Re: [SR-Users] How to install kamailio-4.2.2 in DEBIAN -7.1.0

On 06 Feb 2015, at 00:33, Fred Posner wrote: > On 02/05/2015 06:18 PM, Yanko Marín Muro wrote: >> Hello: >> >> How to install kamailio-4.2.2 in DEBIAN -7.1.0-amd64? >> >> This URL is the last version: >> http://www.kamailio.org/pub/kamailio/4.2.2/src/kamailio-4.2.2_src.tar.gz >> >> Best regar

[SR-Users] One Way RTP from destination SIP server using rtpengine

Hello All, I currently am running Kamailio in a WSS configuration with sipML5. I use rtpengine to convert a RTP/SAVPF packet to a RTP/AVP packet as the destination server only supports AVP or SAVP. RTPEngine has no issues rewriting the packet going out, the SIP session comes up and handshakes co

Re: [SR-Users] Issue with dlg_setflag vs. setflag

I didn't understand that properly from the dialog module README in 6.10. dlg_manage(): "Process current SIP request with dialog module. It is an alternative to setting dialog flag for initial INVITE and Route-parameter-callback execution for within-dialog requests." Your explanation was very

Re: [SR-Users] How to install kamailio-4.2.2 in DEBIAN -7.1.0

On 02/05/2015 06:18 PM, Yanko Marín Muro wrote: Hello: How to install kamailio-4.2.2 in DEBIAN -7.1.0-amd64? This URL is the last version: http://www.kamailio.org/pub/kamailio/4.2.2/src/kamailio-4.2.2_src.tar.gz Best regards, Yanko Antonio Marín Muro Hi Yanko, This url will give you step-

[SR-Users] How to install kamailio-4.2.2 in DEBIAN -7.1.0

Hello: How to install kamailio-4.2.2 in DEBIAN -7.1.0-amd64? This URL is the last version: http://www.kamailio.org/pub/kamailio/4.2.2/src/kamailio-4.2.2_src.tar.gz Best regards, Yanko Antonio Marín Muro --- This message was processed by Kaspersky Mail Gateway 5.6.28/RELEASE runnin

Re: [SR-Users] Presence module for BLF issue

Hi Daniel, Thanks alot for your time, please see the log file attached. If needed, I can provide sip captures received at the phone . Thanks, On Thu, Feb 5, 2015 at 4:42 PM, Daniel-Constantin Mierla wrote: > Hello, > > can you reproduce this with three phones (not to get too much traffic)? >

Re: [SR-Users] Presence module for BLF issue

Here are the contents of the presentity table for the test call. On Thu, Feb 5, 2015 at 5:54 PM, SamyGo wrote: > Hi Daniel, > Thanks alot for your time, please see the log file attached. > > If needed, I can provide sip captures received at the phone . > > Thanks, > > On Thu, Feb 5, 2015 at 4:

Re: [SR-Users] Presence module for BLF issue

Hello, can you reproduce this with three phones (not to get too much traffic)? Use debug=3 in kamailio.cfg and send to me all the logs from kamailio start. I will look to see what happens. Cheers, Daniel On 05/02/15 22:21, SamyGo wrote: > Hi community, > > I'm dealing with a problem here related

Re: [SR-Users] Siremis v4.2.0 Released

Hello, it is the first, at the top, latest version ... Cheers, Daniel On 05/02/15 19:49, Mahmoud Ramadan Ali wrote: > Hi > I can NOT find version 4.2 at the link > http://siremis.asipto.com/pub/downloads/siremis/ > Please where i can download it ?! > Thanks > > On Mon, Feb 2, 2015 at 9:01 PM, El

[SR-Users] Presence module for BLF issue

Hi community, I'm dealing with a problem here related to presence module handling BLF. My BLF phones are Yealink T28p with latest firmware and work perfectly with Asterisk and FreeSwitch but not with Kamailio as expected. What I'm observing here is a malfunctioning statuses due to accumulation of

Re: [SR-Users] Best module to use for interrupting a call ???

