Hello!
Where can I get Linux
driver for Silicom Ethernet+RS-232 serial port PCMCIA card that used to be
once on http://www.silicom.co.il/linux.htm?
Thanks
Sincerly
amples I looked at had it in there. Never realized there
was a "force user" option. Possibly if this works I can just use force
user=lp, since lp owns the print spools.
Thanks for the ideas, I'll try them out tomorrow.
>hth,
-Alex
samba spool. It
so easy for me to over look these little details.
Thanks to those of you who responded and/or considered my message. The
replies here got me to think about the problem in a little different way,
and I figured it out. I was just going around in circles by myself.
-Alex
Old
I need to setup a mail server for 3 domains and I was wondering if I can
setup sendmail or qmail so that I can have accounts with the same name but
for different mailboxes. Example:
[EMAIL PROTECTED] -> delivered to unix user: admin
[EMAIL PROTECTED] -> delivered to unix user: alex
Preparing...###
[100%]
1:glibc-common ### [
17%]
2:glibc ### [
33%]
error: %post(glibc-2.3.2-27.9) scriptlet failed, exit status 1
the paths right (i think --root is
> the option).
>
> yours josef
>
> On Fri, 2003-07-11 at 14:20, Alex wrote:
> > Preparing...###
> > [100%]
> >1:glibc-common
t; <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 11, 2003 12:19 PM
Subject: Re: qmail or sendmail
> On Thu, 10 Jul 2003, Alex wrote:
> Alex,
> Either will work. In sendmail you need to create the virtual user
> table (/etc/mail/virtusertable). Add the ent
[EMAIL PROTECTED]
> Subject: Re: Glibc update & dead redhat - HLLLPPP !!!
>
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Fri, 11 Jul 2003 15:20:18 +0300, Alex wrote:
>
> > Preparing...
> ###
> >
!
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Does anybody know what is this and what would be the cause+fix for something
like this?
Forged DCC command from 192.168.254.26: 82.xxx.xxx.xxx:1799
Thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
hat should I
modify in mysql.
Some help?
Thanks.
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
I can see this is not
the problem here... because I still get those messages, so I'm a bit
confused about what is really the problem.
Alex
- Original Message -
From: "Jason Dixon" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 06, 2003 9:
alf of them). The same
smb.conf I had 2 months ago and everything was working just fine, but
now
Can you give me some hints on what should I do and why does this happen?
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
I think this is maybe off-topic but I couldn't get an answer fron
openwebmail forum on sourceforge so I thought I ask you guys so here it is:
I was trying to get postfix and vm-pop3d to work with openwebmail but I got
a lot of errors so I decided to continue tomorrow and restore openwebmail
config
not the
proxy server which exists to serve only web traffic.
Thanks!
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
but a
custom build from sources ntfs support etc...).
Any ideeas on what I'm missing here?
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
I need to setup postfix with virtual domains and be able to specify quota
for virtual users. I downloaded postfix 2.0.14 rpm for RH9. What should I
change in postfix config to use quota for virtual users?
The users will check their mail via vm-pop3d and openwebmail.
Thanks.
Alex
--
redhat
What's the corect installation procedure for java on rh9 so that I will be
able to use the java pluging for mozilla and also to be able to run java
applications?
Thanks.
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
t I found on the net are a little
confusing.
I also need to prioritize interactive traffic (IRC and yahoo/msn messengers)
and ICMP ping (to impress my boss :-) ).
The documentation has done nothing but to confuse me in this situation.
Please help me with this!
Thank you in advance for any
like
RedHat... Is there a way to make this work?
Thanks
-Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Are there any Linux equivalents for Microsoft's ActiveSync? I have a
Compaq Aero hand-held (Windows CE) and I would like to be able to transfer
contacts and files back and forth over a serial link
Thanks
-Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?su
Is there an equivalent for M$'s ActiveSync for Linux? I have a handheld
and I would like to download my contacts from it.
Thanks
-Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
:
/sbin/tc class add dev eth2 parent 1:2 classid 2:11 htb rate 50kbit ceil
100kbit prio 5
/sbin/tc filter add dev eth2 parent 1:0 protocol ip prio 5 u32 match ip dst
192.168.254.10 flowid 1:11
Would this be the correct commands?
Thanks.
Alex
---begin my script
/sbin/tc qdisc del dev eth2
:2" is unparsable
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
Thanks!
