This patch introduces CONFIG_RTL8211X_PHY_FORCE_MASTER. If this
define is set, RTL8211x PHYs will have their 1000BASE-T
master/slave autonegotiation disabled and forced to master mode.
This is helpful for PHYs like the RTL8211C which produce unstable links
in slave mode. Such problems have been fo
This change mainly serves as a way to document the define.
Signed-off-by: Michael Haas
---
Changes in v3: None
Changes in v2: None
drivers/net/Kconfig | 17 +
1 file changed, 17 insertions(+)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2a229b8..b102bc6 100644
Force master mode for 1000BASE-T operation on the
A20-Olimex-SOM-EVB.
Karsten Merker reports that this change is necessary to get a reliable
link at gigabit speeds.
Signed-off-by: Michael Haas
---
Changes in v3: None
Changes in v2: None
configs/A20-Olimex-SOM-EVB_defconfig | 1 +
1 file chang
Force master mode on the A20-OLinuXino-Lime2. This change is required
to get a reliable link at gigabit speeds.
Signed-off-by: Michael Haas
---
Changes in v3: None
Changes in v2: None
configs/A20-OLinuXino-Lime2_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/A20-OLinuXin
This patch is required to get reliable 1000BASE-T operation on some
boards using the RTL8211C(L) PHY.
Following discussions on v2 of this patch, I have removed the incorrect
check for the RTL8211C(L). Affected boards now have to define
CONFIG_RTL8211X_PHY_FORCE_MASTER to benefit from the fix.
No
On Thursday 24 March 2016 12:13 AM, Semen Protsenko wrote:
>
> Hi All,
>
> This series reverts recently added patches that break fastboot command.
> I propose to keep it this way until issue is found and fixed.
Let's get this fixed instead of reverting any of the patches :). This
is because D
dma_addr_t holds any valid DMA address. If the DMA API only uses 32-bit
addresses, dma_addr_t need only be 32 bits wide. Bus addresses, e.g., PCI BARs,
may be wider than 32 bits, but drivers do memory-mapped I/O to ioremapped
kernel virtual addresses, so they don't care about the size of the actua
Signed-off-by: Stephen Warren
---
This series depends on:
* My series beginning with "ARM: bcm283x: don't always define
CONFIG_BCM2835"
* My patch "serial: add BCM283x mini UART driver".
* Alexander Graf's arm64 page table/cache series starting with
"arm64: Add 32bit arm compatible dcache def
revents
MMC from operating correctly on any Pi. As of 20160323 that is not fixed.
Signed-off-by: Stephen Warren
---
arch/arm/mach-bcm283x/Kconfig | 21 +
board/raspberrypi/rpi/rpi.c | 16 +++-
board/raspberrypi/rpi_3_32b/MAINTAINERS | 6
loading the pi3-miniuart-bt DT overlay. As of
20160323 (or firmware.git commit 7f536a27cc74 "kernel: lirc_rpi: Lower IR
reception error to debug See: https://github.com/raspberrypi/linux/pull/1361";
this doesn't seem to work; I assume this is due to a firmware bug.
Signed-off-by:
To simplify support for new SoCs, just use a constant filename
for the unknown case. In practice this case shouldn't be hit anyway, so
the filename isn't relevant, and certainly doesn't need to differentiate
between SoCs. If a user has an as-yet-unknown board, they can override
this value in the en
This adds an explanation of which Raspberry Pi models each target option
supports.
Signed-off-by: Stephen Warren
---
arch/arm/mach-bcm283x/Kconfig | 19 ++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
On Wednesday 23 March 2016 08:44 PM, Nishanth Menon wrote:
> Add missing Privilege ID settings for KS2 SoCs.
>
> Based on:
> K2H/K: Table 6-7. Privilege ID Settings from SPRS866E (Nov 2013)
> http://www.ti.com/lit/ds/symlink/66ak2h14.pdf (page 99)
> K2L: Table 7-7. Privilege ID Settings from S
On Wednesday 23 March 2016 08:44 PM, Nishanth Menon wrote:
> MSMC segment Privilege ID is not consistent accross the keystone2 SoCs.
