Re: [U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support

Hello Naveen, On 26.04.2013 05:08, Naveen Krishna Ch wrote: > On 14 April 2013 22:48, Heiko Schocher wrote: >> Hello Naveen Krishna, >> >> >> On 13.04.2013 06:42, Naveen Krishna Ch wrote: >>> >>> On 6 April 2013 07:07, Naveen Krishna Chatradhi >>> wrote: Add support for hsi2c controll

Re: [U-Boot] [PULL] : Please pull u-boot-i2c

Hello Tom, On 29.04.2013 18:25, Tom Rini wrote: > On Mon, Apr 29, 2013 at 04:18:08PM +0200, Heiko Schocher wrote: > >> Hello Tom, >> >> please pull from u-boot-i2c: >> >> The following changes since commit 500bccf84408ad71674b714cd9db3480736ad8e1: >> >> Merge branch 'master' of git://www.denx.d

Re: [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support

2013/4/30 Scott Wood : > On 04/28/2013 10:28:14 PM, Kuo-Jung Su wrote: >> >> 2013/4/27 Scott Wood : >> >> > Shouldn't .eccpos depend on HWECC? >> > >> > >> >> Actually it means nothing here, the ECC function is designed to be some >> kind of >> a blackbox to users (i.e softwares), the actual positi

Re: [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support

2013/4/30 Marek Vasut : > Dear Kuo-Jung Su, > >> 2013/4/26 Marek Vasut : >> > Dear Kuo-Jung Su, >> > >> >> From: Kuo-Jung Su >> >> >> >> This patch add supports to both Faraday FUSBH200 and FOTG210, >> >> these controllers slightly differ from standard EHCI specification. >> > >> > How do they dif

Re: [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114

Dear Jim Lin, > Tegra30 and Tegra114 are compatible except > 1. T30 takes 55 ms to finish Port Reset. T114 takes >50 ms. > 2. PLL parameters > > Tested on Tegra20 Harmony/Seaboard, Tegra30 Cardhu, and Tegra114 Dalmore > platforms. All works well. > > Signed-off-by: Jim Lin > --- > arch/arm

[U-Boot] [PATCH] fdtdec: Add compatible string for High speed i2c

Adds a new COMPAT string exynos5-hsi2c for high speed i2c controller available on exynos5 SoCs from Samsung. Signed-off-by: Naveen Krishna Chatradhi --- This patch is required for the following change http://lists.denx.de/pipermail/u-boot/2013-April/151886.html and fixes the following issue. http

Re: [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support

Dear Kuo-Jung Su, > 2013/4/26 Marek Vasut : > > Dear Kuo-Jung Su, > > > >> From: Kuo-Jung Su > >> > >> This patch add supports to both Faraday FUSBH200 and FOTG210, > >> these controllers slightly differ from standard EHCI specification. > > > > How do they differ? > > 1. The reserved registe

Re: [U-Boot] [PATCH] git-mailrc: Add trini shortcut

On Wed, Apr 24, 2013 at 09:31:40AM +0200, Michal Simek wrote: > Easier for using with patman. > > Signed-off-by: Michal Simek Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature ___ U-Boot mailing list U-Boot@list

Re: [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks

Dear Paul B. Henson, > On 4/25/2013 6:13 PM, Marek Vasut wrote: > > I didn't really track the thread and I'm plenty busy, besides I had quite > > a clash with Trent in another thread, sorry about me being plenty > > unpleasant. Anyway, can you please sum what is going on and what you > > came up w

Re: [U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks

On 4/25/2013 6:13 PM, Marek Vasut wrote: I didn't really track the thread and I'm plenty busy, besides I had quite a clash with Trent in another thread, sorry about me being plenty unpleasant. Anyway, can you please sum what is going on and what you came up with? Most of the analysis came from

Re: [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support

On 04/28/2013 10:28:14 PM, Kuo-Jung Su wrote: 2013/4/27 Scott Wood : > Shouldn't .eccpos depend on HWECC? > > Actually it means nothing here, the ECC function is designed to be some kind of a blackbox to users (i.e softwares), the actual position of ECC codes are not documented in the datashe

Re: [U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3

Hi Stefano, On Monday, April 29, 2013 10:41:18 PM, Benoît Thébaudeau wrote: > There is no change of behavior. > > Signed-off-by: Benoît Thébaudeau > --- [...] > diff --git a/board/freescale/mx35pdk/mx35pdk.c > b/board/freescale/mx35pdk/mx35pdk.c > index 9993d7b..12e84d7 100644 > --- a/board/free

