Layerscape Gen2 SoC supports GPIO registers to control GPIO
signals. Adding support of GPIO structure to access GPIO
registers.t rebase --continue
Signed-off-by: Pratiyush Srivastava <pratiyush.srivast...@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
---
Changes for v2: Incorporated York's comments
- Removed CONFIG_SYS_GPIO1_ADDR as bool
- Renamed CONFIG_SYS_GPIO1_ADDR
This structure is required while supporting ethernent in LS1012AFRDM.
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index d684a07..f58be96 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -52,6 +52,11 @@
#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR +
0x00550000)
#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR +
0x01100000)
+#define GPIO1_BASE_ADDR (CONFIG_SYS_IMMR +
0x300000)
+#define GPIO2_BASE_ADDR (CONFIG_SYS_IMMR +
0x310000)
+#define GPIO3_BASE_ADDR (CONFIG_SYS_IMMR +
0x320000)
+#define GPIO4_BASE_ADDR (CONFIG_SYS_IMMR +
0x330000)
+
#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
@@ -588,6 +593,16 @@ struct ccsr_cci400 {
u8 res_e004[0x10000 - 0xe004];
};
+struct ccsr_gpio {
+ u32 gpdir;
+ u32 gpodr;
+ u32 gpdat;
+ u32 gpier;
+ u32 gpimr;
+ u32 gpicr;
+ u32 gpibe;
+};
+
/* MMU 500 */
#define SMMU_SCR0 (SMMU_BASE + 0x0)
#define SMMU_SCR1 (SMMU_BASE + 0x4)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
