I got the same bug. I tried to report a bug with ubuntu-bug linux-
image-6.8.0-51-generic. After collecting the relevant information, it
got to "Uploading problem information" and reached the oddly specific
99.99070194034717% progress amount, then crashed with the following
error. It is reproducibl
y and installing the updated `debootstrap` package available
there fixed my issue:
peter@test-vm:~$ sudo grep proposed /etc/apt/sources.list
deb http://nl.archive.ubuntu.com/ubuntu focal-proposed main universe multiverse
peter@test-vm:~$ apt-cache policy debootstrap
debootstrap:
Installed: 1.0.118ubunt
I think this needs to be checked again - can break routers - may lock
users out and they need to drive to far locations to fix. May.
** Changed in: systemd (Ubuntu)
Status: Expired => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
I can confirm this.
I get you guys want to get rid of /etc/sysctl.conf - but unfortunately your
readme at:
/etc/sysctl.d/README.sysctl says this:
"""
If you want to set kernel variables
you can either edit /etc/sysctl.conf or make a new file.
"""
So I would at least change sysctl.conf to have a
As a workaround I can confirm - that creating a file in the directory
works. Hope it helps. Sorry for 3 separated message - I will try to go
over my brainfarts before posting from now on.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subs
Not like it matters - but this can cause some nasty surprise if happens during
an update - like routers stopping routing :)
I'm not sure if this change can happen by an apt upgrade or not - but if so -
you can break many routers with this update.
--
You received this bug notification because y
Unpacking: sssd (2.9.4-1.1ubuntu6.2) over (2.9.4-1.1ubuntu6.1)
Unpacking: python3-sss (2.9.4-1.1ubuntu6.2) over (2.9.4-1.1ubuntu6.1)
Unpacking: libsss-certmap0 (2.9.4-1.1ubuntu6.2) over (2.9.4-1.1ubuntu6.1)
Unpacking: sssd-proxy (2.9.4-1.1ubuntu6.2) over (2.9.4-1.1ubuntu6.1)
Unpacking: sssd-kr
I have the same problem, and the trigger was updating FortiClient from
version 7.2.5 to 7.2.6.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/2089930
Title:
Networ
Public bug reported:
freeze occurs only after a "suspend" I break out of it by restart with
hardware reset button or by
Ctrl-Alt-Del Even then, it takes an extra long time to return to the previous
session's screen
ProblemType: Bug
DistroRelease: Ubuntu 24.10
Package: xorg 1:7.7+23ubuntu3
P
I open one terminal window, then use + on top left to open a second. then on
the second one,
I pick detach. and it crashes (this is in 24.04.)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.la
After several hundred package updates over time this problem is no
longer occurring, I suspect that it was something buggy in the XML
library used by FotnConfig.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ub
** Also affects: vtk7
Importance: Undecided
Status: New
** No longer affects: vtk7
** Also affects: vtk7 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to expat in
VTK has been patched upstream to correctly handle AppendedData elements
in .vtu files with the updated/patched libexpat1:
https://gitlab.kitware.com/vtk/vtk/-/commit/db8f9efca220c9d16a30958e179abae3379d0011
https://gitlab.kitware.com/vtk/vtk/-/issues/19258
This will need backporting to older V
** Summary changed:
- ULLTS 22,24: FontConfig broken by including ".conf" file
+ ULTS 22,24: FontConfig broken by including ".conf" file
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ubuntu.
https://bugs.launc
** Also affects: fontconfig (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ubuntu.
https://bugs.launchpad.net/bugs/2061995
Title:
ULLTS 22,24: FontConfig b
Guten Tag!
Ich bin am 22.04.2024 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
Guten Tag!
Ich bin am 22.04.2024 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
On Jammy, the update from 2.4.7-1ubuntu0.2 to 2.4.7-1ubuntu0.3 causes
simialr XML not well formed (invalid token) errors for files which
contain binary data. Downgrading to 2.4.7-1 resolved the issue.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
still happening in ubuntu 22.04
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 22.04.4 LTS
Release:22.04
Codename: jammy
Feb 21 09:19:54 <> systemd[1]: Started ACPI Events Check.
Feb 21 09:19:54 <> systemd[1]: Started Process error reports
+1
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to whoopsie in Ubuntu.
https://bugs.launchpad.net/bugs/2018996
Title:
whoopsie uses 100% CPU indefinitely on chrome crash file
Status in whoopsie package in Ubuntu:
New
Bu
FYI This bug still exists (in Focal/Mantic made to use `devel`: `sudo
sed -i 's/focal/devel/g' /etc/apt/sources.list` -
https://discourse.ubuntu.com/t/ubuntu-as-rolling-release/14751/106).