[U-Boot] [PATCH 5/6] imx: woodburn: Convert to iomux-v3

There is no change of behavior. Signed-off-by: Benoît Thébaudeau --- board/woodburn/woodburn.c | 69 - 1 file changed, 37 insertions(+), 32 deletions(-) diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c index 7c36af0..3f2e6b5 100644

[U-Boot] [PATCH 4/6] imx: mx35pdk: Convert to iomux-v3

There is no change of behavior. Signed-off-by: Benoît Thébaudeau --- board/freescale/mx35pdk/mx35pdk.c | 173 - 1 file changed, 74 insertions(+), 99 deletions(-) diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index 9993d7

[U-Boot] [PATCH 2/6] imx: flea3: Convert to iomux-v3

There is no change of behavior. Signed-off-by: Benoît Thébaudeau --- board/CarMediaLab/flea3/flea3.c | 91 +-- 1 file changed, 48 insertions(+), 43 deletions(-) diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c index f2b4284..af

[U-Boot] [PATCH 6/6] imx: mx35: Remove legacy iomux support

Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau --- arch/arm/cpu/arm1136/mx35/Makefile |1 - arch/arm/cpu/arm1136/mx35/iomux.c | 114 - arch/arm/include/asm/arch-mx35/iomux.h | 296 -

[U-Boot] [PATCH 3/6] imx: mx35pdk: Fix WDOG_RST iomux function

The signal connected from this pin to the PMIC is WDOG_B, i.e. ALT0 mode, not ALT1 (which even corresponds to nothing). Signed-off-by: Benoît Thébaudeau --- board/freescale/mx35pdk/mx35pdk.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx35pdk/mx35pdk.c

Re: [U-Boot] u-boot UBI support

On 4/29/2013 1:57 AM, Sascha Silbe wrote: UBIFS error (pid 0): ubifs_get_sb: cannot open "recovery", error -22 UBIFS error (pid 0): ubifs_mount: Error reading superblock on volume 'recovery' errno=-22! Try increasing CONFIG_SYS_MALLOC_LEN, e.g. to 4MiB. That fixed it for me on a different board

Re: [U-Boot] [U-Boot, 1/3] cm-t35: move cm-t35 to live in compulab directory

On Mon, Apr 22, 2013 at 01:06:53AM -, Igor Grinberg wrote: > Currently the cm-t35 support code lives under board/cm_t35 directory. > Some of the code can be shared with other/future CompuLab boards, > so move the cm-t35 to live under board/compulab/cm_t35 directory. > > Signed-off-by: Igor Gr

Re: [U-Boot] [PATCH 1/2] da850: provide davinci_enable_uart0

On Mon, Apr 22, 2013 at 05:54:59PM +0200, Eric B??nard wrote: > this is needed to bring UART0 out of reset but this function > currently only exists for dm644x/355/365/646x when da850 (at > least am1808 also need it). > > Signed-off-by: Eric B??nard Along with 2/2, applied to u-boot-ti/master,

Re: [U-Boot] [U-Boot, 1/2] ARM:Panda:Fix device tree loading for the panda-es

On Thu, Apr 18, 2013 at 06:29:53AM -, Dan Murphy wrote: > Fix the device tree loading for panda(4430) and panda-es(4460) > > Modify the board name if a 4460 panda or panda-es is detected > at run time. > In the findfdt add a check for the panda-es board name and load > the panda-es device tre

Re: [U-Boot] ARM: OMAP5: Fix warm reset with USB cable connected

On Wed, Apr 17, 2013 at 08:49:40PM -, Lokesh Vutla wrote: > Warm reset on OMAP5 freezes when USB cable is connected. > Fix requires PRM_RSTTIME.RSTTIME1 to be programmed > with the time for which reset should be held low for the > voltages and the oscillator to reach stable state. > > There a

Re: [U-Boot] Remove duplicate / unused #defines on AM335x boards

On Wed, Apr 17, 2013 at 08:22:47AM -, Mark Jackson wrote: > As part of a review of a recent patch to add a new AM335x board, Tom > found several duplicate and/or unused #defines. > > This patch simply removes them. > > The two affected configs have been recompiled to check nothing was > brok

Re: [U-Boot] omap5_common: Add optargs variable for kernel command line args

On Thu, Apr 11, 2013 at 05:22:10AM -, Tom Rini wrote: > Add 'optargs' variable to be set to additional kernel arguments, similar > to omap3*/am3* usage. > > Cc: Sricharan R > Signed-off-by: Tom Rini Applied to u-boot-ti/master, thanks! -- Tom signature.asc Description: Digital signatur

Re: [U-Boot] [U-Boot, v3] OMAP5: USB: hsusbtll_clkctrl has to be in hw_auto for USB to work

On Thu, Apr 11, 2013 at 12:08:51AM -, Lubomir Popov wrote: > USB TLL clocks do not support 'explicit_en', only 'hw_auto' > control (R. Sricharan). cm_l3init_hsusbtll_clkctrl has to be > moved to the clk_modules_hw_auto_essential[] array in order > to make the clock work. > > This fix is neede

Re: [U-Boot] [U-Boot, PATCHv2, 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS.

