|
Hi List,
I post my prob once again BUT now with my BIOS settings (look at the
end).
I exactly wrote it down like it is at the moment. Perhaps that helps!
I am trying to install RedHat Linux 8.0 with
the configurations you see underneath on my machine but
the Installation freeze. ----->I also tried
RedHat 7.3 same prob! What do I wrong???
My System:
AMD Athlon 700MHz CPU
FIC SD11 Mainboard with 686A chipset
384MB RAM
2 x IDE Primary Master Maxtor 30GB
HDD, Secondary Master Creative 52x CD ROM
Video Card RIVA TNT2
Router
I did these configurations
RedHat Linux 8.0 in graphical mode CD
Installation (CD´s tested with linux mediacheck -->
pass)
-->Language: German
-->Keyboard layout: german (latin w/ no
deadkeys)-->tried it also (latin)
-->Installation type: Server-->tried all
other inst types
-->HDD Partition: manual with DISK
DRUID
Drive /dev/hda (Geom:
3736/255/63) (Model: Maxtor 93073U6)
I did it like u see
next:
Device:
MOUNT-POINT: TYP: FORMAT:
MB:
START: END:
/dev/hda
-->/dev/hda1
/boot
ext3 x
102
1
13
-->/dev/hda2
swap x
800 14
115
-->/dev/hda3 /
ext3
x 28404
116
3736
-->Bootloader: LILO in /dev/hda3----->tries
also /boot partition and I tried also GRUB Loader
Network:
--> automatically DHCP
Packets which I am installing:
---->tried thousends of combinations
-->X Window System
-->KDE Desktop Environment
-->Graphic Internet
-->Server Conifg. Tools
-->Web Server
-->Windows File Server
-->SQL Server
-->admin. tools
-->printer support
MY BIOS (AMIBIOS EASY SETUP UILITIES Ver:
1.17, 1998 American Megatrends)
Main|Advanced|Security|Exit MAIN: System Date System Time Floppy Drive A-->1.44mb Floppy Drive B-->not inst Primary IDE Master-->HDD Primary IDE Slave-->not inst Sec IDE Master-->CD ROM Sec IDE Slave-->not inst Auto Detect Hard Disks-->auto Boot Sector Virus Protection-->disabled Opportuneties under Advanced
ADVANCED CMOS SETUP: -->quick boot-->enabled -->1st boot device-->cdrom -->2nd boot-->ide-0 -->3rd boot-->CD ROM -->4thboot--> disabled -->try other boot devices-->no -->trend antivirus feature-->enabled -->floppy access control-->read-write -->s.m.a.r.t for hard disks-->disabled -->bootup num lock-->on -->floppy drive swap-->disabled -->floppy drive seek-->enabled -->PS/2mouse support-->enabled -->primary display-->vga/ega -->password check-->setup -->boot to OS/2 >64mb-->no -->internal cache-->write back -->external cache-->write back -->system bios cacheable-->enabled -->C000, 32k shadow-->cached -->C800, 16k shadow-->disabled -->CC00, 16k shadow-->disabled -->D000, 16k shadow-->disabled -->D400, 16k shadow-->disabled -->D800, 16k shadow-->disabled -->DC00, 16k shadow-->disabled ADVANCED CHIPSET SETUP: -->configure sdram timing by spd-->enabled -->sdram ph limit-->32 cycles (cant set anything at the moment) -->sdram idle cycle limit-->8cycles (cant set anything at the moment) -->sdram trc bank cycle timing-->3 cycles (cant set anything at the moment) -->sdram trp sras precharge-->3 cycles (cant set anything at the moment) -->sdram tras timing-->5 cycles (cant set anything at the moment) -->sdram cas latency-->3 cycles (cant set anything at the moment) -->sdram trcd timing-->3 cycles (cant set anything at the moment) -->dram integrity mode-->disabled -->dram burst refresh--> enabled -->graphics