Any alternatives or workarounds to get as close to "rolling release" as
possible, please?
--
You received t
Guten Tag!
Ich bin am 02.01.2024 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
Guten Tag!
Ich bin am 12.12.2023 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
Guten Tag!
Ich bin am 12.12.2023 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
Guten Tag!
Ich bin am 20.11.2023 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
Guten Tag!
Ich bin am 20.11.2023 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
In dringenden Fällen wenden Sie sich bitte an Markus Delorenzo:
+43-5232-2208-39
md(@)ruetz.at
Mit freundlichen Grüßen
Hans-Peter Schmidt
--
You received this bug notification because you
Same problem. Under Xorg, the Wacom tablet can move the pointer but as
soon as I tap to click, the system locks up. Pressing alt tab a few
times restores movement to the pointer. The Wacom is therefore unusable
under Xorg. Sadly, in GIMP it's also unusable under Wayland as the
pointers are invisibl
Guten Tag!
Ich bin am 30.10.2023 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
Mit freundlichen Grüssen
Hans-Peter Schmidt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https
Guten Tag!
Ich bin am 30.10.2023 wieder im Büro.
Ihre Nachricht wird NICHT automatisch weitergeleitet.
Mit freundlichen Grüssen
Hans-Peter Schmidt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https
** Changed in: winff (Ubuntu)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ibus in Ubuntu.
https://bugs.launchpad.net/bugs/1399945
Title:
Settings, Preferences, ect. - All key
this bug affects us too
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/2036427
Title:
Upgrade to version 249.11-0ubuntu3.10 breaks 12d1:15c1 Huawei ME906s
LTE M.2 Modul
gtk package dropped in 1.5.5-10
Please re-open if seen in the qt package
** Changed in: winff (Ubuntu)
Status: New => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ibus in Ubuntu.
https://bugs.launchpad
Or do you want me to record a video ?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/2025027
Title:
When I disconnect PC from LAN, I can't turn on Wi-Fi software-w
I do not think there can be anything more concrete.
I think I have followed everything prescribed (yes it is time consuming for me
to read all that tons of text, but do wonder - I did it..)
Now, if you guys do not have capacity to investigate, it'd be quite fair to
admit that, rather than tryin
I have to correct the information - currently even if I rebooted several
times, the option "Enable Wireless" is not available :-o
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpa
1. I boot my PC with LAN cable connected. Lan works, but I only see "Enable
networking" when I open the network manager options in the top right corner of
the screen. I guess, the "Enable Wireless" option is disabled deliberately,
while on LAN - which is not the best idea IMHO.
Can't screenshot
Public bug reported:
See my public question open here:
https://askubuntu.com/questions/1474771/wifi-control-gone-after-used-lan-cable-22-04-mate
I'd expect, to see the option "dis/enable wifi" at least when I disconnect from
LAN, (if not regardless on LAN connection).
But I can not see that opt
I am using systemd rather than upstart, but the bug is the same: cron
depends on remote-fs.target, autofs depends on remote-fs.target, so they
start together. The result is that the job is run with the working
directory set to /var/spool/cron.
What cron should be waiting for is home directories be
the fault is replaced by SO_PEERGROUPS.
This makes it immune to nss disappearing under its feet, though it is a slight
change in behaviour. When applying a policy, it will be the user's current
groups that count, rather than the groups they would get if they logged in now.
Peter
** Bug
nce count and sets d->policy to NULL. The second time
round, the reference count is decremented again, but policy is already
NULL from last time round, hence the crash.
I've included a patch that I think should fix the error, but note that
it is not well tested!
Peter
** Affects: dbus (Ubuntu
@Hui Wang:
Mistake in Linux Mint 21.1:
sudo add-apt-repository ppa:hui.wang/pa-testing
PPA kann nicht hinzugefügt werden: »'Dieses PPA unterstützt jammy nicht
What can I Do?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
*** This bug is a duplicate of bug 1901922 ***
https://bugs.launchpad.net/bugs/1901922
@Hui Wang:
Mistake in Linux Mint 21.1:
sudo add-apt-repository ppa:hui.wang/pa-testing
PPA kann nicht hinzugefügt werden: »'Dieses PPA unterstützt jammy nicht
What can I Do?
