Hi all,
Is there any proposal or standard way in SANE to check for scanner
inactivity to switch off the scanner lamp? I have read some scanner
backends source code and some of them have an option to switch off the
scanner lamp after scanning; others have a little prog (look into SANE
`tools
Hi!
Just for today I could get access to a HP3670 scanner-
If you execute this command line in linux, and using the files supplied
in the CD-ROM:
strings hpgt2436.dll | more
you will find those strings:
Device_638_A07
GL646U
Sparrow
GL646 Setting
so at first it's possible the scanner is usin
Hi,
1. Is there any usbsnoopy log published on-line in the Internet for
the HP3670 and/or HP2400 models?
2. Preview scan will be enough for a initial analysis. Does the
scanner work after the preview scan then using usbsnoopy?
3. You said you dont' receive anything in the log, but does
Hi Eddie,
Some years ago I was in the same situation as you, but fortunatelly I
know about programming (more or less ;) I had to develop hp4200 backend
and I could obtain some results without too much documentation available
(later I could get much more docs and then improve my results). S
Henning Meier-Geinitz wrote:
>I guess this patch should be included in the sane-backends
>distribution? Would you be able to be the maintainer of that backend
>in this case?
>
I will have to make corrections for those problems you have mentioned
for the backend to be included in the distribution.
Hey! Wait a bit! ;)
I did not tested the compilation with libusb support, sorry. I have
now tested both: compiling sane with libusb support and without it and
you can now download again the corrected patch at the same location:
http://hp4200-backend.sourceforge.net/sane-backends-1
Hi all,
After reading this I have also updated the patch for SANE 1.0.13 but
until Saturday at the afternoon I can not test it. Can anybody here
that owns an hp4200c scanner and is capable of patching and compiling
SANE 1.0.13 test this stuff before Saturday?
You can download the patch at
