Use RTC watchdog feature as hardware watchdog.
Signed-off-by: Alexey Ignatov
---
drivers/watchdog/Makefile | 1 +
drivers/watchdog/mxsrtc_wdt.c | 23 +++
include/configs/mxs.h | 4
3 files changed, 28 insertions(+)
create mode 100644 drivers/watchdog/mxsrt
CONFIG_TPL should not be enabled for boards that do not have TPL.
CONFIG_SUPPORT_TPL introduced by this commit should be "select"ed
by boards with TPL support and CONFIG_TPL should depend on it.
Signed-off-by: Masahiro Yamada
---
Changes in v3: None
Changes in v2:
- bug fix. s/HAVE_SPL_SUPPOR
CONFIG_SPL should not be enabled for boards that do not have SPL.
CONFIG_SUPPORT_SPL introduced by this commit should be "select"ed
by boards with SPL support and CONFIG_SPL should depend on it.
Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
---
Changes in v3:
- Rebase on commit dd0204e
Masahiro Yamada (2):
kconfig: add CONFIG_SUPPORT_SPL
kconfig: add CONFIG_SUPPORT_TPL
Kconfig| 9 ++-
arch/arm/Kconfig | 45 ++
arch/arm/cpu/arm926ejs/davinci/Kconfig | 4 +++
arch/arm/cpu/armv7/exynos
Hello Jagannadha Sutradharudu Teki,
Am 05.09.2014 07:38, schrieb Heiko Schocher:
This patchserie add the popssibility to define mtd partitions on
spi nor flash, and use this settings with the sf commands.
steps:
- add MTD layer driver for spi, original patch from:
http://git.denx.de/?p=u-boot/
On 6 October 2014 23:49, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 6 October 2014 23:51, Masahiro Yamada wrote:
> The driver model supports two ways for passing device parameters;
> Device Tree and platform_data (board file).
> Each driver should generally support both of them because some
> popular IPs are used on various platforms.
>
> Assume the following s
On 6 October 2014 23:49, Masahiro Yamada wrote:
> The header files include/dm/platdata.h and include/dm/uclass.h
> use ll_entry_declare(); therefore they depend on
> include/linker_lists.h.
>
> Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
___
On 6 October 2014 23:48, Masahiro Yamada wrote:
> The header file include/linker_lists.h uses __aligned();
> therefore it depends on include/linux/compiler.h
>
> Signed-off-by: Masahiro Yamada
Acked-by: Simon Glass
___
U-Boot mailing list
U-Boot@lists
Enable this feature to support driver model before relocation.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/configs/exynos-common.h | 5 +++--
include/configs/odroid.h| 2 --
include/configs/s5p_goni.h | 5 +
Change this board to add a device tree.
Signed-off-by: Simon Glass
---
Changes in v6:
- Rebase on top of samsung/master and 'git pull upstream-arm master'
Changes in v4:
- Rebase on top of master (CONFIG_OF settings moved to Kconfig)
Changes in v3: None
Changes in v2:
- Avoid using a common fi
Most of the smdkv310 features are common with other exynos4 boards. To
permit easier addition of driver model support, use the common file and
add a device tree file.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4:
- Rebase on top of master (CONFIG_OF settings moved to Kconfig)
Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Reduce the number of common elements to avoid
We want exynos5250-dt.h to be a board which can support any exynos5250
device. This matches the naming used by Linux. As a first step, rename
the existing -dt files to -common to make it clear they are common files,
and not specific boards.
Signed-off-by: Simon Glass
---
Changes in v6: None
Chan
Things run faster when the data cache is enabled, so turn it on along with
the 'dcache' command.
Signed-off-by: Simon Glass
Tested-by: Ajay Kumar
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix 'cashe' typo in commit subject
include/configs/exynos5-dt.h |
These boards do not in fact have a Chrome OS EC, nor a TPS565090 PMIC, so
move the settings into a separate common file to be used by those that need
it.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/configs/exynos5-commo
Add a keyboard definition so that the keyboard can be used on pit.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Add new patch to enable keyboard on pit
arch/arm/dts/exynos5420-peach-pit.dts | 55 +++
Since exynos4 and exyno5 share many settings, we should move these into
a common file to avoid duplication.