On Thu, Apr 04, 2013 at 10:27:57PM -, Enric Balletbo i Serra wrote: > These boards uses Samsung K4B2G1646E-BIH9 a 2Gb E-die DDR3 SDRAM. > > Signed-off-by: Enric Balletbo i Serra Along with 2/2, applied to u-boot-ti/master, thanks! -- Tom signature.asc Description: Digital signature

Re: [U-Boot] [U-Boot, V2] arm: omap: emif: Fix DDR3 init after warm reset

On Wed, Mar 27, 2013 at 08:24:42PM -, Lokesh Vutla wrote: > EMIF supports a global warm reset mode, during which the > EMIF keeps the SDRAM content. But if leveling is enabled > at the time of warm reset for DDR3, the following steps > needs to be done after warm reset: > 1) Keep EMIF in self

Re: [U-Boot] beagleboard: Update comment in get_board_rev()

On Tue, Apr 16, 2013 at 10:32:12AM -, Tom Rini wrote: > We are able to tell the difference between xM Rev Ax/Bx and xM Rev Cx, > and have been for some time. The comment above the function however did > not list this, so update. > > Signed-off-by: Tom Rini Applied to u-boot-ti/master, than

Re: [U-Boot] [PATCH] am33xx: Fix warning with CONFIG_DISPLAY_CPUINFO

On Fri, Apr 26, 2013 at 11:42:12PM +0200, Peter Korsgaard wrote: > > "Tom" == Tom Rini writes: > > Tom> The arm_freq and ddr_freq variables are unused, so remove. Fixup > Tom> whitespace slightly while in here. > > Tom> Signed-off-by: Tom Rini > > Reviewed-by: Peter Korsgaard Applied

Re: [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

Hi Marek, On Mon, Apr 29, 2013 at 2:19 PM, Marek Vasut wrote: > This should be done in board//mx23evk/spl_boot.c alongside iomux, no? Yes, but the end result of DDR IOMUX settings are not correct in this file. Let's take HW_PINCTRL_DRIVE9 register for example: => md.l 0x80018290 80018290:

Re: [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

Dear Fabio Estevam, > Hi Marek, > > On Mon, Apr 29, 2013 at 12:40 PM, Marek Vasut wrote: > >> Without the patch skipping registers, the console output gets scrambled. > > > > Ok, so we have issue in spl_mem_init.c for MX23. > > This is my thought as well. > > I sent the "skipping registers" t

Re: [U-Boot] [PULL] : Please pull u-boot-i2c

On Mon, Apr 29, 2013 at 04:18:08PM +0200, Heiko Schocher wrote: > Hello Tom, > > please pull from u-boot-i2c: > > The following changes since commit 500bccf84408ad71674b714cd9db3480736ad8e1: > > Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash (2013-04-22 > 09:12:16 -0400) >

Re: [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

Hi Marek, On Mon, Apr 29, 2013 at 12:40 PM, Marek Vasut wrote: >> Without the patch skipping registers, the console output gets scrambled. > > Ok, so we have issue in spl_mem_init.c for MX23. This is my thought as well. I sent the "skipping registers" to Kiril after comparing U-boot code again

Re: [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

Dear Kiril Zyapkov, > Hello everyone, > > On 29/04/13 15:30, Otavio Salvador wrote: > > Hello Marek, > > > > (adding Kiril in Cc as he been quite friendly in testing U-Boot in > > OlinuXino) > > Per Otavio's instructions: >* checked out git://git.denx.de/u-boot-imx.git, branch master >*

[U-Boot] [PULL] : Please pull u-boot-i2c

Hello Tom, please pull from u-boot-i2c: The following changes since commit 500bccf84408ad71674b714cd9db3480736ad8e1: Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash (2013-04-22 09:12:16 -0400) are available in the git repository at: git://git.denx.de/u-boot-i2c.git master

Re: [U-Boot] [PATCH 01/16] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support

Hello Dirk, On 25.04.2013 14:40, Dirk Eibach wrote: > Signed-off-by: Dirk Eibach > Cc: Heiko Schocher > Cc: Stefan Roese > --- > This patch is based on > http://git.denx.de/?p=u-boot/u-boot-i2c.git;a=shortlog;h=refs/heads/20130416_multibus_v2. > Heiko said: > "... and if the merge window opens