aperture size-->128 mb -->memory hole-->disabled -->pci delay transaction-->disabled -->isa bus clock-->PCICLK/4 -->ClkGen Spread Spectrum-->enabled -->ClkGen for PCI Slot-->enabled -->USB controller-->usb port 0&1 -->USB KB/Mouse Legacy Support-->disabled POWER MANAGEMENT SETUP: -->Power Management/APM-->disabled -->Green PC Monitor Power State-->suspend (cant set anything at the moment) -->video Power Down Mode-->suspend (cant set anything at the moment) -->Hard Disk Power DOwn Mode-->disabled (cant set anything at the moment) -->Hard Disk Time out (minute)-->disabled (cant set anything at the moment) -->standby time out (minute)-->2 (cant set anything at the moment) -->suspend time out (minute)-->4 (cant set anything at the moment) -->throttle slow clock ratio-->37,5-50% (cant set anything at the moment) -->modem use irq-->n/a (cant set anything at the moment) -->display activity-->ignore (cant set anything at the moment) -->irq3-->monitor (cant set anything at the moment) -->irq4-->monitor (cant set anything at the moment) -->irq5-->ignore (cant set anything at the moment) -->irq7-->monitor (cant set anything at the moment) -->irq9-->ignore (cant set anything at the moment) -->irq10-->ignore (cant set anything at the moment) -->irq11-->ignore (cant set anything at the moment) -->irq13-->ignore (cant set anything at the moment) -->irq14-->monitor (cant set anything at the moment) -->irq15-->ignore (cant set anything at the moment) -->system thermal-->ignore -->thermal slow clock ratio-->50-56,25% (cant set anything at the moment) -->Power button function-->on/off -->restore on AC/Power loss-->last state -->rtc alarm resume from soft off-->disabled -->rtc alarm date-->15 (cant set anything at the moment) -->rtc alarm hour-->12 (cant set anything at the moment) -->rtc alarm minute-->30 (cant set anything at the moment) -->rtc alarm second-->30 (cant set anything at the moment) PLUG AND PLAY SETUP: -->Plug and Play Aware O/S-->no -->clear NVRAM-->no -->PCI Latency Timer (PCI Clocks)-->64 -->Primary Graphics Adapter-->PCI -->PCI VGA Palette Snoop--> disabled -->OffBoard PCI IDE Card-->auto -->OffBoard PCI IDE Primary IRQ-->disabled (cant set anything at the moment) -->OffBoard PCI IDE Secondary IRQ-->disabled (cant set anything at the moment) -->DMA Channel 0 -->PnP -->DMA Channel 1 -->PnP -->DMA Channel 3 -->PnP -->DMA Channel 5 -->PnP -->DMA Channel 6 -->PnP -->DMA Channel 7 -->PnP -->IRQ3-->PCI/PnP -->IRQ4-->PCI/PnP -->IRQ5-->PCI/PnP -->IRQ7-->PCI/PnP -->IRQ9-->PCI/PnP -->IRQ10-->PCI/PnP -->IRQ11-->PCI/PnP -->IRQ14-->PCI/PnP -->IRQ15-->PCI/PnP -->reserved memory size-->disabled -->reserved memory address-->C8000 (cant set anything at the moment) PHERIPHERAL SETUP: -->OnBoard FDC-->enabled -->OnBoard Serial Port1-->3F8/COM1 -->OnBoard Parallel Port-->378 -->Parallel Port Mode-->normal -->EPP Version-->n/a (cant set anything at the moment) -->Parallel Port DMA Channel-->n/a (cant set anything at the moment) -->Parallel Port IRQ-->7 -->OnBoard IDE-->both Filesystems will be formatted / and /boot without problems. After that the installationimage is written on the
HDD --> machine freeze (cant do nothing, must reeboot manually, no
alert)
I also tried text mode installation. Same
prob.
What is my fault?
THX
Alex |