In effect the changes are that all exynos boards now have EXT4 and FAT
write support. This affects exynos5250 and exynos5420 which previously
did not. This also disables the ext2 commands wh
Change this board to add a device tree.
This also adds a pinmux header file although it is not used as yet.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4:
- Rebase on top of master (CONFIG_OF settings moved to Kconfig)
Changes in v3:
- Adjust device tree file based on Robert
Unfortunately on Pit the AP has no direct access to the tps65090 but must
talk through the EC (over SPI) to the EC's I2C bus.
When driver model supports PMICs this will be relatively easy. In the
meantime the best approach is to duplicate the driver. It will be refactored
once driver model support
A few things are common but are not in the common file. Fix this and
rename the file to fit with the other exynos*-common files.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Leave CONFIG_SERIAL3 in the individual board files
- Reduce
With the driver model conversion we are going to be using driver model for
SPI and not for I2C. This works OK so long as a board doesn't need both
dm and non-dm versions of the cros_ec driver. Since pit uses SPI and snow
uses I2C we need to split the configs so that only one driver is compiled
for
Exynos 5250 boards (snow, spring) use the I2C driver but Exynos 5420 boards
cannot due to a hardware design decision. Select the correct driver to use
in each case.
Signed-off-by: Simon Glass
Tested-by: Ajay Kumar
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in v2:
-
Hi Minkyu,
On 7 October 2014 19:09, Minkyu Kang wrote:
> On 08/10/14 00:14, Simon Glass wrote:
>> Hi Minkyu,
>>
>> On 7 October 2014 05:24, Minkyu Kang wrote:
>>> Dear Simon Glass,
>>>
>>> On 06/10/14 03:39, Simon Glass wrote:
Hi Minkyu,
On 1 October 2014 21:44, Simon Glass wrote
The device seems to hang in SPL if the full speed is used when booting from
USB, perhaps because the PMIC has not been set to the maximum ARM core
voltage yet. Slow it down to a reliable speed.
Signed-off-by: Simon Glass
---
Changes in v6: None
Changes in v4: None
Changes in v3: None
Changes in
This series tries to unify the Samsung board configs into a few header
files for exynos5 and exynos4.
The purpose is to make it easier to move to driver model. In that case
I would like things like the GPIO drivers and serial drivers to work in
a standard way, and not need to support device tree a
Signed-off-by: Xiubo Li
---
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 17 +
board/freescale/common/Makefile| 2 ++
board/freescale/common/ls102xa_stream_id.c | 19 +++
board/freescale/ls1021aqds/ls1021aqds.c| 22 +
The Central Security Unit (CSU) allows secure world software to
change the default access control policies of peripherals/bus
slaves, determining which bus masters may access them. This
allows peripherals to be separated into distinct security domains.
Combined with SMMU configuration of the system
Enable hypervisors utilizing the ARMv7 virtualization extension
on the LS1021A-QDS/TWR boards with the A7 core tile, we add the
required configuration variable.
Also we define the board specific smp_set_cpu_boot_addr() function
to set the start address for secondary cores in the LS1021A specific
ma
Change for V2:
- All the registers are defined as a struct, here use it.
- Use CONFIG_PEN_ADDR_BIG_ENDIAN instead of CONFIG_SOC_BIG_ENDIAN.
Xiubo Li (4):
ARM: HYP/non-sec: add the pen address byte reverting support.
ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
ls102xa: HYP/non-se
For some SoCs, the pen address may has different endianness with
the CPUs, so this need the byte revertion for it,
Signed-off-by: Xiubo Li
---
arch/arm/cpu/armv7/nonsec_virt.S | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt
For some SoCs, the CONFIG_SYS_CLK_FREQ maybe won't equal the ARCH
Timer's frequency.
Here using the CONFIG_TIMER_CLK_FREQ instead if the ARCH Timer's
frequency need to config here.
Signed-off-by: Xiubo Li
---
arch/arm/cpu/armv7/nonsec_virt.S | 4 ++--
include/configs/sun7i.h | 1 +
2 f
The x86 bootm code is quite special, and geared to zimage. Adjust it
to support device tree and make it more like the ARM code, with
separate bootm stages and functions for each stage.
