Hi Stef, > It might be worth passing parameter to the parallel port module in > /etc/modules.conf to have it used: > options parport_pc io=0x378 irq=7 dma=none
OK, done. It works now as root with port /dev/parport0, but still as normal user, I get the following: sven@gimli:/dev$ /usr/src/sane-backends-1.0.12/tools/umax_pp -p -t 32 [sanei_debug] Setting debug level of umax_pp_low to 32. [umax_pp_low] SANE_INB level 3 [umax_pp_low] sanei_umax_pp_InitPort(0x378,(null)) [umax_pp_low] sanei_ioperm() could not gain access to 0x378 failed to gain direct acces to port 0x378! permissions are: sven@gimli:/dev$ ls -l parp* crw-rw-rw- 1 root lp 99, 0 2003-10-13 12:18 parport0 crw-rw-rw- 1 root lp 99, 1 2003-10-13 12:18 parport1 crw-rw-rw- 1 root lp 99, 2 2003-10-13 12:18 parport2 PPDIAG (as root) is still: sven@gimli:/dev$ sudo /home/sven/bin/ppdiag S01: parport built as module S02: parport0: S02: modes:PCSPP,TRISTATE,EPP S02: ADDR :0x378 S02: IRQ :7 S02: DMA :no DMA used S03: no parport parameters S10: couldn't find if ppdev is built in or a module S10: It is likely that your kernel configuration has no ppdev support S10: exiting ... Did I miss anything? Thanks, Sven > > Also, running the umax_pp tool with a trace level of 32 (-t 32) will > give > some hints on what modes are detected. > > Regards, > Stef > > _______________________________________________ > sane-devel mailing list > sane-devel@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