> As the first step to ensure complete SoC wide coherency setup, lets
> refactor the macros to remove the #if-deffery around the code which
> obfuscates which IDs a
On Thu, 24 Mar 2016, Marek Vasut wrote:
On 03/24/2016 12:54 AM, Sergey Kubushyn wrote:
On Thu, 24 Mar 2016, Marek Vasut wrote:
On 03/24/2016 12:47 AM, Sergey Kubushyn wrote:
On Thu, 24 Mar 2016, Marek Vasut wrote:
On 03/24/2016 12:08 AM, Tom Rini wrote:
On Wed, Mar 23, 2016 at 04:02:07PM
On 03/23/2016 06:27 PM, Alexander Graf wrote:
The bcm2835 frame buffer is in RAM, so we can easily map it as cached and gain
all the glorious performance boost that brings with it.
Tested-by: Stephen Warren
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
@@ -44,6 +44,7 @@ v
When switching between EFI context and U-Boot context we need to swap
the register that "gd" resides in.
Some functions slipped through here, with efi_allocate_pool / efi_free_pool
not doing the switch correctly and efi_return_handle switching too often.
Fix them all up to make sure we always hav
On 03/24/2016 01:13 AM, Tom Rini wrote:
> On Thu, Mar 24, 2016 at 12:49:54AM +0100, Marek Vasut wrote:
>> On 03/24/2016 12:47 AM, Sergey Kubushyn wrote:
>>> On Thu, 24 Mar 2016, Marek Vasut wrote:
>>>
On 03/24/2016 12:08 AM, Tom Rini wrote:
> On Wed, Mar 23, 2016 at 04:02:07PM -0700, Serge
The bcm2835 frame buffer is in RAM, so we can easily map it as cached and gain
all the glorious performance boost that brings with it.
Signed-off-by: Alexander Graf
---
v2 -> v3:
- Fix align parameters
- Fix whitespace
v3 -> v4:
- Align start of fb as well to align with segments
- Al
On Wed, Mar 23, 2016 at 8:57 PM, Marek Vasut wrote:
> Enable FIT image support, EXT4 support and generic FS support.
>
> Signed-off-by: Marek Vasut
> Cc: Stefano Babic
> Cc: Fabio Estevam
Reviewed-by: Fabio Estevam
___
U-Boot mailing list
U-Boot@lis
On Thu, Mar 24, 2016 at 12:49:54AM +0100, Marek Vasut wrote:
> On 03/24/2016 12:47 AM, Sergey Kubushyn wrote:
> > On Thu, 24 Mar 2016, Marek Vasut wrote:
> >
> >> On 03/24/2016 12:08 AM, Tom Rini wrote:
> >>> On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
> On Wed, 23 Mar 20
On 03/24/2016 12:54 AM, Sergey Kubushyn wrote:
> On Thu, 24 Mar 2016, Marek Vasut wrote:
>
>> On 03/24/2016 12:47 AM, Sergey Kubushyn wrote:
>>> On Thu, 24 Mar 2016, Marek Vasut wrote:
>>>
On 03/24/2016 12:08 AM, Tom Rini wrote:
> On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn
Import __do_div64 from Linux 4.4.6 , commit
0d1912303e54ed1b2a371be0bba51c384dd57326
on arm32. This function is for some toolchains, which generate _udivmoddi4()
for 64 bit division.
