What error number do you get in the OnSessionConnected event ? -- [EMAIL PROTECTED] Author of ICS (Internet Component Suite, freeware) Author of MidWare (Multi-tier framework, freeware) http://www.overbyte.be
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <twsocket@elists.org> Sent: Thursday, July 14, 2005 1:27 PM Subject: [twsocket] No connection with TCP/IP over VPN > I'm not very much into networking, so my question might be quite dumb. > > I have made a controller for a datalogging application that uses TCP/IP > to allow the logged data to be transferred to a connected computer. The > IP address of this controller is 192.168.2.10. To retrieve the data via > the local network, I have used the TWSocket component (cbuilder 1), set > the address to 192.168.2.10 (PC address 192.168.2.2), port to 10000 > (which is used to transfer the data) and this appears to work flawless. > > Now we try to get the data into a different network (IP 192.168.0.x) > using VPN, but TWSocket can't connect. The VPN connection is working > OK, and the controller responds to a PING from this network over the > VPN as well, but nothing happens with my TWSocket application. Port > 10000 is open on both ends of the network firewalls. Where should I > look for to troubleshoot this problem? > > Menno > > > > > -- > To unsubscribe or change your settings for TWSocket mailing list > please goto http://www.elists.org/mailman/listinfo/twsocket > Visit our website at http://www.overbyte.be > -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
