Hello Menno,
> As for the Telnet experiment: the controller that is on
> the other end of the line only supports TCP/IP; it's not a PC or
I meant not to communicate with the other end, just to see if connection
can be etablished from that machine to the device.
> back to 8. The only error that
AIL PROTECTED]
http://www.overbyte.be
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Friday, July 15, 2005 12:50 PM
Subject: Re: [twsocket] No connection with TCP/IP over VPN
> Thanks for the replies so far.
>
> I have sent a "debug" version of my
> s
Thanks for the replies so far.
I have sent a "debug" version of my
software to the guy using it (regretfull I can't access the VPN from
here ...) and he just returned me the result, which is not very
helpful.
When I issue a "CliSocket->Connect()", the state changes from
8 to 3 and after aprpo
Hello Menno,
To troubleshoot these steps to follow (not nececarly in sequence):
1. ping the host, if reply then route is ok
2. telnet to the host, if connect then TWSocket connect also
3. very importand: What's the winsock error ?
Because this will tell you what exacly is wrong etablishing the
c
uly 14, 2005 1:27 PM
Subject: [twsocket] No connection with TCP/IP over VPN
> I'm not very much into networking, so my question might be quite dumb.
>
> I have made a controller for a datalogging application that uses TCP/IP
> to allow the logged data to be transferred to a connec
2:27 PM
Subject: [twsocket] No connection with TCP/IP over VPN
> I'm not very much into networking, so my question might be quite dumb.
>
> I have made a controller for a datalogging application that uses TCP/IP
> to allow the logged data to be transferred to a connected computer. The
&
I'm not very much into networking, so my question might be quite dumb.
I have made a controller for a datalogging application that uses TCP/IP
to allow the logged data to be transferred to a connected computer. The
IP address of this controller is 192.168.2.10. To retrieve the data via
the loca