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Paula Fernandes wrote:
On Sáb, 2003-10-04 at 17:03, Klaus Zahradnik wrote:
On Sat, Oct 04, 2003 at 04:44:38PM +0100, Paula Fernandes wrote:
Hi list,
I need to mount a disk with a windows system to recover some files from
the disk. I plug it into the secondary IDE has slave.
I have created a new
add dev eth1 parent 1:1 classid 1:2 htb rate 5mbit
/sbin/tc filter add dev eth1 protocol ip parent 1:10 prio 5 handle 5 flowid
1:2
/sbin/tc class add dev eth1 parent 1:10 classid 4:11 htb rate 128kbit ceil
256kbit prio 5
/sbin/tc filter add dev eth1 parent 1:10 protocol ip prio 5 u32 match ip dst
1
Please go FUCK YOURSELF !!!
...and... almost forgot:
Norton AntiVirus removed the attachment: movie.pif.
The attachment was infected with the [EMAIL PROTECTED] virus.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 06, 2003 7:17 AM
Subject: Re:
My sincere apologie to everybody on this list for that message.
I did a reply instead of writing the corect address in the field.
I'm really sory for this!
Please accept my apologies!
Thank you,
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redha
ror 1
Any ideas?
Thanks,
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
How can I adjut the clock on my machine (RH 9 system)? I reads 6 am and
instead the corect time is 01:00 PM
Thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
out-all |ipac~o||all||
in-192.168.254.2|ipac~i||all|0/0|192.168.254.2
out-192.168.254.2|ipac~o||all|192.168.254.2|
and so on
Any ideeas?
Thanks,
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
am I missing here? Any special config steps to take after I installed
RH9 (postgresql from redhat dist) ?
Thanks,
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
I did su - postgres but when I try to insert the file I get the same error.
:(
-bash-2.05b$ psql -U bbstatus -e bbstatus < bbstatus.sql
psql: FATAL: IDENT authentication failed for user "bbstatus"
Alex
- Original Message -
From: "Mufit Eribol" <[EMAIL PROTECT
from
isp1. I'm trying this with no luck, and I was wondering maybe someone has
more experience with this type of setup.
I seems that whatever I do the packets only whant to go via isp1. I have
attached a script which contains all the stuff that I'm using.
Any ideeas?
Thanks
A
more speed only to a
specific user when I have no NAT setup and don't want to either.
This is a puzzle for me, so maybe if you guys have any hints on how to do
this, you will share that with me.
Thanks.
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.red
milar...anyway nothing not
even close to the real amount of traffic (not counting the traffic generated
by the rest of the users on the privaet network ..and they did work on the
net at that time).
Thanks in advance for any hints on this!
Alex
---
My files:
/usr/loca
Can anyone recommend a good traffic accounting software that will let
clients see the number or Mb transferred in a given period of time with
or without graphics showing speed. Basically I need something that has a
web interface and when a user logs in with his password he will be able
to see his i
You are very wrong. MRTG does not offer a web interface with passwords
for each user to see his trafic and it does not cound TOTAL MB
transfered by that user in a given period of time.
On Wed, 2003-07-02 at 16:39, Robert Canary wrote:
> mrtg
>
> Alex wrote:
> >
> > Can an
Does such a thing even exist? If so, then where?
I only saw on the net support for apache 1.x, but nothing about versions
above apache 2
Thanks!
Alex
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Ok and
the pointer jumps and my settings return. I had just changed the
acceleration and sensitivity a little. Sure would be nice if it would
remember my settings.
Thanks for any help from anyone,
Alex
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubs
lere å bruke, alltid tilgang til Adressebok, Kalender og Notisbok
I'm no expert, but I had a problem where I could not get them to talk
and found out I had the net address mask set different on the XP box.
After changing the XP setting, they would talk with each other. If only
human r
not on one of the first 2 IDE devices found (counting CD drives also.)"
--Alex Janssen
Jay Crews wrote:
I am installing RedHat 8.0 on 2 new Dell 1.8 gig machines.
After installation, one boots fine from the hard drive,
but the other does not. It will only boot from the boot disk
crea
Try the file /etc/rc.d/rc.local
-Alex Janssen
IS Department wrote:
I want to run a command everytime the system starts up. I have Redhat
8.0. Where do I put this command?
Thanks!!
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https
as a simple SVGA just to get
it working. What do you have to loose?
Alex
Cassandra wrote:
Hi!
I am a new user to this group and I am a new user to Linux since
yesterday. I have Redhat 7.3 and did install it yesterday. I chose to
select to install everything and did wait to cinfigure the
07 Nov 5 22:24 test.c
[apj@wattsx apj]$ ./test
By Jove, it works!
