It could be turned off. But some people said that the option would work
with their Astra 2200 scanner, thats why I did not disable this option.
May be it depends on the scsi controller or it=C2=B4s driver, I am not su=
re.
Oliver
Am Fre, 2004-12-31 um 19.17 schrieb Rich:
> Thanks! That did it.
Hello,
I have a Scanfx with an ISA adapter card. The card is mapped to a
jumper selectable range of addresses (0x220,230,260,270,320,330,360,370)
and IRQ settings(3,4,5,10,11,12). After looking at the card, I
determined that it is similar to a parallel port with the exception that
the data bus i
On Fri, 2004-12-31 at 13:56 +, Alfred Broda wrote:
> Hi!
> I am writing about an old Mustek Scanner: GS-400 (handheld, true 256
> gray, 400 DPI), connected to an ISA card (a GI1904 card).
> I got it some time ago, and have a Windows driver floppy. It still
> scans, unfortunately
Thanks! That did it.
Can this be turned off in the backend?
Regards,
Rich
On Fri, 2004-12-31 at 14:06 +0100, Oliver Rauch wrote:
> Hello.
>
> Disable "quality calibration" if it is enabled.
>
> Oliver
>
> Am Mit, 2004-12-29 um 18.45 schrieb Rich:
> > Hi,
> >
> > I searched through the archi
Hello.
Disable "quality calibration" if it is enabled.
Oliver
Am Mit, 2004-12-29 um 18.45 schrieb Rich:
> Hi,
>
> I searched through the archives and found an article "xsane preview and
> scanning problem" from Tue, 4 Feb 2003 20:47:53 by HoonKook Shim that
> explains the same problems I am now
Hi!
I am writing about an old Mustek Scanner: GS-400 (handheld, true 256
gray, 400 DPI), connected to an ISA card (a GI1904 card).
I got it some time ago, and have a Windows driver floppy. It still
scans, unfortunately only uder Windows, and I am unable to find any means to
star
Hello Michele,
I have the same problem with my CanonFB630U.
The scanner did run with Kernel 2.4 and first it did also run with 2.6 in Suse
9.1 (but only
as root) .
Since one of the onlineupdates I could not get it to work again - always the
"device busy"-
problem.
Christian Neugebauer
> A