Create a function announce_and_cleanup() to handle printing the
"Starting kernel ..." message and put it in bootm
If we are passing this using the device tree then we may not want to
set this up here.
Signed-off-by: Simon Glass
---
Changes in v2: None
arch/x86/lib/zimage.c | 21 -
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage
Add a new setup@ section to the FIT which can be used to provide a setup
binary for booting Linux on x86. This makes it possible to boot x86 from
a FIT.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add a README to explain how to use this feature
- Correct addresses in kernel.its example file
These options are used by the image code. To allow us to use the generic
code more easily, define these for x86.
Signed-off-by: Simon Glass
---
Changes in v2: None
arch/x86/include/asm/config.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/include/asm/config.h b/arch/x86/incl
This little series adds support for booting FITs on x86. A FIT is a single
file that can contain a kernel, device tree and ramdisk.
x86 kernels require a setup.bin file to boot. Rather than try to pack this
into the image in a clever way, this series just adds it as another image
in the FIT. At pr
On 08/10/14 00:14, Simon Glass wrote:
> Hi Minkyu,
>
> On 7 October 2014 05:24, Minkyu Kang wrote:
>> Dear Simon Glass,
>>
>> On 06/10/14 03:39, Simon Glass wrote:
>>> Hi Minkyu,
>>>
>>> On 1 October 2014 21:44, Simon Glass wrote:
Hi Minkyu,
On 1 October 2014 21:43, Simon Glass w
Hi Marek,
I'm marking only the critical issues that are left unfixed from previous
conversations, to speed-up the process a little bit.
I'll send later patches for the non-critical issues to spare you the
extra work (and I'm sure my constructive criticism is already boring :D ).
On 10/06/201
Hello Tom,
On 07-10-14 02:28, Tom Rini wrote:
Hey all,
I've pushed v2014.10-rc4 out to the repository and tarballs should exist
soon.
I've lagged a bit behind in tagging this, but I think we'll be alright
in the end. I've made
http://patchwork.ozlabs.org/bundle/trini/for-v2014.10-release/ for
Commit 832472 "tools: socfpga: Add socfpga preloader signing
to mkimage" added tools/socfpga.c which relies on htole32,
le32toh and friends. While compiler.h includes these protypes
for linux from endian.h, it doesn't do so for FreeBSD. Hence
include for FreeBSD.
Cc: Marek Vasut
CC: Tom Rini
Si
The run command treats each argument an an environment variable. It gets the
value of each variable and executes it as a command. If an environment
variable contains a newline and the hush cli is used, it is supposed to
execute each line one after the other.
Normally a newline signals to hush to e
Hi Detlev,
On Tue, 2014-10-07 at 11:38 +0200, Detlev Zundel wrote:
> Hello Masahiro-san,
>
> [...]
>
> > Perhaps, is it better to insert 5-minute break between talks?
> > Speakers might need to get something prepared. (connecting their
> > laptop to the beamer, etc.)
>
> Of course. I did not e
Hi!
> > > +static u8 eeprom_defaults[] = {
> > > + /* 0x00 */
> > > + 0xA5, /* Signature */
> > > + 0xFF, 0xFF, /* MAC bytes 0-1 */
> > > + 0xFF, 0xFF, /* MAC bytes 2-3 */
> > > + 0xFF, 0xFF, /* MAC bytes 4-5 */
> >
> > Normally, we use all zeros for unset...?
>
> That's wh
On Tue, Oct 07, 2014 at 01:16:00PM +0200, Albert ARIBAUD wrote:
> Hi Tom,
>
> The following changes since commit
> be9f643ae6aa9044c60fe80e3a2c10be8371c692:
>
> Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26
> 20:10:48 -0400)
>
> are available in the git repository at:
>
Hi Minkyu,
On 7 October 2014 05:24, Minkyu Kang wrote:
> Dear Simon Glass,
>
> On 06/10/14 03:39, Simon Glass wrote:
>> Hi Minkyu,
>>
>> On 1 October 2014 21:44, Simon Glass wrote:
>>> Hi Minkyu,
>>>
>>> On 1 October 2014 21:43, Simon Glass wrote:
This series tries to unify the Samsung boa
Thanks Stefano,
On 10/07/2014 07:36 AM, Stefano Babic wrote:
> Hi Eric,
>
> On 06/10/2014 18:41, Eric Nelson wrote:
>
>>> I understand the use case, but it does not always work (I mean, in all
>>> network configurations) and we regret generally having IP addresses hard
>>> coded in the default c
those are the addresses suggested by u-boot and yes, i already tried
moving stuff around but it didn't fix it: what's the working config
with your board? u-boot version?
