Mpq101 is a RapidIO development board in AMC form factor, featuring MPC8548
processor, 512MB of hardwired DDR2 RAM, 128MB of hardwired NAND flash
memory, real time clock and additional serial EEPROM on i2c bus (enabled).
USB controller is available, but not presently enabled.
Additional board info
Hi ,
Here goes my bootargs ..bootargs=noinitrd root=/dev/mtdblock2 init=/linuxrc
console=ttySAC0.
>From the exception, I was able to understand that a data abort
>has occurred and my is stopping at 30008010 address. But I was not able
>to locate this address in System.map. My System.map star
Hi ,
I am getting an exception once I try to boot the image with bootm command.
Boardcon> bootm 30008000
## Booting image at 30008000 ...
Image Name:
Created: 2011-01-07 6:04:55 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3035360 Bytes = 2.9 MB
Dear Aneesh V,
On 27 December 2010 20:22, Aneesh V wrote:
> Dear Minkyu Kang,
>
> On Monday 27 December 2010 12:55 PM, Minkyu Kang wrote:
> < snip >
>>>
>>> +
>>> +#ifndef CONFIG_SYS_NO_DCACHE
>>> +void v7_setup_outer_cache_ops(void)
>>> +{
>>> +#ifndef CONFIG_L2_OFF
>>> + v7_outer_cache.en
Hi ,
I am trying to put uncompressed kernel image to SDRAM for my s3c2440
development board. The uncompressed kernel image is made from 'Image' inside
arch/arm/boot folder using the mkimage tool.
What should be the entry point and load address for the uncompressed kernel
image ?
The physical
On Wednesday, January 05, 2011 20:23:54 Nobuhiro Iwamatsu wrote:
> --- a/arch/i386/config.mk
> +++ b/arch/i386/config.mk
> @@ -35,5 +35,6 @@ PLATFORM_CPPFLAGS += $(call cc-option,
> -fno-stack-protector) PLATFORM_CPPFLAGS += $(call cc-option,
> -mpreferred-stack-boundary=2) PLATFORM_CPPFLAGS += -DC
Hi,when i upgrade uboot from 1.1.2 to v2010.12-rc3
i met a great number of problems.
Before, i use skyeye to simulate uboot.
furthermore i use "arm-linux-gdb u-boot"(eldk-4.2) to step by step executes
u-boot
the result like below:
(gdb) tar remote :12345
Remote debugging using :12345
_start () at
On Thu, Jan 6, 2011 at 4:56 PM, Scott Wood wrote:
> Commit 5a442c0addc69d0c4b58e98e5aec1cf07576debb switched NAND
> (among other things) from explicitly checking autostart for "yes"
> to using getenv_yesno().
this has been discussed twice so far on the list. Wolfgang plans on
reverting it at some
On Thu, Jan 06, 2011 at 09:48:18AM +0800, Lei Wen wrote:
> This patch sync with David's patch on Linux for handling nand_scan_ident.
>
> commit 5e81e88a4c140586d9212999cea683bcd66a15c6
> Author: David Woodhouse
> Date: Fri Feb 26 18:32:56 2010 +
>
> mtd: nand: Allow
Commit 5a442c0addc69d0c4b58e98e5aec1cf07576debb switched NAND
(among other things) from explicitly checking autostart for "yes"
to using getenv_yesno().
Instead of checking for "yes", getenv_yesno() checks for "no", and assumes
"yes" if it can't find anything. This changes the default behavior, w
SunnyVision Cloud Server雲端伺服器
To view it online, please go here:
http://sv-edm-001.hkcolocation.com/emailmarketer/display.php?M=328181&C=d90bfe70658c39d20abe5d82c7c12bdc&S=57&L=38&N=24
Advantages of Cloud Server 雲端伺服器服務優勢
Cloud Server provides you with the same function as a traditional
dedicated
[[PATCH 15/15] powerpc/85xx: Rework SBC8548 pci_init_board to use common FSL
PCIe code] On 17/12/2010 (Fri 17:50) Kumar Gala wrote:
> Remove duplicated code in SBC8548 board and utliize the common
> fsl_pcie_init_board(). We also now dynamically setup the LAWs for PCI
> controllers based on whic
Your email address has made you a winner of 11,000,000 USD, Contact our
Agent Mr. Datson Galleon via: e-mail,
datsongall...@bigstring.com, Tel: +1404-566-0625 for immediate
response/details.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.
[[PATCH 7/7] powerpc/86xx: Convert SBC8641 to use common SRIO init code] On
06/01/2011 (Thu 10:58) Kumar Gala wrote:
> Signed-off-by: Kumar Gala
> CC: Paul Gortmaker
Tested in conjuntion with the mpc85xx dev branch and Peter's patch.
For some reason flash erase doesn't work, but I'm guessing
On Tue, Dec 28, 2010 at 6:47 PM, Peter Tyser wrote:
> This change does the following:
> - Adds printing of negotiated link width. This information can be
> useful when debugging PCIe issues.
> - Makes it optional for boards to implement board_serdes_name().
> Previously boards that did not impl
From: Li Yang
The P2020 has 2 SRIO ports and they are useable on the P2020 DS board.
Enable them using the common SRIO init code.