--
You received this bug no
I have 3GB of GPU RAM usage by mutter-x11-frames (and my gpu only has 8GB total)
nvidia-smi:
```
/usr/libexec/mutter-x11-frames 3348MiB
```
Ubuntu 23.04
Kernel 6.2.0-20-generic
Nvidia 530.41.03
GTX 3070 Ti
Desktop with one 4K screen, 200% scaling.
--
You received this bug notificat
Thanks for the explanation, Colin. It's not breaking anything as far as
I can tell, but I'm glad to hear someone's going to get a handle on it.
Something about building for Mantic and seeing the wrong version on the
package sets off an alarm in my head, and now I can ignore it and go
about my work.
Recent Ubuntu 22.04.2 LTS, libgtk-4-common 4.6.6+ds-0ubuntu1,
libgtk-3-common 3.24.33-1ubuntu2,vivaldi-stable 5.7.2921.65-1
'Save as' dialog now works as expected: focus is on filename keyboard
entry, immediately closes dialog.
BAD regression:
Vivaldi window is frozen after that. Does not
With latest apt-get update it is now solved.
** Changed in: gtk+3.0 (Ubuntu)
Status: New => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/2015347
Title
Also, changing gtk themes in gnome-tweak did not solve the issue.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/2015347
Title:
Regression: GTK statusbars look very weird
Public bug reported:
I don't know where I need to report this bug, but it's quite a serious
one.
On both livecd and installed version of Ubuntu 23.04 the statusbars of
some applications (for example libreoffice, Visual Studio Code, the
keychain dialog when logging in and more) are really small an
fixed: https://launchpad.net/ubuntu/+source/rsync/3.2.7-0ubuntu0.22.04.2
** Changed in: rsync (Ubuntu Jammy)
Status: Triaged => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to rsync in Ubuntu.
https://bugs
Thank you for looking into this. The test case is described in
https://github.com/backuppc/backuppc/issues/369#issuecomment-693663922
and boils down to:
> * Create temporary file on host [i.e. backup client, with rsync 3.2.3]
> * Run `/usr/share/backuppc/bin/BackupPC_dump -v -f host` manually on t
Public bug reported:
rsync 3.2.3 (packaged in Ubuntu 22.04) changes stderr handling, leading
another bug in libfile-rsyncp-perl (in Ubuntu 18.04 and 20.04) to
surface [1].
It practically makes using BackupPC 3 impossible with clients using
rsync 3.2.3, as is packaged for 22.04. The fact that Back
** Changed in: ubuntu-meta (Ubuntu)
Status: New => Opinion
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu.
https://bugs.launchpad.net/bugs/2003387
Title:
ubuntu-desktop-minimal should depend on
I see.
"apt-mark auto '*'" may not be "supported" but it works and has been for a long
time, even on Debian. If my installation wouldn't have had an encrypted root, I
wouldn't have run into any issue. And I guess those with a non-encrypted setup
don't need cryptsetup so in this sense ubuntu-mi
@jbicha
After installation, it was fine. It's just that in the process of trying to
clean up leftover packages years later, I did something like:
# apt-get update && apt-get dist-upgrade
# apt-mark auto '*'
# apt-mark manual ubuntu-minimal
# apt-mark manual ubuntu-desktop-minimal
# apt-mark manua
Public bug reported:
The meta-packages ubuntu-desktop-minimal / ubuntu-minimal depend on
everything needed for a functioning desktop / server installation
respectively. Well, almost everything.
Two packages that they don't depend on, but should, or at least it should
recommend them are:
- crypts
This bug is mighty annoying. E.g. you can't simply type to get out
of the save dialog, if you wrongly typed . You first need to
mouse the pointer to the text field.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in U
Now I have a related problem at work, where the external monitors were
not detected after plugging in the laptop in the docking station and
opening the lid. Turning off and on one monitor resulted in detection
(in poor resolution) but not the second external one. When both are
turned off and on, th
Public bug reported:
I have a fresh install of Ubuntu 22.04.3, using the default Wayland, on my
laptop which is used at two locations:
- at work I have my primary built-in 4K display and 2 additional 1920x1080
monitor connected to a HP DisplayLink docking station using DP, connected to my
lapto
And now OPTIONS has to be exported,
and probably should be protected against being empty in the new file. So it
becomes ${OPTIONS:-} and ${1:-}
What else have I missed?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg i
Bother. There is a third problem, a scope issue of some sort.