On Tue, Oct 7, 2014 at 4:34 PM, Guillaume Gardet
wrote:
> Hi,
>
> Le 07/10/2014 14:58, Paolo Pisati a écrit :
>
>> Hi,
>>
>> i'
Hi Eric,
On 06/10/2014 18:41, Eric Nelson wrote:
>> I understand the use case, but it does not always work (I mean, in all
>> network configurations) and we regret generally having IP addresses hard
>> coded in the default configuration.
>>
>
> Can you clarify which parts (mac/IP address/both) a
Hi,
Le 07/10/2014 14:58, Paolo Pisati a écrit :
Hi,
i've been trying to update the u-boot on my board (sd booting), from the Linaro
one (2012.10) to a v2014.X, but so far had no luck:
make arndale_config
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make
...
dd if=arndale-bl1.bin of=/de
I was running into this limit with a not overly long PXE append line.
Since the PXE code wants to print the resulting command line increase
CONFIG_SYS_PBSIZE too.
Signed-off-by: Ian Campbell
---
include/configs/sunxi-common.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
I was running into this limit with a not overly long PXE append line.
Since the PXE code wants to print the resulting command line increase
CONFIG_SYS_PBSIZE too.
Signed-off-by: Ian Campbell
---
include/configs/arndale.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/in
Hi,
i've been trying to update the u-boot on my board (sd booting), from the Linaro
one (2012.10) to a v2014.X, but so far had no luck:
make arndale_config
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make
...
dd if=arndale-bl1.bin of=/dev/sdc bs=512 skip=1
dd if=arndale-spl.bin of=/dev/s
Hi Ian,
In any case, if a patch is not to be applied but only commented, please
think of adding the [RFC] tag to it.
On Tue, 07 Oct 2014 14:45:01 +0100, Ian Campbell
wrote:
> On Tue, 2014-10-07 at 14:36 +0100, Ian Campbell wrote:
>
> Please ignore, I ran git send-email from the wrong branch, t
From: Ian Campbell
This is based on some old patches from the chromeos-v2011.12 branch of
http://git.chromium.org/chromiumos/third_party/u-boot.git by Taylor Hutt.
Specifically:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit;h=26f6c570b5deb37c52306920ae049203c68f014
From: Ian Campbell
NOT TO BE APPLIED AS IS
Without this Linux fails to correctly init the phy (or something) and cannot
detect the disk.
Even with this we can fail to detect the disk outselves on some fraction of
boots, so something else is clearly up too.
---
arch/arm/cpu/armv7/exynos/sata.c
Hello,
The following series ports over Taylor Hutt's patches to enable SATA for
the Chromeos smdk5250 u-boot and enables it for arndale (but not
smdk5250 since I don't have one).
In terms of basic access from u-boot it works for me but there is a
strange issue once booted Linux, which is that it
On Tue, 2014-10-07 at 14:36 +0100, Ian Campbell wrote:
Please ignore, I ran git send-email from the wrong branch, this isn't
ready yet...
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
From: Ian Campbell
I was running into this limit with a not overly long PXE append line.
Since the PXE code wants to print the resulting command line increase
CONFIG_SYS_PBSIZE too.
Signed-off-by: Ian Campbell
---
include/configs/arndale.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletion
From: Ian Campbell
NOT TO BE APPLIED AS IS
Without this Linux fails to correctly init the phy (or something) and cannot
detect the disk.
Even with this we can fail to detect the disk outselves on some fraction of
boots, so something else is clearly up too.