Since we do not support stack unwinding, instead of importing the whole
asm/unwind.h and all the baggage, this pat
Enable FIT image support, EXT4 support and generic FS support.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
Cc: Fabio Estevam
---
configs/mx28evk_defconfig | 1 +
include/configs/mx28evk.h | 3 +++
2 files changed, 4 insertions(+)
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defco
On Thu, 24 Mar 2016, Marek Vasut wrote:
On 03/24/2016 12:47 AM, Sergey Kubushyn wrote:
On Thu, 24 Mar 2016, Marek Vasut wrote:
On 03/24/2016 12:08 AM, Tom Rini wrote:
On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
On Wed, 23 Mar 2016, Tom Rini wrote:
On Wed, Mar 23, 2016
On 03/24/2016 12:47 AM, Sergey Kubushyn wrote:
> On Thu, 24 Mar 2016, Marek Vasut wrote:
>
>> On 03/24/2016 12:08 AM, Tom Rini wrote:
>>> On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
On Wed, 23 Mar 2016, Tom Rini wrote:
> On Wed, Mar 23, 2016 at 06:08:45PM +0100,
On Thu, 24 Mar 2016, Marek Vasut wrote:
On 03/24/2016 12:08 AM, Tom Rini wrote:
On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
On Wed, 23 Mar 2016, Tom Rini wrote:
On Wed, Mar 23, 2016 at 06:08:45PM +0100, Albert ARIBAUD wrote:
Hello Tom,
On Wed, 23 Mar 2016 09:22:38 -040
On Wed, 23 Mar 2016, Tom Rini wrote:
On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
On Wed, 23 Mar 2016, Tom Rini wrote:
On Wed, Mar 23, 2016 at 06:08:45PM +0100, Albert ARIBAUD wrote:
Hello Tom,
On Wed, 23 Mar 2016 09:22:38 -0400, Tom Rini wrote:
On Wed, Mar 23, 2016 at
On 03/24/2016 12:08 AM, Tom Rini wrote:
> On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
>> On Wed, 23 Mar 2016, Tom Rini wrote:
>>
>>> On Wed, Mar 23, 2016 at 06:08:45PM +0100, Albert ARIBAUD wrote:
Hello Tom,
On Wed, 23 Mar 2016 09:22:38 -0400, Tom Rini wrote:
>>
On Wed, Mar 23, 2016 at 04:02:07PM -0700, Sergey Kubushyn wrote:
> On Wed, 23 Mar 2016, Tom Rini wrote:
>
> >On Wed, Mar 23, 2016 at 06:08:45PM +0100, Albert ARIBAUD wrote:
> >>Hello Tom,
> >>
> >>On Wed, 23 Mar 2016 09:22:38 -0400, Tom Rini wrote:
> >>>On Wed, Mar 23, 2016 at 01:53:35PM +0100, A
On Wed, 23 Mar 2016, Tom Rini wrote:
On Wed, Mar 23, 2016 at 06:08:45PM +0100, Albert ARIBAUD wrote:
Hello Tom,
On Wed, 23 Mar 2016 09:22:38 -0400, Tom Rini wrote:
On Wed, Mar 23, 2016 at 01:53:35PM +0100, Albert ARIBAUD wrote:
Hello Marek,
On Sun, 20 Mar 2016 17:15:34 +0100, Marek Vasut
On Wed, Mar 9, 2016 at 12:46 PM, Maxime Ripard
wrote:
> On Tue, Feb 09, 2016 at 11:19:10AM -0800, Steve Rae wrote:
>> When 7bfc3b1 (sparse: Refactor chunk parsing function) was implemented,
>> it dropped 9981945 (aboot: fix block addressing for don't care chunk type).
>>
>> This re-implements the
On Wed, Mar 9, 2016 at 12:47 PM, Maxime Ripard
wrote:
> On Tue, Feb 09, 2016 at 11:19:11AM -0800, Steve Rae wrote:
>> remove logging of the 'skipped' blocks
>>
>> Signed-off-by: Steve Rae
>
> Acked-by: Maxime Ripard
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Ke
Hi Tom,
Here is the first sunxi pull-req for v2016.05, it
contains:
-A sync of the sunxi dts files with the kernel
-Addition of support for 10 new boards
-Various fixes
The following changes since commit 0764f24ae6bc937e358990c357f7452b4d5351e3:
net: Move CONFIG_RTL8169 to Kconfig (2016-03-2
On Thu, Mar 24, 2016 at 01:56:11AM +0900, Masahiro Yamada wrote:
> Hi Tom,
>
>
> Here is a series of UniPhier SoCs updates for v2016.5-rc1.
> It includes ARM64 compiler warning fixes, cleanups, new SoC/board DTS,
> and misc changes.