The errors in ~/.xsession.error go away if "has_options" is moved from Xsession
to its own file in Xsession.d
I don't see why sourceing it should make any difference, but it does.
$ cat /etc/X11/Xsession.d/00
has_option () {
# Ens
Public bug reported:
Jammy Jellyfish 22.04.1 LTS and others. There have been numerous bug
reports and failed fixes for this over several years and releases.
There are a couple of problems in /etc/X11/Xsessions where it fails to
handle options, causing bogus error messages and, doubtless, many
err
The bug described here looks like the one I'm experiencing. I have
multiple yubikeys which I use for SSH and GPG (occasionally U2F but that
doesn't appear to be affected by this). If I just enable the pcscd
service, the daemon doesn't auto-start after a reboot. Running ssh or
gpg commands fails to
When is this going to be fixed and is there a work-around. I have tried
both updating from 20.04 and direct installation of 22.04 and have found
this problem preventing me from using 22.04 [it never boots]. I have two
computers. One is a Dell with nvidia drivers [the perfect target machine
to s
For 22.04, I can additionally confirm the problem for Vivaldi's save dialog.
Whereas the seemingly identical dialog in LibreOffice works as intended.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://b
Public bug reported:
Steps to reproduce:
1. configured debug repo with vim into /etc/apt/source.list like:
deb http://ddebs.ubuntu.com/ubuntu/ focal-updates main
Did that in a docker container where the following is installed:
apt update; apt-get install -y ca-certificates; apt install curl -
Public bug reported:
The default /etc/adduser.conf contains the line:
#NAME_REGEX="^[a-z][-.a-z0-9_]*\$"
Commenting this out in preparation of updating it does not work as
expected:
pra@PABELN-X1E:~$ grep NAME_REGEX /etc/adduser.conf; sudo adduser testuser
NAME_REGEX="^[a-z][-a-z0-9
** Changed in: bash (Ubuntu)
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/664264
Title:
GID is not defined upon user GDM login
Status in ba
** Changed in: lsb (Ubuntu)
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lsb in Ubuntu.
https://bugs.launchpad.net/bugs/597337
Title:
lsb_release should show history of release upgrades
S
Public bug reported:
Summary:
I am using firewalld/jammy,now 1.1.1-1ubuntu1 on my vpn server. The vpn server
is using wireguard and I could successfully configure zones and policies in
firewalld. Yet, iptables does not show the rules from firewalld.
1) System
root@vpn:~# uname -a
Linux vpn 5.15
Can confirm #10 works for me too. Can be confusing, but luckily I
checked for this bug first. The upgrade will block on the message
"Please reboot your system..." but after waiting some time it unblocked
on its own.
--
You received this bug notification because you are a member of Ubuntu
Touch se
commands via /bin/sh, it tries to run e.g. "command" directly, which
fails in Makefiles that try to use "command -v" or "command -pv" to
figure out the full path of an executable program.
Thanks in advance, and keep up the great work!
G'luck,
Peter
ProblemType: Bug
robably only on this AMD 5700G CPU based system (in
an ASUS Desktop X300M system), please just ask.
Thanks for all your efforts.
Peter J. Jansen
Fichtlirain 13
CH-4105 Biel-Benken
Switzerland
Mob.: 0041 79 759 47 40
E-Mail (IEEE Life Member) : p.jan...@computer.org
E-Mail (S/MIME signed) : peter.j
I have got the same issue on 21.10.
Headphones: JBL LIVE 650BTNC
Bluetooth: Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb
v: 0.8 bus-ID: 1-9:6 chip-ID: 8087:0aa7
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address:
bt-v: 2.1 lmp-v:
Public bug reported:
System is Mint 20.2, with the relevant packages taken from Ubuntu Focal.
This is the output of `systemd-resolv --status vpn0`:
Link 7 (vpn0)
Current Scopes: DNS
DefaultRoute setting: yes
LLMNR setting: yes
MulticastDNS setting: no
DNSOve
@seb128 I am aware that this has been fixed in hirsuite, but it remains
unfixed in focal. I am committed to staying on an LTS release.
If this is not the right place to report this bug, could you please
point me to how I can navigate the relevant backporting request process?