---
arch/arm/cpu/armv7/exynos/sata.c
From: Ian Campbell
I was running into this limit with a not overly long PXE append line.
Since the PXE code wants to print the resulting command line increase
CONFIG_SYS_PBSIZE too.
Signed-off-by: Ian Campbell
---
include/configs/sunxi-common.h | 4 ++--
1 file changed, 2 insertions(+), 2 del
On Tuesday, October 07, 2014 at 03:35:40 PM, Alban Bedel wrote:
> On Tue, 7 Oct 2014 14:22:09 +0200
>
> Pavel Machek wrote:
> > On Tue 2014-10-07 11:19:37, Alban Bedel wrote:
> > > Use the new ethernet eeprom API to allow the user to read/write the
> > > EEPROM.
> > >
> > > Change-Id: I21233b6ee
On Tue, 7 Oct 2014 14:22:09 +0200
Pavel Machek wrote:
> On Tue 2014-10-07 11:19:37, Alban Bedel wrote:
> > Use the new ethernet eeprom API to allow the user to read/write the
> > EEPROM.
> >
> > Change-Id: I21233b6ee805a75bd8a03ca12e22c41421b7629c
> > Signed-off-by: Alban Bedel
> > ---
> > dri
pic/dwc2-20140930
[3] http://git.denx.de/?p=u-boot/u-boot-
socfpga.git;a=shortlog;h=refs/heads/topic/drivers/spi-20141006
[4] http://git.denx.de/?p=u-boot/u-boot-
socfpga.git;a=shortlog;h=refs/heads/topic/arm/socfpga-next-20141007
___
U-Boot mailing list
* fdt_fixup_mtdparts is called from ft_board_setup
* Run "mtdparts default" to create NAND partition on uboot
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar
---
board/freescale/bsc9131rdb/bsc9131rdb.c | 11 +
On Tue 2014-10-07 11:19:37, Alban Bedel wrote:
> Use the new ethernet eeprom API to allow the user to read/write the
> EEPROM.
>
> Change-Id: I21233b6ee805a75bd8a03ca12e22c41421b7629c
> Signed-off-by: Alban Bedel
> ---
> drivers/usb/eth/smsc95xx.c | 199
> +++
Dear Simon Glass,
On 06/10/14 03:39, Simon Glass wrote:
> Hi Minkyu,
>
> On 1 October 2014 21:44, Simon Glass wrote:
>> Hi Minkyu,
>>
>> On 1 October 2014 21:43, Simon Glass wrote:
>>> This series tries to unify the Samsung board configs into a few header
>>> files for exynos5 and exynos4.
>>>
Hi Tom,
The following changes since commit
be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26
20:10:48 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-arm master
for you to fetch changes up to c19a8bc5711ec
Hi Stefan,
On Sat, 6 Sep 2014 19:47:06 +0200, Stefan Agner
wrote:
> From: Anthony Felice
>
> Removed settings in unsupported register fields. They didn’t
> do anything, and in most cases, were not documented in the
> reference manual.
>
> Changed register settings to comply with JEDEC requir
Signed-off-by: Ruchika Gupta
---
Changes from v3
Added new defconfigs in MAINTAINERS
board/freescale/ls1021aqds/MAINTAINERS | 1 +
board/freescale/ls1021atwr/MAINTAINERS | 1 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 3 +++
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 3 +++
Enable blob commands for platforms having SEC 4.0 or greater
for secure boot scenarios
Signed-off-by: Ruchika Gupta
---
Changes from v3
No changes
include/configs/B4860QDS.h | 4
include/configs/BSC9132QDS.h | 4
include/configs/P1010RDB.h | 4
include/configs/P2041RDB.h |
Freescale's SEC block has built-in Blob Protocol which provides
a method for protecting user-defined data across system power
cycles. SEC block protects data in a data structure called a Blob,
which provides both confidentiality and integrity protection.
