[U-Boot] [PATCH-V2 6/9] Add support for Freescale MX25 SOC

ARM926EJS core with MX31 peripherals. Signed-off-by: John Rigby Earlier Version Signed-off-by: Wolfgang Denk CC: Fred Fan CC: Tom --- cpu/arm926ejs/mx25/Makefile | 46 cpu/arm926ejs/mx25/generic.c | 263 +++ cpu/arm926ejs/mx25/reset.c

[U-Boot] [PATCH-V2 8/9] env_nand.c: print error message and fail gracefully

From: Wolfgang Denk env_nand.c would crash silently if a malloc() for the environment buffers failed; make it print an error message and fail gracefully, i. e. use the default environment then. Signed-off-by: Wolfgang Denk Acked-by: John Rigby --- common/env_nand.c |7 +++ 1 files cha

[U-Boot] [PATCH-V2 9/9] Add support for KARO TX25 board

This is an i.MX25 base board with only NAND so it uses nand_spl to boot. Signed-off-by: John Rigby Tune configuration, add support for (redundant) environment in NAND. Signed-off-by: Wolfgang Denk Acked-by: Wolfgang Denk CC: Fred Fan CC: Tom --- MAINTAINERS |4 +

[U-Boot] [PATCH-V2 7/9] fec_mxc: add MX25 support

Use RMII for MX25 Add code to init gasket that enables RMII Signed-off-by: John Rigby --- drivers/net/fec_mxc.c | 31 ++- drivers/net/fec_mxc.h | 32 ++-- include/asm-arm/arch-mx25/clock.h |1 + 3 files chang

[U-Boot] [PATCH-V2 5/9] fec_mxc: cleanup and factor out MX27 dependencies

general cleanup move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c make MX27 specific phy init conditional on CONFIG_MX27 replace call to imx_get_ahbclk with one to imx_get_fecclk and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h Signed-off-by: John Rigby CC: Ben Warren

[U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support

Add support for version 1.1 of the nfc nand flash controller which is on the i.mx25 soc. Use CONFIG_NAND_MXC_V1 and CONFIG_NAND_MXC_V1_1 to differentiate between the two supported versions. Add a define CONFIG_NAND_MXC_V1 to imx27lite board config. Also factor out some soc specific nand geometry

[U-Boot] [PATCH-V2 3/9] Add MX25 support to nand_spl fsl nfc driver

MX25 has a different version of the fsl_nfc flash controller known as version 1.1. Add support to the nand_spl fsl_nfc driver keyed off CONFIG_NAND_NFC_V1_1. Also add a define CONFIG_NAND_NFC_V1 to the only existing user configs/mx31pdk.h. Versioning differs from mainline mxc kernel driver no co

[U-Boot] [PATCH-V2 2/9] arm926ejs: add nand_spl boot support

Add CONFIG_PRELOADER/CONFIG_NAND_SPL support for nand booting to arm926ejs/start.S This is derived from CONFIG_PRELOADER support in arm1136/start.S Signed-off-by: John Rigby --- cpu/arm926ejs/start.S | 42 +- 1 files changed, 41 insertions(+), 1 deletio

[U-Boot] [PATCH-V2 1/9] mxc_serial replace platform specific clock

remove ifdef'd clock selection code from serial_mxc.c and replace with call to imx_get_uartclk Add definitions for imx_get_uartclk to imx31 and imx27 include files. This makes it easier to add new imx platforms. Signed-off-by: John Rigby --- drivers/serial/serial_mxc.c |6 +- inc

[U-Boot] [PATCH-V2 0/9] Add support for i.MX25 SOC and TX25 board

Changes since first series: 0001-mxc_serial-replace-platform-specific-clock.patch 0002-arm926ejs-add-nand_spl-boot-support.patch no changes 0003-Add-MX25-support-to-nand_spl-fsl-nfc-driver.patch changed commit message from Add-V1.1.. to Add-MX25... included Scott's suggested changes

Re: [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching

Khasim Syed Mohammed wrote: > From 9045377f255e8a59450a6957e63366b4963281ae Mon Sep 17 00:00:00 2001 > From: Syed Mohammed Khasim > Date: Fri, 8 Jan 2010 20:20:41 +0530 > Subject: [PATCH] Enable I2C bus switching > > OMAP3 supports Multiple I2C channels, this patch allows > us to use i2c dev com

Re: [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection

Khasim Syed Mohammed wrote: > From 15fbe5ff9ee2fd2f8da4c16805d6c7ccf7244bae Mon Sep 17 00:00:00 2001 > From: Syed Mohammed Khasim > Date: Fri, 8 Jan 2010 20:13:47 +0530 > Subject: [PATCH] OMAP3 Beagle Update revision detection > > MUX_BEAGLE(); > > - if (beagle_revision_c) { > +