>
>
>
> The following changes since commit 0764f24ae6bc937e3
On Wed, Mar 23, 2016 at 06:08:45PM +0100, Albert ARIBAUD wrote:
> Hello Tom,
>
> On Wed, 23 Mar 2016 09:22:38 -0400, Tom Rini wrote:
> > On Wed, Mar 23, 2016 at 01:53:35PM +0100, Albert ARIBAUD wrote:
> > > Hello Marek,
> > >
> > > On Sun, 20 Mar 2016 17:15:34 +0100, Marek Vasut wrote:
> > > >
Hello Tom,
On Wed, 23 Mar 2016 09:22:38 -0400, Tom Rini wrote:
> On Wed, Mar 23, 2016 at 01:53:35PM +0100, Albert ARIBAUD wrote:
> > Hello Marek,
> >
> > On Sun, 20 Mar 2016 17:15:34 +0100, Marek Vasut wrote:
> > > This patch decouples U-Boot binary from the toolchain on systems where
> > > pri
Not long ago, a change was made in U-Boot to switch the primary SoC from
LS2085A to LS2080A. SoC name and board names were changed. It turns out
the same board support both SoCs with a socket. It is possible to swtich
SoC. In this case, using one unified image is more appropriate. If future
SoC can
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.
Signe
Hi,
On 23-03-16 18:54, vishnupatekar wrote:
In mctl_channel_init, (0x50<<26) which overflows 32bit.
It was supposed to be 0x50<<16,corrected now.
Reported-by: Hans de Goede
Signed-off-by: Vishnu Patekar
Thanks, applied.
Regards,
Hans
---
arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c | 2
On Wed, Mar 23, 2016 at 12:40 PM, Sam Protsenko
wrote:
> On Wed, Mar 23, 2016 at 7:40 PM, Steve Rae wrote:
>> Lukasz & Sam:
>>
>> On Wed, Mar 23, 2016 at 8:54 AM, Sam Protsenko
>> wrote:
>>>
>>> On Wed, Mar 23, 2016 at 11:49 AM, Lukasz Majewski
>>> wrote:
>>> > Hi Marek,
>>> >
>>> >> On 03/23/2
On Wed, Mar 23, 2016 at 7:40 PM, Steve Rae wrote:
> Lukasz & Sam:
>
> On Wed, Mar 23, 2016 at 8:54 AM, Sam Protsenko
> wrote:
>>
>> On Wed, Mar 23, 2016 at 11:49 AM, Lukasz Majewski
>> wrote:
>> > Hi Marek,
>> >
>> >> On 03/23/2016 01:50 AM, Steve Rae wrote:
>> >> > This reverts commit 9e4b510d4
From: Sam Protsenko
This reverts commit c4a2736ca165167aa38228a60354c6a8950d42f8.
---
board/ti/dra7xx/evm.c | 83 ++-
1 file changed, 3 insertions(+), 80 deletions(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 4e45abf..eb19a6
From: Sam Protsenko
This reverts commit d468b1781abe3975fdbc1695ef1fcfb48b01732b.
---
board/ti/dra7xx/evm.c | 14 --
1 file changed, 14 deletions(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index eb19a6d..4f60837 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dr
From: Sam Protsenko
This reverts commit 212425b2721bb67273963b7fc517455425948d90.
---
include/configs/dra7xx_evm.h | 5 -
1 file changed, 5 deletions(-)
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index c0795ab..6e3a482 100644
--- a/include/configs/dra7xx_evm.h
Hi All,
This series reverts recently added patches that break fastboot command.
I propose to keep it this way until issue is found and fixed.
When I'm trying to run fastboot command, next error occurs:
=> fas 0
data abort
pc : [] lr : [<0020>]
reloc pc : [<8081f25e>
In mctl_channel_init, (0x50<<26) which overflows 32bit.
It was supposed to be 0x50<<16,corrected now.
