Hi Stef,
sorry, some of the recent mails from this list didn't make it into my mailbox.
> Could apply the following patch to
>linux-2.4.21/drivers/parport/parport_pc.c, rebuild and install modules, then
>reboot.
>I'd like to know what the message 'Parallel port printer control=xx' reports.
>Yo
Hi Stef,
> It might be worth passing parameter to the parallel port module in
> /etc/modules.conf to have it used:
> options parport_pc io=0x378 irq=7 dma=none
OK, done. It works now as root with port /dev/parport0, but still as normal
user, I get the following:
sven@gimli:/dev$ /usr/src/sane-
Hi Stef,
thanks for the quick answer!
Hardware: ASUS A7V (VIA Chipset) with Athlon 1300, Scanner: UMAX Astra 2000P
I assume the problem is due to ppdev on my 2.4.21 kernel (see the two
different ppdiag outputs below). I have also seen your thread with Ryan
Harkin (sorry, didn't see it before).
Hi List,
when trying to setup SANE for my Unax Astra 2000p, I experience the following
strange behaviour:
when setting
port 0x378
in umax_pp.conf, the scanner is properly detected and works fine (at least as
root), but setting it to
port /dev/parport0 (as suggested for Linux)
results in t