--
You received this
Oh, I just found the file. It has a different name than suggested in the
changelog:
/usr/lib/sysctl.d/protect-links.conf
And silly me didn't of just checking what sysctl returns for those values set
in there. It's all good:
$ sudo sysctl fs.protected_fifos
fs.protected_fifos = 1
$ sudo sysctl fs
Just found this, because I also noticed the debsums error. A quick look in the
changelog finds this:
> procps (2:3.3.16-1ubuntu1) focal; urgency=low
> [...]
> * Dropped changes, no longer needed:
> ...
> - 10-link-restrictions.conf: this is redundant with link-protect.conf
> from D
Unplugging the docking station and running with one external display via
hdmi works.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1942427
Title:
Upgrade to 5.11.0-31-generi
Also, switching to an "Ubuntu" session instead of "Ubuntu with Xorg"
made no difference.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1942427
Title:
Upgrade to 5.11.0-31-ge
Public bug reported:
upgrading to latest packages, my setup with 3 displays (internal plus 2
external, plugged into Lenovo USB-c base station) no longer works.
the Settings -> Displays app does find all displays, but the system only
displays on the internal one. Attempting to enable all displays
145.218.238.29
DNS Domain: reddog.microsoft.com
[Workaround]
Reboot the node, DNS should return back to normal.
sos report and additional information: https://private-
fileshare.canonical.com/~pjds/dsv/dns-issue/
Thanks,
Peter
** Affects: systemd (Ubuntu)
Importance
I have seen this happening for months, though not very often. But it
happened yesterday and today again.
Music playing in the background (via Audacious) is garbled. This usually
happens when I open a website in a new tab. Sounds like a bitcrusher
effect to me.
I can reverse the effect by closing
This became an issue in Fedora 33 when they went to systemd-resolved.
They have just packaged and updated to strongsWan 5.9.2 and I can
confirm it resolves this issue without workarounds.
This is a VPN, surely for security reasons alone we should be getting
the latest packages as updates? This aff
Public bug reported:
I switched to nvidia-driver-450-server because my second monitor stopped
working after switching to nvidia-driver-460. However, this switch broke
suspend on my ThinkPad running Ubuntu 20.04. The laptop doesn't properly
suspend anymore, and when trying to get it out of suspend
Thanks for responding. Why is it then that the occurrences are identical with
openSUSE please?
rsvp & thx again. Peter
On Tuesday, May 25, 2021, 12:50:37 PM EDT, Adolfo Jayme
<1929...@bugs.launchpad.net> wrote:
AFAIK, Ubuntu disables some of these emergency keys by default
I have a Yoga C940, which is the precursor to the 9i. It has the
soundbar and two speakers under the body of the laptop. Out of the box
the body speakers did't work but there is a special BIOS for the C940
(only) that activates an amplifier for these speakers. I think that
the C940 only has two
Public bug reported:
I cannot edit files on a Windows share that is smb-mounted by Ubuntu
using VI, VIM or GVIM.
Other applications on Ubuntu do not have this problem, including GEDIT
and LibreOffice
Bizarrely I can create a file with VI, VIM and GVIM, but saving changes in any
subsequent edit
Today I used tasksel to add "lubuntu-desktop" to an "ubuntu-desktop"
installation. Already installed and noticed by tasksel was additionally:
"SSH-Service" and "Print Server".
The installation of "lubunut-desktop" went fine. I logged in to lubuntu-
desktop and now I wanted to remove the "ubuntu-de
The problem is back. This time I let the restart process wait for
several minutes. See this output.
peddecke@omer:~$ sudo service bluetooth restart
Job for bluetooth.service failed because the control process exited with error
code.
See "systemctl status bluetooth.service" and "journalctl -xe" f
How to stop receiving this emails?
---
V prípade akýchkoľvek otázok alebo nejasností ma neváhajte kontaktovať.
S pozdravom a úctou / Best regards and respectfully
Peter Onger
Mobil - 00421 904 526 034
Email - ogi2...@gmail.com
-
Zeitgeist
For some reason, killing the bluetoothd process just worked today unlike
previous attempts in the past days. The problem of the headset loosing
connection during a meeting, blocking the bluetooth process and settings
interface, still occurs requiring a restart of the bluetooth service and
the heads
apport information
** Attachment added: "syslog.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451733/+files/syslog.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "rfkill.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451732/+files/rfkill.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "getfacl.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451731/+files/getfacl.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451730/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451729/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451728/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://b
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451727/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451726/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
h
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451725/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
1 - 100 of 686 matches
Mail list logo