Reported-by: Hans de Goede
Signed-off-by: Vishnu Patekar
---
arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/su
Hi Stephen,
On 03/23/2016 10:27 AM, Stephen Warren wrote:
> On 03/20/2016 07:45 PM, Eric Nelson wrote:
>
>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>
>> @@ -6,7 +6,6 @@
>>*
>>* SPDX-License-Identifier:GPL-2.0+
>>*/
>> -
>> #include
>
> Unrelated change?
>
Yes. So
On 03/23/2016 10:24 AM, Stephen Warren wrote:
> On 03/20/2016 07:45 PM, Eric Nelson wrote:
>> Allow the selection of CONFIG_BLOCK_CACHE, CONFIG_CMD_BLOCK_CACHE
>> using menuconfig.
>
> I think this should be part of patch 1.
Works for me, especially as it adds some documentation in
the form of he
Hi Stephen,
Thanks again for the detailed review.
On 03/23/2016 10:22 AM, Stephen Warren wrote:
> On 03/20/2016 07:45 PM, Eric Nelson wrote:
>> Add a block device cache to speed up repeated reads of block devices by
>> various filesystems.
>>
>> This small amount of cache can dramatically speed u
Lukasz & Sam:
On Wed, Mar 23, 2016 at 8:54 AM, Sam Protsenko
wrote:
>
> On Wed, Mar 23, 2016 at 11:49 AM, Lukasz Majewski
> wrote:
> > Hi Marek,
> >
> >> On 03/23/2016 01:50 AM, Steve Rae wrote:
> >> > This reverts commit 9e4b510d40310bf46e09f4edd0a0b6356213df47.
> >> >
> >> > Signed-off-by: Ste
On 03/20/2016 07:45 PM, Eric Nelson wrote:
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
@@ -6,7 +6,6 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
-
#include
Unrelated change?
I don't see any cache invalidation call when the SD device is
re-initialized.
I think I menti
On 03/20/2016 07:45 PM, Eric Nelson wrote:
Allow the selection of CONFIG_BLOCK_CACHE, CONFIG_CMD_BLOCK_CACHE
using menuconfig.
I think this should be part of patch 1.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u
On 03/20/2016 07:45 PM, Eric Nelson wrote:
Add a block device cache to speed up repeated reads of block devices by
various filesystems.
This small amount of cache can dramatically speed up filesystem
operations by skipping repeated reads of common areas of a block
device (typically directory str
Hi Tom,
Here is a series of UniPhier SoCs updates for v2016.5-rc1.
It includes ARM64 compiler warning fixes, cleanups, new SoC/board DTS,
and misc changes.
The following changes since commit 0764f24ae6bc937e358990c357f7452b4d5351e3:
net: Move CONFIG_RTL8169 to Kconfig (2016-03-22 12:19:53 -
2016-03-23 1:40 GMT+09:00 Masahiro Yamada :
>
>
>
> Masahiro Yamada (3):
> ARM: uniphier: fix README instruction for updating U-Boot via TFTP
> ARM: uniphier: add NOR boot support
> ARM: uniphier: switch to raw U-Boot image
Series, Applied to u-boot-uniphier/master.
--
Best Regards
Masah
2016-03-18 16:41 GMT+09:00 Masahiro Yamada :
>
>
>
> Masahiro Yamada (13):
> ARM: dts: uniphier: add device tree for Micro Support Card
> ARM: uniphier: remove commented out define
> ARM: uniphier: fix bogus comment
> ARM: uniphier: drop PH1- prefix from CONFIG options and file names
> AR
2016-02-29 20:57 GMT+09:00 Masahiro Yamada :
> The 64-bit compiler (ex. aarch64) emits "warning: cast from pointer
> to integer of different size".
>
> Make it work with 64bit DMA address while I am here.
>
> Signed-off-by: Masahiro Yamada
Applied to u-boot-uniphier/master.
--
Best Regards
Ma
2016-03-16 12:10 GMT+09:00 Masahiro Yamada :
> The function spl_parse_image_header() falls back to a raw image
> if the U-Boot header is missing and CONFIG_SPL_PANIC_ON_RAW_IMAGE
> is undefined. While, mmc_load_image_raw_sector() only accepts a
> U-Boot legacy image or an FIT image, preventing us
Valentin,
Your understand is correct. Please see my answers below to your questions.
