hi all,
I got a problem that I cannot fix,when I am trying to compile uboot1.3.4 for my
processer s3c2440.
===
r...@john-desktop:/home/john/u-boot-1.3.4 # /usr/local/arm/3.3.2/bin/arm-linux-
ar: libyt2440.a File format not recognized
I'm implementing a rather complex boot that involves flags and counters
in EEPROM.
This is to detect multiple boot failures and to then revert to a
previous Linux kernel and sysroot.
The Hush shell and applications almost support this by using scripts
(even autoscripting), but not quite.
"ee
We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
for this mode. This command changes PMB for using 512MB system memory.
Signed-off-by: Yoshihiro Shimoda
---
changelog:
[v2] Update README.sh7785lcr for 32-Bit Extended Address Mode
Makefile
Signed-off-by: Yoshihiro Shimoda
---
changelog:
[v2] Add some defines for 32-Bit Address Extended Mode
include/asm-sh/cpu_sh4.h | 25 +
1 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h
index d2dbfcd..
On Sat, Feb 28, 2009 at 11:20 PM, Wolfgang Denk wrote:
> Dear Kyungmin Park,
>
> In message <20090227085736.ga5...@july> you wrote:
>> Some program such as UBI only used the mtdpart only.
>> however current jffs2 cmdline has dependent with jffs2 cmd
>> This patch make a build only jffs2 cmdline wi
Support for single binary image for NAND/OneNAND based OMAP3 EVM
boards. The software has to set the flag CONFIG_ENV_IS_RUNTIME_SEL
in include/configs/omap3_evm.h. The software is able to detect
whether it is NAND or OneNAND flash at runtime. The flash
detected is set as the environment store also.
Example binaries to be downloaded to 0x8030 for OMAP3 EVMs.
Signed-off-by: Manikandan Pillai
---
examples/Makefile |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/examples/Makefile b/examples/Makefile
index dbcfa92..75e6c87 100644
--- a/examples/Makefile
+++ b/exa
Andre Schwarz wrote:
> Kumar Gala schrieb:
>> On Dec 9, 2008, at 12:01 PM, Andre Schwarz wrote:
>>
>>> Jon Loeliger schrieb:
On Mon, 2008-12-08 at 18:02 +0100, Andre Schwarz wrote:
> Kim,
>
> I'd like to change my DDR setup code since it looks like my computed
> values are
The eth_halt() function has been modified to remove the
chip reset and instead stop the transmit/receive from the device.
Signed-off-by: Manikandan Pillai
---
drivers/net/smc911x.c | 23 ++-
1 files changed, 22 insertions(+), 1 deletions(-)
diff --git a/drivers/net/smc911x
OneNAND IPL has common codes for RAM init, load data, and jump to 2nd
bootloader, but it's common code used about 300~400 bytes. So board
specific codes, such as lowlevel_init, can't has enough code. It make
a difficult to implement OneNAND IPL.
his patch make this common code as small as possible
Hi Guys,
I am using u-boot 2009.03-rc1 and a board based on Coldfire MC5271EVB eval
platform.
Our external watchdog is a MAX6369.
I have #define CONFIG_HW_WATCHDOG and #undef CONFIG_WATCHDOG in our board's
config file and
have created the hw_watchdog_reset function to toggle the WDI line to pet
On Sun, Feb 22, 2009 at 01:00:10AM +0100, Wolfgang Denk wrote:
> Dear Scott,
>
> I have the following patches still marked as open in my list. Could
> you please have a look...
Sorry for the delay; I had no e-mail access last week.
> NAND-FLASH:
> 11/04 John Rigby [U-Boot] [PATCH v3] Fr
Hi,
I see most of the POST tests relate to the PPC family. Is there a set of
post tests based on the Atmel ARM9 family?
Another related question: Is it assumed that POST runs before relocation or
can some run after relocation? I would think that after you test memory
before relocation, then it wo
Hello All,
I am using DM6446 (TI DaVinci) customized board.
1. I am not able to understand meaning of NAND Sub system U boot commands, e.g.
nand write, nand read, nand erase etc.
2. I want to use the NAND sub system U boot command in Linux (ARM side of
DM6446 core), is it possible ? may be some
Afzal Nadirshah wrote:
> > Hi,
> >I am trying to bring linux up on our custom board, by loading the
> > kernel.img , canynlands.dtb and Ramdisk onto the RAM using the serial port.
> >However the boot process is getting hung. The boot boot process
> > stops after the following mes
Hi,
I am trying to bring linux up on our custom board, by loading the
kernel.img , canynlands.dtb and Ramdisk onto the RAM using the serial port.
However the boot process is getting hung. The boot boot process stops
after the following messages :
=> run flash_self
## Booting
Stefan Roese wrote:
> On Monday 02 March 2009, Felix Radensky wrote:
>
>>> Also, I've compared the values of SDR0_SDSTP0-SDR0_SDSTP3 registers in
>>> bootstrap options C and H
>>> and didn't find anything suspicious. There are differences in various
>>> divisor values, but that is expected.
>>>
On Monday 02 March 2009, Felix Radensky wrote:
> > Also, I've compared the values of SDR0_SDSTP0-SDR0_SDSTP3 registers in
> > bootstrap options C and H
> > and didn't find anything suspicious. There are differences in various
> > divisor values, but that is expected.
> > Tested with u-boot 2009.03-
Felix Radensky wrote:
> Stefan Roese wrote:
>
>> On Tuesday 17 February 2009, Felix Radensky wrote:
>>
>>
> 2. Another problem is that in bootstrap configuration B (CPU - 333 Mhz,
> PLB 166MHz)
> PCI-E cards are not recognized in any slot. This happens with all
> u-bo
Hello Wolfgang,
The following changes since commit 00cc5595a7caac8066b408774383a956c2e26797:
Anatolij Gustschin (1):
lcd: Fix compilation warning in common/lcd.c
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Heiko Schocher (1):
i2c, dtt: move
Hello Heiko,
Heiko Schocher wrote:
> it is not necessary to init the DTTs so early,
> so move this init to board_init_r ().
>
> Signed-off-by: Heiko Schocher
Applied to u-boot-i2c.git
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office:
21 matches
Mail list logo