Re: [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4

Khasim Syed Mohammed wrote: > From c8d47f8b064329676a0f04cff95eef05fe7f24ba Mon Sep 17 00:00:00 2001 > From: Syed Mohammed Khasim > Date: Wed, 13 Jan 2010 00:26:17 +0530 > Subject: [PATCH] Add 720Mhz support for Beagle Rev C4 > > Use the Generic TWL and Clock APIs to get beagle > Rev C4 running a

Re: [U-Boot] [U-boot] [PATCH] Support for the Calao USB-A9260/USB-A9G20 boards

Gregory Hermant wrote: > The Calao USB-A9260 and USB-9G20 boards are manufactured and sold by Calao > Systems > . They are built around an AT91SAM9260 ARM SoC > running at 180MHz and an AT91SAM9G20 ARM SoC running at 400MHz respectively. > They feature an Ethernet por

Re: [U-Boot] [PATCH 5/8 V2 Part 1/3] add at91 SoC access with c structures

Sorry should named [PATCH 5/8 V2 Part 2/3] add at91 SoC access with c structures ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 5/8 V2 Part 2/3] add at91 SoC access with c structures

* insert AT91 SoC access using c-stuctures Signed-off-by: Jens Scharsig --- diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 98d90f2..274a135 100644 --- a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/cpu/arm926ejs/at91/at91sam9m10

[U-Boot] [PATCH 8/8 V2] add at91 SoC access with c structures

* add's support for new board eb_cpux9k2 * demonstrates, how to integrate at91rm9200 boards into at91 arch Signed-off-by: Jens Scharsig --- MAKEALL|3 + Makefile |3 + board/BuS/eb_cpux9k2/Makefile | 51 + board/BuS/eb_cpux9k2/config.

[U-Boot] [PATCH 7/8 V2] add at91 SoC access with c structures

* add new at91_emac driver * using c structure SoC access * supports NET_MULTI for AT91RM9200 Signed-off-by: Jens Scharsig --- drivers/net/at91_emac.c | 498 +++ 1 files changed, 498 insertions(+), 0 deletions(-) create mode 100644 drivers/net/at9

[U-Boot] [PATCH 6/8 V2] add at91 SoC access with c structures

* add new at91_gpio driver, using c structure SoC access Signed-off-by: Jens Scharsig --- drivers/gpio/at91_gpio.c | 240 ++ 1 files changed, 240 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/at91_gpio.c diff --git a/drivers/gpio/a

[U-Boot] [PATCH 5/8 V2 Part 3/3] add at91 SoC access with c structures

* insert AT91 SoC access using c-stuctures Signed-off-by: Jens Scharsig --- diff --git a/include/asm-arm/arch-at91/at91sam9g45.h b/include/asm-arm/arch-at91/at91sam9g45.h index 0feed9c..78c0b16 100644 --- a/include/asm-arm/arch-at91/at91sam9g45.h +++ b/include/asm-arm/arch-at91/at91sam9g45.h @@

[U-Boot] [PATCH 5/8 V2 Part 1/3] add at91 SoC access with c structures

* insert AT91 SoC access using c-stuctures Signed-off-by: Jens Scharsig --- diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 98d90f2..274a135 100644 --- a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/cpu/arm926ejs/at91/at91sam9m10

[U-Boot] [PATCH 5/8 V2 Part 1/3] add at91 SoC access with c structures

* insert AT91 SoC access using c-stuctures Signed-off-by: Jens Scharsig --- board/atmel/at91sam9263ek/at91sam9263ek.c | 146 +- board/atmel/at91sam9263ek/led.c |9 +- cpu/arm926ejs/at91/at91cap9_devices.c | 88 --- cpu/arm926ejs/at9

[U-Boot] [PATCH 4/8 V2] add at91 SoC access with c structures

* prepare AT91RM9200 arch for SoC access update Signed-off-by: Jens Scharsig --- cpu/arm920t/at91rm9200/bcm5221.c |4 ++-- cpu/arm920t/at91rm9200/dm9161.c |3 +-- cpu/arm920t/at91rm9200/timer.c |1 - cpu/arm920t/cpu.c

[U-Boot] [PATCH 3/8 V2] add at91 SoC access with c structures

* add new hardware header files for at91 emac, matrix, mc, pdc, st and tc controller * add at91rm9200 definitions, need for join at91rm9200 into at91 arch Signed-off-by: Jens Scharsig --- include/asm-arm/arch-at91/at91_emac.h | 145 +++ include/asm-arm/arch-at91/

[U-Boot] [PATCH 2/8 V2] add at91 SoC access with c structures

* add at91 soc to arm920t, needs to join at91rm9200 into at91 arch Signed-off-by: Jens Scharsig --- cpu/arm920t/at91/Makefile| 47 ++ cpu/arm920t/at91/lowlevel_init.S | 177 ++ cpu/arm920t/at91/reset.c | 58 cpu/arm92

