavio,
On 8 December 2016 at 10:39, Otavio Salvador
wrote:
> Hello everyone,
>
> We are trying to automate some tests and one of the parts of the
> project requires the use of persistent environment.
>
> Due performance advantages we would like to use x86 with KVM to
> execute the tests howev
On 12/08/2016 06:10 PM, Patrick Delaunay wrote:
> From: Patrick Delaunay
>
> The "DFU descriptor set" must contain the "DFU functional descriptor"
> but it is missing today in U-Boot code
> (cf: DFU spec 1.1, chapter 4.2 DFU Mode Descriptor Set)
> This patch only allocate buffer and copy DFU func
Hi Alex,
https://patchwork.ozlabs.org/patch/697937/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Stefan,
https://patchwork.ozlabs.org/patch/697749/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi oli...@schinagl.nl,
https://patchwork.ozlabs.org/patch/692378/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi oli...@schinagl.nl,
https://patchwork.ozlabs.org/patch/692377/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi shaohui,
https://patchwork.ozlabs.org/patch/694848/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi oli...@schinagl.nl,
https://patchwork.ozlabs.org/patch/692379/ was applied to u-boot-net.git.
Thanks!
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
From: Patrick Delaunay
The "DFU descriptor set" must contain the "DFU functional descriptor"
but it is missing today in U-Boot code
(cf: DFU spec 1.1, chapter 4.2 DFU Mode Descriptor Set)
This patch only allocate buffer and copy DFU functional descriptor
after interfaces.
Signed-off-by: Patrick
Hi Alexey,
Thanks for the review. I agree with most of your comments, but I'll
note where I don't.
On Thu, Dec 8, 2016 at 6:24 AM, Alexey Brodkin
wrote:
...
>> +static int mscc_vsc8531_vsc8541_init_scripts(struct phy_device *phydev)
>> +{
>> + u16 reg_val17;
>> + u16 reg_val18;
>
> Any
Hi Tom,
The following changes since commit 388019f1e2166638453bc4e0cc5d138c2a19e0c9:
Merge branch 'master' of git://git.denx.de/u-boot-usb (2016-12-06 08:07:20
-0500)
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
for you to fetch changes up to bb135a0180
On Fri, Dec 02, 2016 at 02:55:00PM +0100, Michal Simek wrote:
> Hi Tom,
>
> here are some patches I have collected for Xilinx devices, one miiphy
> patch and SCSI changes I have made.
>
> Simon: I have sent v4 of DM_SCSI + ceva sata driver moved to DM which
> should go through your tree because
On Thu, Dec 08, 2016 at 05:37:52PM +0200, Uri Mashiach wrote:
> From: Dmitry Lifshitz
>
> Features supported :
>
> * Serial console
> * SPI Flash
> * MMC/SD Card
> * eMMC storage
> * SATA
> * PCA9555 - GPIO expander over I2C5 bus
> * USB
>
> Use spl alternate boot device feature to define fall
Hello everyone,
We are trying to automate some tests and one of the parts of the
project requires the use of persistent environment.
Due performance advantages we would like to use x86 with KVM to
execute the tests however after booting QEMU with the UEFI payload it
turns out the environment cann
From: Dmitry Lifshitz
Add MAC support.
Use PHY, connected to RGMII1 as a default Eth adapter,
by appropriate setting of 'cpsw_data.active_slave'.
'cpsw_phy' env variable can override this setting.
Set the MAC addresses in the U-Boot environment.
The addresses are retrieved from the on-board EE
From: Dmitry Lifshitz
Features supported :
* Serial console
* SPI Flash
* MMC/SD Card
* eMMC storage
* SATA
* PCA9555 - GPIO expander over I2C5 bus
* USB
Use spl alternate boot device feature to define fallback to
the main boot device as it is defined by hardware.
Signed-off-by: Dmitry Lifshit
From: Dmitry Lifshitz
Add PCB revision message.
Implement board revision get_board_rev API.
Signed-off-by: Dmitry Lifshitz
Commit description update.
Signed-off-by: Uri Mashiach
Acked-by: Igor Grinberg
Reviewed-by: Tom Rini
---
board/compulab/cl-som-am57x/cl-som-am57x.c | 14 ++
This patch series adds support for CompuLab CL-SOM-AM57X board and the
SBC-AM57X evaluation kit.