Check your compiler/include file install/path.
Usually the first error is the important one. The rest are a cascade
effect of the first. Fix the first and the rest go away.
I studied K&R in 1983. It's a good place
you provided where your said you had read
that Lilo and Grub may complain if the boot drives are not on the
primary controller. Seemed like a logical lead.
Seems that if it works now, it shold keep working. Have faith.
Glad it worked.
Alex
Jay Crews wrote:
Alex writes
The only thing I
I think the latest RH is 2.4.18-17.8.0
At least thats what I just dl'd Nov 2.
Were there any errors during the boot process? All [Ok]?
Alex
Marc Audard wrote:
Hi
Apparently, with the latest kernel (2.4.18-17.7.x), I cannot
get any sound anymore (ESS Maestro3i). Any idea?
--
r
w next Filesystems will be formatted
/ and /boot without problems.
After that the installationimage is written on the
HDD --> machine freeze (cant do nothing, must reeboot manually, no
alert)
I also tried text mode installation. Same
prob.
What is my fault?
THX
Alex
no,
this was is not!
- Original Message -
From: "João Pedro" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, November 10, 2002 3:38 PM
Subject: Re: RedHat 8 Inst. freeze
> Alex, it looks like the problem is that you have placed Lilo in
> /dev/h
-->PnP-->DMA Channel 7
-->PnP-->IRQ3-->PCI/PnP-->IRQ4-->PCI/PnP-->IRQ5-->PCI/PnP-->IRQ7-->PCI/PnP-->IRQ9-->PCI/PnP-->IRQ10-->PCI/PnP-->IRQ11-->PCI/PnP-->IRQ14-->PCI/PnP-->IRQ15-->PCI/PnP-->reserved
memory size-->disabled-->reserved memory address-->C8000 (cant set
anything at the moment)PHERIPHERAL SETUP:-->OnBoard
FDC-->enabled-->OnBoard Serial Port1-->3F8/COM1-->OnBoard
Parallel Port-->378-->Parallel Port Mode-->normal-->EPP
Version-->n/a (cant set anything at the moment)-->Parallel Port DMA
Channel-->n/a (cant set anything at the moment)-->Parallel Port
IRQ-->7-->OnBoard IDE-->bothFilesystems will be formatted / and /boot
without problems.
After that the installationimage is written on the
HDD --> machine freeze (cant do nothing, must reeboot manually, no
alert)
I also tried text mode installation. Same
prob.
What is my fault?
THX
Alex
rom:
L
Vachon
To: [EMAIL PROTECTED]
Sent: Sunday, November 10, 2002 7:13
PM
Subject: RE: Installation freeze! Now
with my BIOS settings
Alex,
Did
you specifically test the monitor during setup? Even if the OS probes
the video card correctly, the monitor must be set
is now at the
graveyard. Tried some new HDD and VOILA.
Evrything passed!
BIG THANX TO THE COMMUNITY :)
Greetz Alex
le to find a
(Bgood page that documents someone hooking their Linux box to a TV.
(B
(B
(B-Alex
(B
(B
(B
(B- Original Message -
(BFrom: <[EMAIL PROTECTED]>
(BTo: <[EMAIL PROTECTED]>
(BSent: Wednesday, December 04, 2002 7:08 PM
(BSubject: Video output possible?
(B
(B
Hello,
I am facing a problem with my mail server. It is running on Redhat 6.2. The
mail services stops automatically with time interval.Then I have to restart
the m/c and then again it will start and stops after some time.When I did
netstat -an it shows something like this for so many IP addresse
I had this problem with Netscape crashing on java pages on RedHat distro all
the time,
but now at home I am using SuSE 6.2 - and do not have any problems with
Netscape.
I still use RedHat on a my other computer(server)
Alex
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe&qu
Hi,
I used to send mail to all users by using the following command and it was
working fine;
mail -s "subject" `cut -f1 -d:/etc/passwd`http://www.netaddress.com/?N=1
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
Hi,
I am using 6.0 as my mail server.I have created all the accounts and put dummy
passwords.But from the client( say eudora..)they are not able to change the
password. What could be the reason for this and how can I solve this?Thanx in
advance.
Regards.
_
Hi,
When I go through the Redhat site they are mentioning that we can configure
the PPP through "rp3-config". But when I search there is no such file in the
server.Any idea where can I find this?Do I have to install this
manually?Please help.
Thanx in advance.
Regards.
Hi,
This may seems to be very simple. How can I attach a Microsoft word document(
test.doc) along with an e-mail and sent it to everybody.