[U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures

* prepare board config files for Soc access update Signed-off-by: Jens Scharsig --- include/configs/afeb9260.h |4 ++ include/configs/at91cap9adk.h |4 ++ include/configs/at91rm9200dk.h | 13 - include/configs/at91rm9200ek.h | 11 - include/configs/at91sa

Re: [U-Boot] [PATCH] Add support for jadecpu board

Dear Matthias Weisser, In message <4b5210ea.8000...@windriver.com> Tom Rix wrote: > > > index ed6156f..98c147d 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -2874,6 +2874,13 @@ TNY_A9260_config : unconfig > > @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h > >

Re: [U-Boot] [Patch 5/8 Part2/3 V2] add at91 SoC access with c structures

Jens Scharsig wrote: > Am 2010-01-16 16:18, schrieb Tom: >> Where are the other patches ? >> Is this a pending patchset ? >> Tom > > Hello Tom > > sorry about the confusions. > > The V2 change is described in > http://lists.denx.de/pipermail/u-boot/2010-January/066408.html > > so only the [Patc

Re: [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board

Vipin Kumar wrote: > On Sat, Jan 16, 2010 at 8:40 PM, Tom wrote: >> Vipin Kumar wrote: >>> Hello Tom, >>> >> >> >> +#include >> +#include >> +#include >> + >> +int board_init(void) >> +{ >> +return spear_board_init(MACH_TYPE_SPEAR300); >> Does this n

Re: [U-Boot] [PATCH] Add support for jadecpu board

Matthias Weisser wrote: > Signed-off-by: Matthias Weisser > --- > MAINTAINERS |4 + > MAKEALL |1 + > index ed6156f..98c147d 100644 > --- a/Makefile > +++ b/Makefile > @@ -2874,6 +2874,13 @@ TNY_A9260_config : unconfig >

Re: [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board

On Sat, Jan 16, 2010 at 8:40 PM, Tom wrote: > Vipin Kumar wrote: >> >> Hello Tom, >> > > > +#include > +#include > +#include > + > +int board_init(void) > +{ > +    return spear_board_init(MACH_TYPE_SPEAR300); > Does this need a new mach type ? > I s

Re: [U-Boot] [Patch 5/8 Part2/3 V2] add at91 SoC access with c structures

Am 2010-01-16 16:18, schrieb Tom: > Where are the other patches ? > Is this a pending patchset ? > Tom Hello Tom sorry about the confusions. The V2 change is described in http://lists.denx.de/pipermail/u-boot/2010-January/066408.html so only the [Patch 5/8 Part2/3] is effected. Thats the reason

Re: [U-Boot] [PATCH] Adding new vendor logo

Matthias Weisser wrote: > Signed-off-by: Matthias Weisser > --- > tools/Makefile |3 +++ > tools/logos/syteco.bmp | Bin 0 -> 12278 bytes > 2 files changed, 3 insertions(+), 0 deletions(-) > create mode 100644 tools/logos/syteco.bmp > > diff --git a/tools/Makefile b/tools/Makefile

Re: [U-Boot] [PATCH] Add support for Jade display controller

Matthias Weisser wrote: > Signed-off-by: Matthias Weisser > --- > drivers/video/Makefile |1 + > drivers/video/cfb_console.c |2 +- > drivers/video/jadegdc.c | 193 > +++ > 3 files changed, 195 insertions(+), 1 deletions(-) > create mode

Re: [U-Boot] Adding support for MB86R01

Matthias Weisser wrote: > This patchset adds support for the MB86R01 'Jade' SoC from Fujitsu. It > is based on a ARM926EJS core. > Please in the future use git format-patch -n This will number the patch set. Tom > ___ > U-Boot mailing list > U-Boot@lis

Re: [U-Boot] [PATCH] Add support for MB86R01 from Fujitsu

Matthias Weisser wrote: > Signed-off-by: Matthias Weisser > --- > common/serial.c |3 +- > cpu/arm926ejs/jade/Makefile | 47 + > cpu/arm926ejs/jade/reset.c | 37 > cpu/arm926ejs/jade/timer.c | 127

Re: [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board

Vipin Kumar wrote: > Hello Tom, > +#include +#include +#include + +int board_init(void) +{ +return spear_board_init(MACH_TYPE_SPEAR300); Does this need a new mach type ? I see there isn't a SPEAR310 define in mach-types. >>> Actually,

Re: [U-Boot] U-Boot Crashes with Dumps

Hi Wolfgnag, I am apologize for debugging with by passing the previous exception. I was curious about u-boot prompt. Now i have implemented the steps suggested by stefan, and debugging the same. ~Anup On Thu, Jan 14, 2010 at 3:45 PM, Wolfgang Denk wrote: > Dear anupbeh...@gmail.com, > > In me

Re: [U-Boot] U-Boot Crashes with Dumps

Thanks Stenfan for your valuable inputs. I have implemented the code suggested by you after completing the ddr initialization : #if defined(CONFIG_DDR_DATA_EYE) /* * Running denali_core_search_data_eye() when ECC is enabled * causes non-ECC machine c