CL-SOM-AM57x is a miniature System-on-Module (SoM) based on
TI Sitara AM57x ARM Cortex-A15 System-on-Chip family.
SBC-AM57x is a single board computer, implemented with the
CL-SOM-AM57x computer-on-mo
Modify U-Boot default env settings.
Boot sequence:
1. SD card boot script
2. SD card boot no script
3. SATA boot script
4. SATA boot no script
5. eMMC boot script
6. eMMC boot no script
Signed-off-by: Uri Mashiach
Acked-by: Igor Grinberg
Reviewed-by: Tom Rini
---
include/configs/cl-som-am57x.
Hello lsunkara,
Am 08.12.2016 um 06:37 schrieb lsunkara:
Hi,
Am trying to validate I2C peripheral on xilinx zynq zc702 evaluation
board in u-boot. When am trying to run the command like i2c probe and i2c
write am facing the issue like i2c commands are not known. Please can
someone tell me
On Thu, Dec 08, 2016 at 11:58:22AM +0800, Hongbo Zhang wrote:
> This patch adds secure_text, secure_data and secure_stack sections for ARMv8
> to
> hold PSCI text and data, and it is based on the legacy implementation of
> ARMv7.
>
> ARMV8_SECURE_BASE defines the address for PSCI secure section
On Thu, Dec 08, 2016 at 11:58:21AM +0800, Hongbo Zhang wrote:
> NXP/Freescale uses macro CONFIG_ARMV8_PSCI to enable their private PSCI
> implementation in PPA firmware, but this macro naming too generic, so this
> patch replaces it with a specic one CONFIG_FSL_PPA_ARMV8_PSCI.
> And this macro CON
On Tue, Dec 06, 2016 at 05:53:10AM +0100, Marek Vasut wrote:
> The following changes since commit 3cfb67d0419c645998b440592d8c2ce010134b8e:
>
> Prepare v2017.01-rc1 (2016-12-05 18:36:23 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-socfpga.git master
>
> f
On Tue, Dec 06, 2016 at 05:54:19AM +0100, Marek Vasut wrote:
> The following changes since commit 3cfb67d0419c645998b440592d8c2ce010134b8e:
>
> Prepare v2017.01-rc1 (2016-12-05 18:36:23 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-usb.git master
>
> for y
On Wed, Dec 07, 2016 at 10:10:29PM +0900, Masahiro Yamada wrote:
> While I moved the options, I also renamed them so that they are all
> prefixed with MMC_SDHCI_.
>
> This commit was created in the following steps.
>
> [1] Rename with the following command
> find . -name .git -prune -o ! -path .
On Thu, Dec 08, 2016 at 12:19:01PM +0200, Jyri Sarha wrote:
> Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2,
> and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With
> the default values LCDC suffers from DMA FIFO underflows and frame
> synchronization lost er
Hi,
Do you have any comments on this series?
> -Original Message-
> From: Wenyou Yang [mailto:wenyou.y...@atmel.com]
> Sent: 2016年10月31日 13:20
> To: U-Boot Mailing List
> Cc: Stephen Warren ; andreas.de...@googlemail.com;
> Simon Glass ; Heiko Schocher ; Wenyou
> Yang - A41535 ; Wenyou Y
Layerscape Gen2 SoC supports GPIO registers to control GPIO
signals. Adding support of GPIO structure to access GPIO
registers.t rebase --continue
Signed-off-by: Pratiyush Srivastava
Signed-off-by: Prabhakar Kushwaha
---
Changes for v2: Incorporated York's comments
- Removed CONFIG_SYS_G
On Thu, Dec 8, 2016 at 4:05 AM, brendan wrote:
> I am new to this and was wondering if anyone could shed any light on what I
> need to look at or how I can somehow implement the Boot Count Limit
> functionality or similar.
...
You need to choose the backend for use. The i.MX has few persistent
re
Hi John,
First of all I'm wondering if there was a real need to add that many people in
Cc?
Normally sybsystem maintainer and active contributors to code you modified are
good options here.
Then have you run your patch through checkpatch?