Thanx in advance.
Regards.
Get free email and a permanent address at http://www.netaddr
e mail
kmail
Please CC the reply to the mailing list so you can a variety of answers.
On Thu, 05 Jun 2036, Manoj Alex wrote:
> Hi,
>
> This may seems to be very simple. How can I attach a Microsoft word
document(
> test.doc) along with an e-mail and sent it to everybody.
Hi,
My system is having filesystems like this;
/
/var
/oracle
/database
Suppose if I want to remove one filesystem and merge it with another what I
have to do? Please help.
Thanx in advance.
Regards.
Get free email and a pe
Hello,
I am planning to use Apache as my proxy server and successfully tested out. My
problem is that is there any way I can enable the username password
verification and how? Thanx in advance.
Regards.
Get free email and a pe
Hello,
Iam having a Linux 6.0 mail server. At the time of installation I made 150Mb
swap space. But when yesterday I tried the "top" command I found the
following,
swap 0K av,0K used,0K free
What does this mean?
My swap partition is gone or what? How can this happen?
If it is gone how can I
Hello,
I want to find the activities doing by some user defined on the system.Can
anybody help me in this?
I think there is a command called "w". But I don't want this.I want the full
activities doing by that user recorded.
Thanx in advance.
Regards.
_
allations with no updates for any rpm from the 6.1 cd. Does anybody have any
suggestions, except for not using NIS at all?
Thanks in advance,
Alex Bron
Hello,
I am running RH5.0 as my mail server.I am facing a problem.Suppose user "X"
send a mail to "Y" , "Z" receives it."Z"'s address is not mentioned on the
mail. What could be wrong? Please help.
Thanx in advance.
Regards.
Hello,
Is there any way that I can stop people sending and receiving mails with
attached files with extensions like .jpg,.mpg etc.I am using Linux 5.0.Need
help.Thanx in advance.
Regards.
Get free email and a permanent address
Hello,
Presently I am having Linux as my mail server.I am planning to change my mail
server. But it should fullfill my requirements.
My requirements are;
1. it should support and handle more than 2000 accounts.
2. The system should be stable and secure.
Which is the best O.S ? Need help.
Than
Hello,
Presently I am having Linux as my mail server.I am planning to change my mail
server. But it should fullfill my requirements.
My requirements are;
1. it should support and handle more than 2000 accounts.
2. The system should be stable and secure.
Which is the best O.S ? Need help.
Than
Hello,
Iam running 5.0 as my mail server.We are having two domins defined on it.Say
foe eg. [EMAIL PROTECTED] and [EMAIL PROTECTED]
My question is is there any way I can forward automatically all the mails
coming to [EMAIL PROTECTED] from my local domain.At the other end they are
running Exchang
Hello,
Iam running 5.0 as my mail server.We are having two domins defined on it.Say
foe eg. [EMAIL PROTECTED] and [EMAIL PROTECTED]
My question is is there any way I can forward automatically all the mails
coming to [EMAIL PROTECTED] from my local domain.At the other end they are
running Exchang
Hello,
Iam running 5.0 as my mail server.We are having two domins defined on it.Say
foe eg. [EMAIL PROTECTED] and [EMAIL PROTECTED]
My question is is there any way I can forward automatically all the mails
coming to [EMAIL PROTECTED] from my local domain.At the other end they are
running Exchang
Hello,
Is REdHat 5.0 is Y2K complaint? If not what is the precautions I have to take.
I am having 5.0 as my mail server. Need help.
Thanx in advance.
Regards.
Get free email and a permanent address at http://www.netaddress
How can I configure the network adapter to work at 100Mbs/Full
Duplex, from Linux. Can I eve do that from Linux ?
Thanks.
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
I've been told) will do full duplex if the hub will
> do it (by hub I mean the thing it's connected to, be it a switch or
> router, etc).. and if not, they default to half.
>
> When asking such questions, it also helps to let us know exactly which NIC
> you are using ;)
&g
-libs.
i killed the symlink, reinstalled the libs rpm, and the gnome-terminal
worked again. you can just readjust the link manually instead...
--sasha
David Miller <[EMAIL PROTECTED]> wrote:
> Alex,
> No, i haven't figured it out yet. Using KDE for now.
> -Dave
>
now, and boot it up again, the clock is 1 hour
behind - just as if the
DST change is forgotten. As this server is also
time server for the rest
of my net, it's double trouble as all clocks are
starting to run slow.
How can I solve this?