Encapsulating data as a blob
Each time that
Signed-off-by: Ruchika Gupta
---
Changes from v3
Added new defconfigs in MAINTAINERS
board/freescale/ls1021aqds/MAINTAINERS | 1 +
board/freescale/ls1021atwr/MAINTAINERS | 1 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 3 +++
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 3 +++
Enable blob commands for platforms having SEC 4.0 or greater
for secure boot scenarios
Signed-off-by: Ruchika Gupta
---
Changes from v3
No changes
include/configs/B4860QDS.h | 4
include/configs/BSC9132QDS.h | 4
include/configs/P1010RDB.h | 4
include/configs/P2041RDB.h |
Hardware accelerated support for SHA-1 and SHA-256 has been added.
Hash command enabled along with hardware accelerated support for
SHA-1 and SHA-256 for platforms which have CAAM block.
Signed-off-by: Ruchika Gupta
---
Changes from v1:
Rebased to HEAD of uboot
Compilation warning fixed in ls1021
Hi Masahiro,
On Sun, 5 Oct 2014 14:32:12 +0900, Masahiro YAMADA
wrote:
> Hi Albert,
>
>
> The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
>
> Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26
> 20:10:48 -0400)
>
> are available in the git reposi
On Tuesday, October 07, 2014 at 11:52:33 AM, Sean Cross wrote:
> On 07/10/2014 00:02, Marek Vasut wrote:
> > Add support for the Kosagi Novena board. Currently supported are:
> > - I2C busses
> > - FEC Ethernet
> > - MMC0, MMC1, Booting from MMC
> > - SATA
> > - USB ports
> > - USB Ethernet
>
> Th
Hardware accelerated support for SHA-1 and SHA-256 has been added.
Hash command enabled along with hardware accelerated support for
SHA-1 and SHA-256 for platforms which have CAAM block.
Signed-off-by: Ruchika Gupta
---
Changes in v2
Warning fixed for ls1021atwr build
arch/arm/include/asm/arch-
After doing this error too many times myself add a check for left
over tags from gerrit and co.
Signed-off-by: Alban Bedel
---
scripts/checkpatch.pl | 15 +++
1 file changed, 15 insertions(+)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 74db2e2..3f1dedf 100755
--
On 07/10/2014 00:02, Marek Vasut wrote:
> Add support for the Kosagi Novena board. Currently supported are:
> - I2C busses
> - FEC Ethernet
> - MMC0, MMC1, Booting from MMC
> - SATA
> - USB ports
> - USB Ethernet
>
This patch looks good. It resets the FPGA, muxes the correct UART
lines, and detect
Hello Masahiro-san,
[...]
> Perhaps, is it better to insert 5-minute break between talks?
> Speakers might need to get something prepared. (connecting their
> laptop to the beamer, etc.)
Of course. I did not explicitely include this in the agenda, but such a
5 minute break is what I'll strive t
Hi Albert,
[...]
> I would have liked to attend, but for personal reasons could not free
> myself up.
That's of course unfortunate.
> Is there any possibility of a Google Hangout or anything similar?
To be honest - I have no idea how to do this or if this is feasible.
Last year Marek volunteer
Use the new ethernet eeprom API to allow the user to read/write the
EEPROM.
Change-Id: I21233b6ee805a75bd8a03ca12e22c41421b7629c
Signed-off-by: Alban Bedel
---
drivers/usb/eth/smsc95xx.c | 199 +++--
1 file changed, 192 insertions(+), 7 deletions(-)
diff
Many ethernet devices use an EEPROM to store various settings, most
commonly the device MAC address. But on some devices it can contains
a lot more, for example USB device might also have many USB related
parameters.
This commit add a set of commands to read/write this EEPROM, write a
default conf
Hi Simon
> On 15 September 2014 07:06, Christian Gmeiner
> wrote:
>>
>> This new function is used to set all display-timings
>> properties based on fb_videomode.
>>
>> display-timings {
>> timing0 {
>> clock-frequency = <2500>;
>> hactive = <640>;
>>
On Tue, 7 Oct 2014 10:58:51 +0200
Christian Gmeiner wrote:
> Signed-off-by: Christian Gmeiner
> ---
> board/bachmann/ot1200/Kconfig | 5 -
> 1 file changed, 5 deletions(-)
>
> diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig
> index 55a825d..6cf2573 100644
> ---
Signed-off-by: Christian Gmeiner
---
board/bachmann/ot1200/Kconfig | 5 -
1 file changed, 5 deletions(-)
diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig
index 55a825d..6cf2573 100644
--- a/board/bachmann/ot1200/Kconfig
+++ b/board/bachmann/ot1200/Kconfig
@@ -1,23 +
Hi Tom,
Sorry for the mistake of sending mail of Uboot send pull request.