>Hello, >>On 04/02/15 13:12, Uri Shacked wrote: >>* Hi, ** I need to create some kind of check with an application outside of *>> *kamailio every X seconds. *>>* The check is per call, to get its status or something and according to *>>* the result do something with the call (transfer, send in

Re: [SR-Users] Using dialog_ng

Shane, Just looking at your config I see you have already set the flag. Can you perhaps send me a log file and I will take a look for you. This is exactly how we, and others (ng voice) use it in our IMS setups so it should work Cheers Jason On Thu, Feb 5, 2015 at 8:48 PM, Jason Penton wrote

Re: [SR-Users] Siremis v4.2.0 Released

Hi I can NOT find version 4.2 at the link http://siremis.asipto.com/pub/downloads/siremis/ Please where i can download it ?! Thanks On Mon, Feb 2, 2015 at 9:01 PM, Elena-Ramona Modroiu wrote: > Hi, > > Siremis v4.2.0 has been released, web management interface aiming at > compatibility with Kama

Re: [SR-Users] Using dialog_ng

Hi Shane, dialog_ng started as a prototype by us quite a while ago to form the basis of dialogs in our IMS implementation using Kamailio. We took quite a lot from the existing dialog module at the time and then built the additional functionality on top. There were some things (like dlg_manage) tha

Re: [SR-Users] Using dialog_ng

Thanks Daniel - that clarity helps. Apologies if I should have been able to glean that from the docs - I just didn't see it in my reading. FYI, dialog-ng has deprecated the dlg_mange() function. Can anybody who has used or involved in writing the dialog-ng module shed some light on what the

[SR-Users] Kamailio v4.1.8 Released

Hello, Kamailio SIP Server v4.1.8 stable release is out. This is a maintenance release of the previous stable branch, 4.1, that includes fixes since release of v4.1.7. There is no change to database schema or configuration language structure that you have to do on installations of v4.1.x. Deploym

Re: [SR-Users] Lint and syntax check

On 05/02/15 13:42, Olle E. Johansson wrote: > On 05 Feb 2015, at 12:33, Manuel Rubio wrote: > >> Hi, >> >> I want to know if someone is using something similar to lint-like >> behaviour[1] and syntax highlighting in editors like Sublime, TextMate, >> emacs, ... for Kamailio configuration files.

Re: [SR-Users] kamailio passthrough user auth

Hello Kai, Many examples of this question exist on the mail list if you search through it. Also, I believe this is an example of what you might want to look for: https://github.com/xlab1/sipfe_kamailio/blob/master/kamailio.cfg Fred Posner The Palner Group, Inc. http://www.palner.com (web) +

Re: [SR-Users] Lint and syntax check

On 05 Feb 2015, at 12:33, Manuel Rubio wrote: > Hi, > > I want to know if someone is using something similar to lint-like > behaviour[1] and syntax highlighting in editors like Sublime, TextMate, > emacs, ... for Kamailio configuration files. > > [1] http://en.wikipedia.org/wiki/Lint_%28soft

[SR-Users] kamailio passthrough user auth

Hi, I have to implement a rather uncommon SIP setup and wanted to ask, if it is even possible with Kamailio. We are among other things a VoIP-provider for a couple of hundred customers. Right now we use a rather old piece of software as a SIP-server, that was written in-house and is deeply inte

[SR-Users] Lint and syntax check

Hi, I want to know if someone is using something similar to lint-like behaviour[1] and syntax highlighting in editors like Sublime, TextMate, emacs, ... for Kamailio configuration files. [1] http://en.wikipedia.org/wiki/Lint_%28software%29 Thanks. Manuel Rubio. _

Re: [SR-Users] Issue with dlg_setflag vs. setflag

Hello, dialog flags (dlg_setflag) are for storing specific flags inside the dialog structure. It is not used to mark a request for creating a dialog. For that you have to use setflag. Cheers, Daniel On 31/01/15 23:10, Anthony Messina wrote: > I'm currently using Kamailio built from master@e59db7

Re: [SR-Users] Does the event_route[tm:local-request] support stateless forwarding configured in the script?

Hello, On 02/02/15 14:59, Klaus Feichtinger wrote: > Hello, > > I´m searching for a way to keep track about success or failure of > locally generated SUBSCRIBE transactions, which are typically > triggered by the RLS module. In case that a subscription is rejected > by the subscribee with any ne

Re: [SR-Users] Using dialog_ng

Hello, I haven't used the dialog_ng module, but (as expected based on the dialog module) if you only set the FLT_DIALOG flag, then the dialog is created when calling t_relay(). The dialog module has dlg_manage() function which creates the dialog immediately, maybe that's in dialog_ng as well. Che