On 03/23/2016 12:46 AM, Valentin Longchamp wrote:
> Hello,
>
> We are currently designing a board based on the T1040 CPU from Freescale/NXP.
> I
> am preparing its u-boot support and bring-up tools (JTAG) as we
On Tue, Mar 22, 2016 at 11:28 PM, Stephen Warren wrote:
> smsc95xx_read_reg() should calculate sizeof(*data) not sizeof(data) since
> data is a pointer, and the value pointed at is being transferred over USB,
> not the value of the pointer. This fixes operation of the driver in 64-bit
> builds, su
On Wed, Mar 23, 2016 at 11:49 AM, Lukasz Majewski
wrote:
> Hi Marek,
>
>> On 03/23/2016 01:50 AM, Steve Rae wrote:
>> > This reverts commit 9e4b510d40310bf46e09f4edd0a0b6356213df47.
>> >
>> > Signed-off-by: Steve Rae
>> > ---
>> > As discussed on the mailing list, this change breaks the download
From: Fabio Estevam
It is clearer to specify the full path to access the
doc/README.displaying-bmps file.
Signed-off-by: Fabio Estevam
---
README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/README b/README
index 523941f..1fb8f88 100644
--- a/README
+++ b/README
@@ -190
Hi Chin,
On 23.03.2016 16:00, Chin Liang See wrote:
On Mon, 2016-03-21 at 23:45 +0800, Chin Liang See wrote:
On Mon, 2016-03-21 at 22:05 +0800, Chin Liang See wrote:
On Fri, 2016-03-04 at 20:03 +0100, Marek Vasut wrote:
On 03/04/2016 05:06 PM, Dinh Nguyen wrote:
On 03/02/2016 05:24 PM, Marek
On 03/23/2016 01:12 AM, Yao Yuan wrote:
> On 03/23/2016 03:09 AM, York Sun wrote:
>> On 03/06/2016 11:56 PM, Yuan Yao wrote:
>>> From: Yuan Yao
>>>
>>> This series add support for QSPI boot on LS2080AQDS.
>>>
>>> Yuan Yao (11):
>>> armv8: ls2080aqds: Select QSPI CLK div via SCFG
>>> configs: l
MSMC segment Privilege ID is not consistent accross the keystone2 SoCs.
As the first step to ensure complete SoC wide coherency setup, lets
refactor the macros to remove the #if-deffery around the code which
obfuscates which IDs are actually enabled for which SoC.
As a result of this change the PC
Add missing Privilege ID settings for KS2 SoCs.
Based on:
K2H/K: Table 6-7. Privilege ID Settings from SPRS866E (Nov 2013)
http://www.ti.com/lit/ds/symlink/66ak2h14.pdf (page 99)
K2L: Table 7-7. Privilege ID Settings from SPRS930 (April 2015)
http://www.ti.com/lit/ds/symlink/66ak2l06.pdf (page
Looks like Keystone2 platform may have quite a few missing
configurations for various SoC variants. We need mark each of these
id as shared in corresponding registers as well, without doing this,
drivers fail inexplicably since the drivers seem to expect SoC wide
coherency capability - which needs
On Mon, 2016-03-21 at 23:45 +0800, Chin Liang See wrote:
> On Mon, 2016-03-21 at 22:05 +0800, Chin Liang See wrote:
> > On Fri, 2016-03-04 at 20:03 +0100, Marek Vasut wrote:
> > > On 03/04/2016 05:06 PM, Dinh Nguyen wrote:
> > > > On 03/02/2016 05:24 PM, Marek Vasut wrote:
[..]
> > > > > Well, th
Hi Jagan,
please excuse the long delay here. Some comments below.
On 12.02.2016 21:27, Jagan Teki wrote:
On 12 February 2016 at 18:15, Stefan Roese wrote:
Currently only chip-select 0 is supported by the kirkwood SPI driver.
The Armada XP / 38x SoCs also use this driver and support multiple c
Hi,
I'm working on enabling the POST feature for the socfpga cyclone v platform
but I'm unable to define a proper address for the post word.