Please forget and ignore this mail.
Following is the content of previous Uboot send pull request mail:
=
Hi Tom,
Please pull the following pat
Hi
In reply to this, can anyone please suggest me, how to debug the
fw_printenv code in u-boot?
I am using buildroot-2014.02, which used uboot-tools-2014.01. But I am
having few custom changes in uboot-2010.03, those I want to use, in
tools-2014.01 I can see as of now, the code fails on fw_printen
Hi Tom,
Please pull the following patch from u-boot-nds32 into your tree.
Thanks!
The following changes since commit d05bfd0586ccebe96e31976459c8ef45ec65e109:
Merge branch 'master' of git://git.denx.de/u-boot-i2c (2013-08-06 09:49:06
-0400)
are available in the git repository at:
git://gi
On Mon, Oct 6, 2014 at 5:39 PM, Yegor Yefremov
wrote:
> U-Boot 2014.07
>
> I'm trying to use ping 44..47 as input. I've configured PINMUX and
> invoked request, direction etc. I always get 0 from gpio_get_value()
>
> int val;
>
> gpio_request(44, "dip_s1"):
> gpio_request(4
> -Original Message-
> From: DrEagle [mailto:drea...@doukki.net]
> Sent: 07 October 2014 12:59
> To: Prafulla Wadaskar
> Cc: drEagle; Albert ARIBAUD; Nobuhiro Iwamatsu; U-Boot;
> Pantelis Antoniou; Tom Rini
> Subject: RE: [PATCH 0/5] ARM: sheevaplug: refresh for
> 201410
>
> Thank you Pr
Thank you Prafulla,
Is there a pull request planned to master 2014-10 release from
git-marvell ?
Regards
Le 2014-10-01 13:21, Prafulla Wadaskar a écrit :
-Original Message-
From: drEagle [mailto:drea...@doukki.net]
Sent: 26 September 2014 14:47
To: Prafulla Wadaskar; Albert ARIBAUD
C
The prcm apb0 controls multiple modules. Allow specifying which
modules to enable clocks and de-assert resets so the function
can be reused.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/cpu/armv7/sunxi/prcm.c| 12 +++-
arch/arm/include/asm/arch-sunxi/prcm.h | 2 +-
2 files changed,
The basic blocks of the A23 are similar to the A31 (sun6i). Re-use
sun6i code for initial clock, gpio, and uart setup.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/Kconfig| 3 +++
arch/arm/cpu/armv7/sunxi/Makefile | 2 ++
arch/arm/cpu/armv7/sunxi/board.c| 3 +
Ippo q8h is a series of A23 tablet boards. This defconfig
is for v5 of these boards, though for u-boot purposes they
are mostly the same.
See: http://linux-sunxi.org/Ippo_q8h
Signed-off-by: Chen-Yu Tsai
---
board/sunxi/MAINTAINERS| 5 +
configs/Ippo_q8h_defconfig | 4
2 files chang
The A23 only has UART0 muxed with MMC0. Some of the boards we
encountered expose R_UART as a set of pads.
Add support for R_UART so we can have a console while using mmc.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/cpu/armv7/sunxi/board.c | 4
arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 6
BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when
CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally
include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI.
This is used when we want to use uart0 from port F, which conflicts
with mmc0.
Signed-off-by: C
UART0 pin muxes on the A23 have a different function value.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/include/asm/arch-sunxi/gpio.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h
b/arch/arm/include/asm/arch-sunxi/gpio.h
index ba7e69b..b94ec4d 100
Allwinner SoCs provide uart0 muxed with mmc0, which can then be used
with a micro SD breakout board. On the A23, this is the only way to
use uart0.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/cpu/armv7/sunxi/board.c | 11 ++-
include/configs/sunxi-common.h | 2 ++
2 files changed, 12 ins
1 - 100 of 103 matches
Mail list logo
