Thanks for your help Peter
Thanks
Frank
On Tuesday 06 August 2002 01:27, Peter Kirchgessner wrote:
> Hello Frank,
>
> within the messages below, there are some which I don't know if they are
> important. Maybe someone else knows more. See below.
>
> Bye
> Peter
Hi Peter
Thanks for your assistance.
On this box the SCSI card is an Adapted 2906
PC Bus Type 32 bit PCI
Total devices supported: up to 7
Data transfer rate: 10MB/sec
supported protocol: SCSI-1, SCSI-2, Fast SCSI-2
Interface transfer method: Bus master DMA
On the dual boot box. Who knows. That c
> hp.lis 2>&1
> gzip hp.lis
>
> And please send back the file hp.lis.gz.
> BTW. What SCSI-card are you using with the scanner ?
>
> --Peter
>
> Frank Roberts - SOTL wrote:
> > Thanks again for the help Peter.
> > I did the following:
> > 1. Resto
.
Thanks
Frank
On Monday 05 August 2002 01:14, Peter Kirchgessner wrote:
>
> Don't remove the files. You need at least dll.conf too. And check that
> it has the line with hp activated.
>
> --Peter
>
> Frank Roberts - SOTL wrote:
> > Thanks for the help Peter.
> >
&
Thanks for the help Peter.
I did the following.
1. Changed /dev/scanner to /dev/sg0
2. Made directory sane.d-bak
3. removed all configuration files from sane.d except hp.conf
4 as root did chmood 666 /dev/sg0
Hi All:
I hope You people will have time to help a relative novice with configuration
of an HP 6100 C which is to be used intermidently on 2 different RH 7.3
systems.
As stated previously the scanner is an HP 6100C if I issue the command:
The scanner is connected by 40 pin scsi.
Several comma