>From what I've read, I believe this word needs to point to a location on
the on chip RAM, especially for ARM based architectures.
Ref: http://lists.denx.de
For Secure Boot, a header is used to identify key table, signature and
image address. For Ls-Ch3, there is a new header structure being used.
Currently Key extension (IE) feature is not supported. Single Key
feature is not supported. Keys must be in table format. Hence, SRK (Key
table) is by defau
During secure boot, SMMU is enabled on POR by SP bootrom. SMMU needs
to be put in Bypass mode in uboot to enable CAAM transcations to pass
through.
During Nonsecure Boot, SP BootROM doesn't enable SMMU and at reset
SMMU is in bypass mode.
Signed-off-by: Aneesh Bansal
Signed-off-by: Saksham Jain
The GUR (DCFG) registers in CCSR space are in Little Endian format for
ls2080. Defined a config CONFIG_SYS_FSL_CCSR_GUR_LE in
arch/arm/include/asm/arch-fsl-layerscape/config.h
Signed-off-by: Aneesh Bansal
Signed-off-by: Saksham Jain
---
Changes for v2:
- No changes
Changes for v3:
This commit solves CAAM coherency issue on ls2080. When Caches are
enabled and CAAM's DMA's AXI transcations are not made cacheable, Core
reads/write data from/to Caches and CAAM does from Main Memory. This
forces data flushes to synchronize various data structures. But even if
any data in proximit
This patch adds support for the mvpp2 ethernet controller which is integrated
in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4),
which has been stripped of the in U-Boot unused portions.
Tested on the Marvell Armada 375 eval board db-88f6720.
Signed-off-by: Stefan Roese
This patch adds support for the mvpp2 ethernet controller which is integrated
in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4),
which has been stripped of the in U-Boot unused portions.
Tested on the Marvell Armada 375 eval board db-88f6720.
Signed-off-by: Stefan Roese
In case of fatal failure during secure boot execution (e.g. header not
found), it is needed that the execution stops. Earlier, we assert reset
request in case in case of failure. But if the RESET_REQ is not tied off
to HRESET, this allows the execution to continue.
This can either be taken care in
Sec_init has been called in the starting to initialize SEC Block (CAAM)
which will be used for Secure Boot validation later for both ls2080a
qds and rdb. 64-bit address in ESBC Header has been enabled as this SoC
is based on armv8. Secure Boot defconfigs created for boards (NOR Boot).
Signed-off-b
"fdt_high" env variable has been changed to 0xa000 for ls2080
during Secure Boot. This env_varible is used to specify the upper limit
to be used for copying flat device tree. This address must be visible
to kernel.
The "fdt_high" value has been set during Secure Boot to same value as
it's defa
When MMU is disabled, 64bit Write must be at a memory aligned at 64-bit
Boundary. So, this commit splits the 64-bit write into two 32-bit writes
as the memory location is not guaranteed to be 64-bit aligned. The
alignment exception only occurs when MMU is disabled.
Signed-off-by: Aneesh Bansal
Si
In LS2080, SFP is Little Endian and Verion is 3.4 . The base address is
0x01e80200. SFP will be used in Secure Boot to read fuses.
Signed-off-by: Aneesh Bansal
Signed-off-by: Saksham Jain
---
Changes for v2:
- No changes
Changes for v3:
- No changes
Changes for v4:
- Clea
For ls2080, Added configs for various IPs used during secure boot.
Added address and endianness for SEC and Security Monitor. SRK are
Fuses in SFP (Fuses for public key's hash). These are stored in Little
Endian format.
Signed-off-by: Aneesh Bansal
Signed-off-by: Saksham Jain
---
Changes for v2:
On 03/22/2016 01:59 PM, Semen Protsenko wrote:
From: Sam Protsenko
The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.
Some
Secure Boot ESBC has been enabled on FSL LS208x platforms.
Changes for v2:
- changed function fsl_secboot_validate to return address of image
- corrected Bootscript header for ls1043 and ls1021
Changes for v3:
- minor changes to remove compilation warnings
Changes for v4:
Hi Chenhui,
Do you have any update about how to fixup the related device node according to
the PSCI and spin-table?