Regards, Alex Bron
boot it up again, the clock is 1 hour behind - just as if the
DST change is forgotten. As this server is also time server for the rest
of my net, it's double trouble as all clocks are starting to run slow.
How can I solve this?
Regards, Alex
Hi all !
This is my problem:
I have a routing table like that and machines with ip 193.153.245.176 and
194.153.245.181 cannot ping each other.
what line with route command must be in my routing table to resolve that
problem ? All machines can ping the internet with NO PROBLEM.
Kernel IP ro
very much :-)
Regards,
Alex Bron
- Original Message -
From: Warren Melnick <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 19, 2001 10:22 PM
Subject: RE: Groupware anybody?
> I believe Lotus Domino might fit the bill.
>
> Unfortunately there i
ot -P hp1600c -r %s
printing = BSD
read only = yes
-Alex Tabony - [EMAIL PROTECTED]
510/849-2911 Voice/TTY
510/849-2968 Fax
Not all those who wander are lost. -jrrt
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
ny replies.
-Alex Tabony - [EMAIL PROTECTED]
510/849-2911 Voice/TTY
510/849-2968 Fax
Not all those who wander are lost. -jrrt
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
d files
in buffer, are not going away.
Any ideas on what is going on, and what I can do to fix it? What flags
something in buffered memory as being "active" or "protected"?
Thanks for any help again.
-Alex
Current ps and update -d below
===
update
he grow to
fill and exceed the available memory (excepting a tiny amount).
This machine is working as a file/print share and as a mail server with pop
access for about 20 clients. The process list shows nothing out of the
ordinary. CPU usage is less than <5%.
Any ideas?
-Alex Tabony - [EMAIL PRO
he grow to
fill and exceed the available memory (excepting a tiny amount).
This machine is working as a file/print share and as a mail server with pop
access for about 20 clients. The process list shows nothing out of the
ordinary. CPU usage is less than <5%.
Any ideas?
-Alex Tabony - [EMAIL PRO
at limit)...
And one more: modern high-end Unix systems like Compaq's GS line
allow to add processors and memory on-line (just like power supplies,
disks, PCI cards etc etc etc) ending up in a non-stop computing environ-
ment (unless you really pull the plug :-)
Alex Bron
__
o
insmod a driver? Kernel 2.4.3 would solve my problem?
Thanks!
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
o
insmod a driver? Kernel 2.4.3 would solve my problem?
Thanks!
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
What should I do so that messages comming from
[EMAIL PROTECTED] to appear like [EMAIL PROTECTED] (without the machine's
name).
Thanks.
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/lis
7;s. Could this be some sort of attack?
Thanks!
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
I have 2 quick questions:
How can I limit the upload with cbq or with some other software. Basicaly
I need to limit the upload bandwith for audiogalaxy transfers.
The other posibility is blocking the audiogalaxy and morpheus uploads. Now
how can I do that? I will be more happy if I can limit the
How can I start a program from rc.local and make that program NOT run as
root. Basically I have an irc bot, eggdrop 1.6.8 that I need to be started
as soon as the system boots up. The thing is that eggdrop would not run as
root...so how can I make it run as another user?
Thanks!
Alex
the web without proxy..
Thanks,
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
> If you are using a firewall, it is easier and more efficient just to block
> outbound port 80 and open outbound port 8080 - force your users to use 8080.
Yes, it's true, but I don't want that...I what to redirect port 80, not to
nd, "redir" that does
just that. Is it true? Or what alternative I have to do this, ro redirect
port 80 to 8080 ?
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
ope I can solve this!!!
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
How can I block all traffic originating from a specifi MAC address
Alex
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
On 18 Apr 2002, Havoc Pennington wrote:
>
> Toralf Lund <[EMAIL PROTECTED]> writes:
> > On 18/04 2002 16:05 Havoc Pennington wrote:
> > > Toralf Lund <[EMAIL PROTECTED]> writes:
> > > > What exactly is missing? It can't be the actual package handlers
> > > > because they're in /usr/lib/vfs/extfs
--device cuaX
where X is either 0 (for com 1) or 1 (for com2)
Another solution is to get gpm-1.13, run as gpm -t pnp -R, and
configure XFree86 for MouseSystems Protocol with /dev/gpmdata as the
device.
I use the second option and all is well.
Alex
--
PLEASE read
Heyas,
How does one enable printing accounting?
I've put in af lines within /etc/printcap
but the acounting file never gets touched.
Thanks, Alex
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat
1 - 100 of 206 matches
Mail list logo