Re: [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

Hello everyone, On 29/04/13 15:30, Otavio Salvador wrote: Hello Marek, (adding Kiril in Cc as he been quite friendly in testing U-Boot in OlinuXino) Per Otavio's instructions: * checked out git://git.denx.de/u-boot-imx.git, branch master * applied http://pastebin.com/qub5fP1P (skips writi

Re: [U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration

Hello Marek, (adding Kiril in Cc as he been quite friendly in testing U-Boot in OlinuXino) On Sun, Apr 28, 2013 at 9:17 PM, Marek Vasut wrote: > The VDDMEM ramped up in very weird way as it was horribly misconfigured. > Instead of setting up VDDMEM in one swipe, let it rise slowly the same > way

Re: [U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure

> From: Gabbasov, Andrew > Sent: Monday, April 29, 2013 13:34 > To: u-boot@lists.denx.de > Subject: [U-Boot][PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry > structure > > Packed structure cfi_qry contains unaligned 16- and 32-bits members, > accessing which causes problems when cfi_fla

Re: [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned accesses

> From: Marek Vasut [marek.va...@gmail.com] > Sent: Sunday, April 28, 2013 22:58 > To: u-boot@lists.denx.de > Cc: Gabbasov, Andrew; Albert ARIBAUD; Tom Rini > Subject: Re: [U-Boot] [PATCH] ARM: cfi_flash: Avoid generation of unaligned > accesses > > Dear Andrew Gabbasov, > > > Packed structure c

[U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure

Packed structure cfi_qry contains unaligned 16- and 32-bits members, accessing which causes problems when cfi_flash driver is compiled with -munaligned-access option: flash initialization hangs, probably due to data error. This fix converts 16- and 32-bit members to byte arrays and uses special ma

[U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114

Tegra30 and Tegra114 are compatible except 1. T30 takes 55 ms to finish Port Reset. T114 takes 50 ms. 2. PLL parameters Tested on Tegra20 Harmony/Seaboard, Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin --- arch/arm/include/asm/arch-tegra/clk_rst.h |

[U-Boot] [PATCH 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function

Add USB EHCI, storage and network support. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin --- include/configs/cardhu.h | 14 ++ include/configs/dalmore.h | 14 ++ include/configs/tegra114-common.h |

[U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114

Add DT node for USB function. Signed-off-by: Jim Lin --- arch/arm/dts/tegra114.dtsi| 105 arch/arm/dts/tegra20.dtsi | 81 arch/arm/dts/tegra30.dtsi | 108 + board/nvi

[U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support

Tegra114 USB EHCI is compatible with Tegra30 USB EHCI except: 1. Port Reset - Tegra30 takes 55ms, Tegra114 takes 50 ms to finish. 2. PLL parameters. Jim Lin (3): ARM: Tegra: FDT: Add USB support for T20/T30/T114 ARM: Tegra: USB: Add driver support for Tegra30/Tegra114 Tegra: Config: Enable T

Re: [U-Boot] u-boot UBI support

"Paul B. Henson" writes: > I'm trying to get u-boot to read from a ubifs volume on an mx28evk > board, and failing :(. [...] > MX28EVK U-Boot > ubifsmount recovery > > UBIFS error (pid 0): ubifs_get_sb: cannot open "recovery", error -22 > UBIFS error (pid 0): ubifs_mount: Error reading superbloc

[U-Boot] u-boot was skipped: because UBOOT_MACHINE is not set

Hi all, I am trying to build a bitbake target for my RobOvero board.I get this following error: "*ERROR: u-boot was skipped: because UBOOT_MACHINE is not set*" How do I set values and build uboot for Overo Series RobOvero board(PCB 30019

Re: [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO

On 04/27/2013 05:45 PM, Simon Glass wrote: > Hi Michal, > > On Wed, Apr 24, 2013 at 1:27 AM, Michal Simek wrote: >> Microblaze uses gpio which is connected to the system reset. >> Currently gpio subsystem wasn't used for it. >> >> Add gpio driver and change Microblaze reset logic to be done >> vi

Re: [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze

On 04/27/2013 05:35 PM, Simon Glass wrote: > Hi Michal, > > On Wed, Apr 24, 2013 at 1:30 AM, Michal Simek wrote: >> Hi Simon, >> >> here is also one small problem if you want to use patman just for one patch >> then cover letter contains 0/1 but patch itself doesn't contain 1/1. >> >> I think wil