> -Original Message-
> From: york sun
> Sent: 2016年3月18日 5:09
> To: Zhiqiang Hou ; Bhupesh Sharma
> ; Scott Wood ; Zhiqiang Hou
> ; u-boot@lists.denx.de;
> albert.u.b...@ar
For secure boot, currently we were using fixed bootargs for all SoCs.
This is not needed and we can use the bootargs which are used in
non-secure boot. Incase bootargs are not defined for non-secure boot
of any platform, we use default bootargs.
Signed-off-by: Aneesh Bansal
Signed-off-by: Saksham
Currently, fsl_secboot_validate function used to set env variable
"img_addr" to contain address of image being validated.
The function has been changed to output image addr via argument
img_addr_ptr. The command esbc_validate sets the env variable
"img_addr".
This change helps when fsl_secboot_va
During Secure Boot, a bootscript is validated using its header. This
patch copies both these images to DDR from NOR and then validates and
executed them from DDR. (If NOR is the boot source for LS2080).
This copy step is done to make this step common across booting sources.
Because in case of non-
During secure boot, Linux image along with other images are validated
using bootscript. This bootscript also needs to be validated before it
is executed. This requires a header for bootscript.
When secure boot is enabled, default bootcmd is changed to first
validate bootscript using the header and
On Wed, Mar 23, 2016 at 01:53:35PM +0100, Albert ARIBAUD wrote:
> Hello Marek,
>
> On Sun, 20 Mar 2016 17:15:34 +0100, Marek Vasut wrote:
> > This patch decouples U-Boot binary from the toolchain on systems where
> > private libgcc is available. Instead of pulling in functions provided
> > by the
On Wed, 2016-03-23 at 11:13 +0100, Hans de Goede wrote:
> Always select OF_BOARD_SETUP on sunxi, rather then having it in
> almost
> all our defconfigs. This also fixes it missing from some recently
> added defconfigs.
>
> This commit also modifies our ft_board_setup() to not cause warnings
> when
On Wed, 2016-03-23 at 11:13 +0100, Hans de Goede wrote:
> The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD
> slot,
> 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using
> the
> SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG,
> HDMI,
> a TRRS he
Hello Marek,
On Sun, 20 Mar 2016 17:15:34 +0100, Marek Vasut wrote:
> This patch decouples U-Boot binary from the toolchain on systems where
> private libgcc is available. Instead of pulling in functions provided
> by the libgcc from the toolchain, U-Boot will use it's own set of libgcc
> functio
This patch enable VID support for ls2080ardb platform.
It uses the common VID driver
Signed-off-by: Rai Harninder
---
Changes in v4:
- Fix implicit declaration warning for adjust_vdd()
by including approriate header file
Changes in v3:
- Call adjust_vdd() so that the voltage gets adjusted
during
From: Mingkai Hu
Signed-off-by: Mingkai Hu
Signed-off-by: Gong Qianyu
---
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index ea
It's necessary to set the clock phase and polarity for DSPI
flash or it could not work properly.
Signed-off-by: Gong Qianyu
---
arch/arm/dts/fsl-ls1043a-qds.dtsi | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi
b/arch/arm/dts/fsl-ls104
From: Mingkai Hu
Signed-off-by: Mingkai Hu
Signed-off-by: Gong Qianyu
---
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 1 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
b/arch/arm/includ
On 04.03.2016 08:32, Julian Scheel wrote:
Add support for platforms based on the Meerkat COM module. Includes support
for the minimal reference platform called Kein Baseboard, which in fact is
sufficient to run most existing Meerkat carriers.
Signed-off-by: Julian Scheel
---
Changes in v3:
-
Always select OF_BOARD_SETUP on sunxi, rather then having it in almost
all our defconfigs. This also fixes it missing from some recently
added defconfigs.
This commit also modifies our ft_board_setup() to not cause warnings
when CONFIG_VIDEO_DT_SIMPLEFB is not set, since we will now always
build i
1 - 100 of 119 matches
Mail list logo
