Hi,
I overhauled drivers/net/ax88796.h a bit to make some more settings
board-dependend that used to be hard-coded.
There is also a new settings block for the chip to be used on the
Colibri PXA300 board.
Signed-off-by: Daniel Mack <[EMAIL PROTECTED]>
diff --git a/drivers/net/ax88796.h b/driver
Hi,
this patch adds support for Toradex' "Colibri PXA300" module. I had to
modify the AX88796 driver a bit to make it work, but that goes in a
different patch.
Also, the board code does not support NAND yet. I'll implement the code
from Oliver Ford soon.
Signed-off-by: Daniel Mack <[EMAIL PROTEC
Hi Oliver,
On Sat, Nov 29, 2008 at 02:03:25PM +, Oliver Ford wrote:
> I've recently started trying to use U-boot on an iPAQ 214 which runs on
> a PXA310 cpu.
> I've got the basic boot up, NAND flash and MMC systems working so far.
>
> I originally tried to use the zylonite's nand.c that's al
Hi,
I've recently started trying to use U-boot on an iPAQ 214 which runs on
a PXA310 cpu.
I've got the basic boot up, NAND flash and MMC systems working so far.
I originally tried to use the zylonite's nand.c that's already in u-boot
but it was very flaky and didn't support several things I nee
Hello UBOOT mailinglist
I have encountered a problem when i try to compile any newer version of UBOOT
than V1.2.0 for AT91RM9200,
below is given the output from console when i try to compile the UBOOT V1.3.4
for AT91RM9200,
could anybody please give me a hint what a solution to this problem
Hi Ben,
On Fri, Nov 28, 2008 at 09:27:37PM -0800, Ben Warren wrote:
> > the board I'm currently working on has an ASIX AX88796 NE2000 clone but
> > no EEPROM attached to it. Hence, the get_prom() routine returns zeros
> > only so the system won't work.
> >
> > This patch takes the MAC address give
Hi
2008/11/29 user <[EMAIL PROTECTED]>:
> nand booting support (SPL) for phyCORE-i.MX31
>
> This patch allows Phytec phyCORE-i.MX31 based system to boot from embed
> NAND-flash memory.It not add support for NAND cmd and/or driver for U-BOOT,
> it is only SPL for U-BOOT. For NAND support in U-BOOT
Jerry Van Baren wrote:
> Daniel Mack wrote:
>
>>Hi,
>>
>>while digging thru the sources to find out why U-Boot won't start my
>>Linux kernel, I stumbled over lib_arm/bootm.c and its check for the falg
>>variable. I wonder how this ever worked as the condition is really heavy
>>to match unless BOOT
nand booting support (SPL) for phyCORE-i.MX31
This patch allows Phytec phyCORE-i.MX31 based system to boot from embed
NAND-flash memory.It not add support for NAND cmd and/or driver for U-BOOT,
it is only SPL for U-BOOT. For NAND support in U-BOOT I give refer to
Magnus Lilja's aug/2008 patch seri
9 matches
Mail list logo
