Hi! Just for today I could get access to a HP3670 scanner-
If you execute this command line in linux, and using the files supplied in the CD-ROM: strings hpgt2436.dll | more you will find those strings: Device_638_A07 GL646U Sparrow GL646 Setting so at first it's possible the scanner is using Genesys Logic's single-chip GeneScan™ II or similar. I also opened the scanner. The EliteMT chip is memory, and the L6219DS is the power driver for stepper motor. The bigger one says 26-00204-00A 0323FGSPW-10 So it seems the key is 26-00204-00. There are also some mentions to something called Tulip Driver in the dll files. More to come. Adrian P.J. Lone Directory wrote: >Well the smaller chip says EliteMT 100Mhz while the >bigger one shows only numbers on two diffrent lines as >shown below: > >26-00204-00A >0314FGKC9-10 > >The manual that is available on HP site >(www2.hp.com/en/taskPageSelect.jhtml?reg=&plc=&lc=en&cc=us&prodId=hpscanjet3298544&pagetype=manual&docparent=manual) >is mentioning also another model: Scanjet 370. > >Attached you can find the output of sane-find-scanner >and /proc : > >Is there anything else that I can do to make it work? >Shall I make some specific test (maybe with snoopy) >and post here the outcome? > >regards, >Timur > >