Obviously it was not the case because it says me:
---
Hi,
Am trying to validate I2C peripheral on xilinx zynq zc702 evaluation
board in u-boot. When am trying to run the command like i2c probe and i2c
write am facing the issue like i2c commands are not known. Please can
someone tell me how to enable these commands to use it in u-boot
--
View t
Dear sir or madam,
We are using an Altera cyclone V SoC FPGA and have a problem on warm reset in
the U-Boot environment. I would be very grateful if you could send this e-mail
to a responsible person.
It is possible to answer in English or German.
Kind regards,
Marcel Oehen
Siemens Schweiz AG
Hello,
I have a VAR-SOM-MX6 with the following details:
Board: Variscite VAR_SOM_MX6 SOM-Solo
SOC_FAMILY = "mx6:mx6q:mx6dl"
PREFERRED_PROVIDER_virtual/kernel_var-som-mx6 ?= "linux-variscite"
PREFERRED_VERSION_linux-imx_mx6 = "4.1.15"
and the following u-boot details:
U-Boot SPL 2013.10-00027-g5
On Thu, Dec 08, 2016 at 02:22:51PM +1100, Joel Stanley wrote:
> error, we are technically creating invalid ELF files without this
> option.
I don't think you were creating invalid ELF files, just unusual ones.
Anyway, passing --no-dynamic-linker is a good idea. That tells ld
that the PIE or shar
From: Konstantin Porotchkin
Enable mvebu pin control support in the default configuration
files for Armada-7040 and Armada-8040 development boards
Signed-off-by: Konstantin Porotchkin
Cc: Stefan Roese
Cc: Nadav Haklai
Cc: Neta Zur Hershkovits
Cc: Omri Itach
Cc: Igal Liberman
Cc: Haim Boot
From: Konstantin Porotchkin
Enable mvebu "bubt" command support in the default configuration
file for Armada-7040 and Armada-8040 development boards
Signed-off-by: Konstantin Porotchkin
Cc: Stefan Roese
Cc: Nadav Haklai
Cc: Neta Zur Hershkovits
Cc: Omri Itach
Cc: Igal Liberman
Cc: Haim Boo
From: Konstantin Porotchkin
This set of patches is adding more features for bards based on new
Marvell MoChi platforms - Armada-70x0 and Armada-80x0.
The patches were applied on top of Stefan's mvebu-related patch set v2
with the last patch named
"dm: core: Add dev_get_addr_size_index() to retri
From: Konstantin Porotchkin
Add pin control nodes to APN806, CP-master, CP-slave and
Armada-7040 and Armada-8040 boards DTS files
Signed-off-by: Konstantin Porotchkin
Cc: Stefan Roese
Cc: Nadav Haklai
Cc: Neta Zur Hershkovits
Cc: Omri Itach
Cc: Igal Liberman
Cc: Haim Boot
Cc: Hanna Hawa
From: Konstantin Porotchkin
Add a DM port of Marvell pin control driver.
The A8K SoC family contains several silicone dies interconnected
in a single package. Every die is normally equipped with its own
pin controller unit.
There are 2 pin controllers in A70x0 SoC and 3 in A80x0 SoC.
Signed-off-
From: Konstantin Porotchkin
Add support for mvebu bubt command for flash image
load, check and burn on boot device.
Signed-off-by: Konstantin Porotchkin
Reviewed-by: Stefan Roese
Cc: Stefan Roese
Cc: Nadav Haklai
Cc: Neta Zur Hershkovits
Cc: Omri Itach
Cc: Igal Liberman
Cc: Haim Boot
Cc:
From: Konstantin Porotchkin
Align the Armada-8040-db and Armada-7040-db SPI and I2C
DTS settings with latest DB settings:
- 8040-db: disable i2c0 and spi0 on AP (MPPs are reserved for SDIO)
- 8040-db: disable cps_i2c0 on CP1
- 8040-db: enable spi1 on CP1 (the new location of the boot flash)
The
Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2,
and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With
the default values LCDC suffers from DMA FIFO underflows and frame
synchronization lost errors. The initialization values are the highest
that work flawlessly
On Wed, 2016-12-07 at 16:08 +0100, Markus Valentin wrote:
> Hi,
>
> did somebody already did some effort to support the intel 82579
> Gigabit
> Ethernet PHY with the e1000 driver?
I have not tried 82579 in particular but back when I brought up our
i210/i211 based modules I do remember that one at
80 matches
Mail list logo
