Hello. Disable "quality calibration" if it is enabled.
Oliver Am Mit, 2004-12-29 um 18.45 schrieb Rich: > Hi, > > I searched through the archives and found an article "xsane preview and > scanning problem" from Tue, 4 Feb 2003 20:47:53 by HoonKook Shim that > explains the same problems I am now encountering. > > I recently upgraded to 2.6.10 from 2.6.9, hoping to address some scsi > issues with cdrecord and xsane. However, after upgrading, the same > issues exist. > > My scanner is detecting correctly. After applying permissions to > the /dev/scanner, I can run as root or any user. I can run the preview > over and over, with no issues. The scanner works correctly. However, > when I press scan - xsane freezes after the scanner begins to move. > > I've tried scanimage, same issue. It detects the scanner, but cannot > scan an image. > > Once xsane or scanimage freezes, the scanner can no longer be detected. > However, if I reset the power on the scanner after about 15 seconds or > so, after reset, I can once again detect the scanner successfully. > > I also commented out any backend I'm not using in the dll.conf file. > > > Here are the specs: > > > Linux 2.6.10 > > scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 > <Adaptec 2930CU SCSI adapter> > aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs > > sr0: scsi3-mmc drive: 0x/56x cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > Vendor: UMAX Model: Astra 2200 Rev: V2.2 > Type: Scanner ANSI SCSI revision: 02 > Attached scsi generic sg1 at scsi1, channel 0, id 2, lun 0, type 6 > Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c > Type: CD-ROM ANSI SCSI revision: 04 > sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray > Attached scsi CD-ROM sr1 at scsi1, channel 0, id 4, lun 0 > Attached scsi generic sg2 at scsi1, channel 0, id 4, lun 0, type 5 > > sane-find-scanner > found SCSI scanner "UMAX Astra 2200 V2.2" at /dev/scanner > found SCSI scanner "UMAX Astra 2200 V2.2" at /dev/sg1 > > scanimage -L > device `umax:/dev/scanner' is a UMAX Astra 2200 flatbed > scanner > device `umax:/dev/sg1' is a UMAX Astra 2200 flatbed scanner > > > xsane-0.96 (c) 1998-2004 Oliver Rauch > Email: oliver.ra...@xsane.org > package xsane-0.96 > compiled with GTK-2.4.10 > with GIMP support, compiled with GIMP-2.0.4 > XSane output formats: jpeg, png, pnm, ps, tiff, txt > sane-backends-1.0.15 > sane-frontends-1.0.13 > > > Thanks, > Regards > Rich > > > >