Signed-off-by: Li Yang
Signed-off-by: Kumar Gala
---
include/configs/P2020DS.h | 24 +++-
1 files changed, 23 insertions(+), 1 deletions(-)
Signed-off-by: Kumar Gala
CC: Paul Gortmaker
---
board/sbc8641d/law.c |1 -
include/configs/sbc8641d.h | 15 +--
2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
index a6f60ee..14259d6 100644
--- a/board/sbc8641d/l
Signed-off-by: Kumar Gala
---
board/freescale/mpc8641hpcn/law.c |5 +
include/configs/MPC8641HPCN.h | 30 +-
2 files changed, 14 insertions(+), 21 deletions(-)
diff --git a/board/freescale/mpc8641hpcn/law.c
b/board/freescale/mpc8641hpcn/law.c
index 30a7
Add the needed defines and code to utilize the common 8xxx srio init
code to setup LAWs and modify device tree if we have SRIO enabled on a
board.
Signed-off-by: Kumar Gala
---
arch/powerpc/cpu/mpc86xx/fdt.c|9 -
arch/powerpc/include/asm/immap_86xx.h |4 +++-
2 files chan
Signed-off-by: Kumar Gala
---
board/freescale/mpc8569mds/law.c |3 +--
include/configs/MPC8569MDS.h | 12
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/freescale/mpc8569mds/law.c b/board/freescale/mpc8569mds/law.c
index bcd0311..4f4a93b 100644
--- a/b
Moved the SRIO init out of corenet_ds and into common code for
8xxx/QorIQ processors that have SRIO. We mimic what we do with PCIe
controllers for SRIO.
We utilize the fact that SRIO is over serdes to determine if its
configured or not and thus can setup the LAWs needed for it dynamically.
We ad
Signed-off-by: Kumar Gala
---
board/freescale/mpc8568mds/law.c |3 +--
include/configs/MPC8568MDS.h | 12
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
index e24b72b..c5cf7ba 100644
--- a/b
Signed-off-by: Kumar Gala
---
board/freescale/mpc8548cds/law.c |5 +
board/freescale/mpc8548cds/tlb.c |9 -
include/configs/MPC8548CDS.h | 15 ---
3 files changed, 13 insertions(+), 16 deletions(-)
diff --git a/board/freescale/mpc8548cds/law.c b/board/freesc
Remove duplicated code in corenet_ds boards and utilize the common
fsl_pcie_init_board().
Signed-off-by: Kumar Gala
---
board/freescale/corenet_ds/pci.c | 118 +-
1 files changed, 2 insertions(+), 116 deletions(-)
diff --git a/board/freescale/corenet_ds/pci.
On Jan 5, 2011, at 10:39 AM, Kumar Gala wrote:
> We set the L1 dache register with a bogus register value. Need to be
> using 'r3' instead of 'r0'.
>
> Reported-by: John Traill
> Signed-off-by: Kumar Gala
> ---
> arch/powerpc/cpu/mpc85xx/start.S |4 ++--
> 1 files changed, 2 insertions(+),
On Dec 17, 2010, at 5:33 PM, Kumar Gala wrote:
> Now that we have serdes support for all 85xx/86xx/Pxxx chips we can
> replace the is_fsl_pci_cfg() code with the is_serdes_configured().
>
> Signed-off-by: Kumar Gala
> ---
> arch/powerpc/cpu/mpc8xxx/Makefile |1 -
> arch/powerpc/cpu/m
> -Original Message-
> From: Lei Wen [mailto:adrian.w...@gmail.com]
> Sent: Thursday, January 06, 2011 8:59 AM
> To: Prafulla Wadaskar
> Cc: Lei Wen; u-boot@lists.denx.de; Yu Tang; Ashish Karkare; Prabhanjan
> Sarnaik
> Subject: Re: [U-BOOT] [PATCH 2/6] mv: seperate kirkwood and mmp from
Hi ,
What is the value of -a , -e argument for creating the initrd image on s3c2440.
The base address of my RAM is 0x3000 and the kernel (zImage) is loaded to
to 0x30008000. The total RAM size is 64 MB. I am uisng uboot version 1.1.6 and
linux kernel 2.6.30.4.
thanks & regardsGIGIN
__
1. ftpmu010.h: fix and add definitions
Enhanced for more features and asm related support
according to datasheet.
Note:
- FTPMU010_PDLLCR0_HCLKOUTDIS is "incorrect" in datasheet.
- FTPMU010_PDLLCR0_DLLFRANG is only 1 bit at bit #19. (not 20-19)
- FTPMU010_PDLLCR0_HCLKOUTDIS is
Dear concerned,
>> Use the global data instead of bss variable, replace as follow.
>> timer_load_val -> timer_rate_hz
>> timestamp -> timer_reset_value
I am not too happy about this "misuse" of gd->variables making them
"misnomers" and the code harder to read.
timer_rate_hz is
Dear seedshope,
On 6 January 2011 00:57, seedshope wrote:
> On 01/05/2011 03:04 PM, Minkyu Kang wrote:
>>
>> Dear seedshope,
>>
>> On 4 January 2011 23:56, seedshope wrote:
>>>
>>> On 01/04/2011 10:46 PM, seedshope wrote:
On 01/04/2011 04:14 PM, Minkyu Kang wrote:
>
> Use the g
31 matches
Mail list logo