Re: [SR-Users] Out of Memory Error in Kamailio

Hello, On 04/02/15 16:06, Neeraj Swarnkar wrote: > Hi Guys, > > I am using Kamailio-4.2.1. Earlier I was using shared memory of 16GB, > which started popping out of memory error, within few seconds of > generating load from sipp. > > I used sipp following command: > > sipp -s MY_KAM_I

Re: [SR-Users] Multiple OR into a if

Hello, I give it a try and I get the message from: xlog("L_WARN","TU=06\n"); which is the only one that is true in this case. Don't you get it? Btw, I noticed a space after @ in $tu, is it from the message or because you crafted the message for mailing list? Cheers, Daniel On 05/02/15 11:28,

Re: [SR-Users] Multiple OR into a if

Hello Daniel, Sorry, I was thinking that I have already replied with the result of this required test. So, I tried with single condition. All fail (xlog with != is printed) with Request-URI and To-URI which looks like this: 0[0-9]{9}@sip.domain.tld :

Re: [SR-Users] Planing to release Kamailio v4.1.8

Hello, I am going to package v4.1.8 later today. If anyone needs to push some patch into branch 4.1, write to sr-dev first and wait for confirmation. Cheers, Daniel On 03/02/15 13:59, Daniel-Constantin Mierla wrote: > Hello, > > I am planning to release a new version from previous stable branch

Re: [SR-Users] dmq_t_replicate fails with ERROR: t_forward_nonack: no branches for forwarding

Hi, On 5 Feb 2015 09:18, "Leonardo Arena" wrote: > > On mer, 2015-02-04 at 21:15 +, Charles Chance wrote: > > Hi, > > > > On 3 Feb 2015 10:07, "Leonardo Arena" wrote: > > > > > > On lun, 2015-02-02 at 17:54 +, Charles Chance wrote: > > > > [snip ] > > > > > >dmq.my.domain.netresolves to

Re: [SR-Users] dmq_t_replicate fails with ERROR: t_forward_nonack: no branches for forwarding

On mer, 2015-02-04 at 21:15 +, Charles Chance wrote: > Hi, > > On 3 Feb 2015 10:07, "Leonardo Arena" wrote: > > > > On lun, 2015-02-02 at 17:54 +, Charles Chance wrote: > > [snip ] > > > >dmq.my.domain.netresolves to 10.0.0.2 which is proxy2. What I'm > > effectively trying to do with DN

Re: [SR-Users] Linking Kamailio to Asterisk

On 04 Feb 2015, at 15:53, Brian Echesa wrote: > Hi, > > Kindly assist. > I have successfully installed Kamailio and Asterisk. Asterisk is acting as > an PSTN in my case. The trunk between Kamailio and Asterisk is up. Issue is > that i can not route calls to the PSTN. I am using the default

[SR-Users] Out of Memory Error in Kamailio

Hi Guys, I am using Kamailio-4.2.1. Earlier I was using shared memory of 16GB, which started popping out of memory error, within few seconds of generating load from sipp. I used sipp following command: sipp -s MY_KAM_IP -l 2500 -r 50 *Error coming is :* *Feb 4 14:12:23 kamailio_us

[SR-Users] Issues while using Kamailio as proxy with Asterisk

Hi All, I am using Kamailio as proxy server with Asterisk but having some issues with Inbound and outbound calls. Asterisk is a registrar, Kamailio is a just for proxy. Using softphone call are working fine but using hardphone, its creating issues. Here are the test cases. No

[SR-Users] Linking Kamailio to Asterisk

Hi, Kindly assist. I have successfully installed Kamailio and Asterisk. Asterisk is acting as an PSTN in my case. The trunk between Kamailio and Asterisk is up. Issue is that i can not route calls to the PSTN. I am using the default configuration version: kamailio 4.2.2 (i386/linux) OS: Debian

Re: [SR-Users] [sr-dev] RTPEngine - No support for kernel packet forwarding available

Thanks for explanation, this definitely makes more sense. Thank you. On Thu, Feb 5, 2015 at 9:29 AM, Olle E. Johansson wrote: > > On 05 Feb 2015, at 08:27, Muhammad Shahzad wrote: > > I post it on both since i was a bit confused about which list is > appropriate for this question. > > Anyways

Re: [SR-Users] [sr-dev] RTPEngine - No support for kernel packet forwarding available

On 05 Feb 2015, at 08:27, Muhammad Shahzad wrote: > I post it on both since i was a bit confused about which list is appropriate > for this question. > > Anyways, i will toss a coin next time. ;-) Please always start with sr-users. Most developers are on that list and will try to help you, as