Re: [SR-Users] Kamailio ignores some ACK

2012-05-11 Thread Klaus Darilion
Set debug=4 and watch the logfile while receiving the ACK. If you do not see any log messages then the ACK is not received by Kamailio (maybe some local iptables/connection tracker problem) regards Klaus On 10.05.2012 08:59, Mino Haluz wrote: We are troubleshooting this issue almost for 2 day

Re: [SR-Users] Kamailio ignores some ACK

2012-05-10 Thread Jason Penton
Actually, sorry I misread your capture - it is using the same address so doubt it the problem of interfaces.. Are you are not getting any logging in debug when the ACK comes in? On Thu, May 10, 2012 at 9:08 AM, Jason Penton wrote: > Hey Mino, > > From your packet captures above it looks like

Re: [SR-Users] Kamailio ignores some ACK

2012-05-10 Thread Jason Penton
Hey Mino, >From your packet captures above it looks like your ACK is coming in another IP address. I also see that you are doing the packet capture across all your physical interfaces (-i any). Perhaps your Kamailio is only configured to listen on the one interface (the one *not* getting the ACK).

Re: [SR-Users] Kamailio ignores some ACK

2012-05-10 Thread Mino Haluz
We are troubleshooting this issue almost for 2 days and we did not find the solution yet. The thing is, that it does not enter even the config file (we have some debug messages at the start, that do not show). Otherwise we do not have any problem with ACK, but only this particular ACK is not forwar

Re: [SR-Users] Kamailio ignores some ACK

2012-05-09 Thread Jason Penton
Seems like a loose routing issue. Are you loose routing in your config file? On Wed, May 9, 2012 at 4:34 PM, Stoyan Mihaylov wrote: > You can use something like wireshark on Kamailio server to see if ACK > packets go in right direction. > I had problem with ACK and BYE, and I saw that in some ca

Re: [SR-Users] Kamailio ignores some ACK

2012-05-09 Thread Stoyan Mihaylov
You can use something like wireshark on Kamailio server to see if ACK packets go in right direction. I had problem with ACK and BYE, and I saw that in some cases ACK and BYE packets looped back in kamailio. May be I used wrong client. On Wed, May 9, 2012 at 5:15 PM, Efelin Novak wrote: > Hi folk

[SR-Users] Kamailio ignores some ACK

2012-05-09 Thread Efelin Novak
Hi folks, I have a strange problem when Kamailio ignores ACKs in a specific scenario. The call flow is as follows: A -> INVITE -> kamailio -> INVITE -> B [omitting 100 and 180] A <- 200 OK <- kamailio <- 200 OK <- B A -> ACK -> kamailio There are INVITE Xlogs, Reply ROUTE xlogs and media-proxy l