Dear All,
With successfully , I had already installed Redhat Linux 8.0 and Network
invironment is also okay. I had already kept IPDDR, HOSTNAME, NETMASK,
GATEWAY etc. everything is ok
Now, I wanna to install/setup Proxy server or Cache server in my
computer. I know that "squid" program is stand f
Try https://rhn.redhat.com/errata/rh9-errata.html and look for the Athlon
kernel.
Alternatively, look on Google for 'Red Hat' and 'Athlon' and you should be
okay.
Andy
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 12, 2003 3:03 PM
To: [EMAIL P
On Fri, 2003-06-13 at 23:26, santosh wrote:
> Now, I wanna to install/setup Proxy server or Cache server in my
> computer. I know that "squid" program is stand for proxy server.
>
> But I don't know how to get it ?? then after I don't know to configure
> or setup for the proxy or cache server ?
F
Toralf Lund wrote:
Please refer to the below Q & A from the USB FAQ. One of our customers
is seeing this behaviour right now. The weird bit is that the setup has
worked in the past, and as far as I know, the hardware or BIOS (or OS
installation) haven't changed at all. Any ideas what might caus
On Fri, 2003-06-13 at 10:51, Peter Peltonen wrote:
Forgot to mention: If you so new to Red Hat Linux that you do not know
how to install software from RPM etc, please consider reading the very
informative Red Hat Linux Manuals found at
http://www.redhat.com/docs/manuals/linux/
(actually you shou
In GNOME Desktop go to the GNOME Control Center, and
in KDE desktop in kontrol-panel
--- John Simovic
<[EMAIL PROTECTED]> escribió: > Not
Gnome to KDE please
>
>
> Kind Regards
>
>
**
> This message is intended for the address
Hello,
I am writing a script to determine if a serial mouse is connected to the local system.
So far I have:
#!/bin/bash
SMOUSE=$(/bin/grep -i "serial" /etc/sysconfig/mouse)
if [ $SMOUSE = "" ]; then
echo "There is not a serial mouse attached to this system."
else
echo "A serial mouse is a
did rh remove the erstwhile displaymanager switching gui? i don't see
it in rh9.
anyway who cares just put
DISPLAYMANAGER=KDE
(or GNOME or XDM)
into /etc/sysconfig/desktop
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
By default squid almost works out of the box
Installation
there are two ways of installing squid. The tar file requires configuration, but the
documentation is excellent. the other way is the RPM file. This may not be the most up
to date version but it will be close. Try getting the RPM from
ht
On 9 Jun 2003 at 18:34, Gordon Messmer wrote:
> Scarletdown wrote:
> > On 9 Jun 2003 at 0:05, Gordon Messmer wrote:
> > have the most experience with). I may convert my MINIX box into a dual-boot
> > MINIX/Slackware system soon though,
>
> You have a MINIX box? 8)
Well, up until just a few ho
i am new in linux .
right now i am using RedHAT7.3
got my smb.conf configured as follows.
#
#=== Global Settings
[global]
log file = /var/log/samba/%m.log
dns proxy = no
netbios name = Linux
netbios aliases = Linux
server
Dear All,
With successfully , I had already installed Redhat Linux 8.0 and Network
invironment is also okay. I had already kept IPDDR, HOSTNAME, NETMASK,
GATEWAY etc. Now, Can do a remote terminal access.
Now, It's needed to install/setup Proxy/Cache server.
Regarding in that matter :
Shall I nee
* Matthew Richards
> Hello,
>
> I am writing a script to determine if a serial mouse is connected to the local
> system. So far I have:
>
> #!/bin/bash
> SMOUSE=$(/bin/grep -i "serial" /etc/sysconfig/mouse)
> if [ $SMOUSE = "" ]; then
>echo "There is not a serial mouse attached to this system.
On Fri, 2003-06-13 at 12:22, root_sharif wrote:
> but still i don't know how to access my Windows BOXES from my linux box.
Are your Windows boxes also in a workgroup called WORKGROUP?
For accessing the Windows boxes from Linux, try smbclient (for a FTP like UI) or, if
you want to mount them like
* root sharif
> but still i don't know how to access my Windows BOXES from my linux box.
> or ...the vise versa...
> what are the next steps.. i should follow???
> pls let me know.
I'll recommend you to read one of the many tutorials on samba laying
around on the Internet or on your own /usr/share
What is the best method of setting up JabberD on Redhat?
I have got the source of JabberD, and am building that, but I had a thought
that there may be a more "Redhat" way...
Cheers,
Ben
-Original Message-
From: Jon Haugsand [mailto:[EMAIL PROTECTED]
Sent: 13 June 2003 10:30
To: [EMAIL
On Fri, Jun 13, 2003 at 02:08:11AM -0700, Scarletdown wrote:
> On 9 Jun 2003 at 18:34, Gordon Messmer wrote:
>
> So now, I have a SuSE 6.1 install in progress on that system. Picked up
> the SuSE package at Goodwill a couple days ago for a fiver, and figured
> that this would be a good time to
Hi all,
I applied a host of patches from red-carpet recently to my base 7.3
installation. Since doing so, updatedb blows up every time with "broken
pipe". From looking at the behaviour - it runs for a long time and the HDD
reads furiously and the CPU does a bit of work too; so I think its when it
I have messed about with Jabber servers a few times, always installing from
source. As far as I know there isn't an rpm available, but I could be
wrong. If you were going to install it numerous times on RedHat boxes then
you could roll your own rpm, it's not that hard.
Gordon
-Origina
Why don't you get a rpm for RH9?
--- "Hill, Benjamin W" <[EMAIL PROTECTED]>
escribió: > What is the best method of setting up
JabberD on
> Redhat?
>
> I have got the source of JabberD, and am building
> that, but I had a thought
> that there may be a more "Redhat" way...
>
> Cheers,
>
> Ben
>
Here there some rpm packages
http://rpmfind.net/linux/rpm2html/search.php?query=jabber
--- Gordon McDowall <[EMAIL PROTECTED]>
escribió: >
> I have messed about with Jabber servers a few times,
> always installing from
> source. As far as I know there isn't an rpm
> available, but I could be
>
What error message do you get?
This problem may be related to the windows registry patch you need to apply
for certain smb configurations. Just do a google for samba windows registry
and I'm sure you'll find what you are looking for.
-Original Message-
From: root_sharif [mailto:[EMAIL PRO
They are all Jabber packages, not the JabberD server...
Cheers,
Ben
-Original Message-
From: Manuel Aróstegui Ramirez [mailto:[EMAIL PROTECTED]
Sent: 13 June 2003 11:54
To: [EMAIL PROTECTED]
Subject: RE: JabberD Setup on Redhat
Here there some rpm packages
http://rpmfind.net/linux/rpm
Hi guys,
Where to download gvim package for redhat 8.0, please suggest the links
Thanks & Regards,
santosh
Ph: 5202424, 5273061 ext 102
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi,
On Fri, 13 Jun 2003, santosh kumar wrote:
> Where to download gvim package for redhat 8.0, please suggest the links
http://www.rpmfind.net/linux/rpm2html/search.php?query=gvim&submit=Search+...
and maybe
http://www.google.com/linux?hl=tr&ie=ISO-8859-9&q=gvim+rpm+download+redhat&btnG=Goog
Hello!!!
I´d like to know how can i insert PCL commands in text
printers.
I have a printer with a five bin mailbox installed (a
kind of output tray) and i need to insert commands to use it!!!
Can you help me???
Thanks
Luis
Hi,
I recenltly moved around my home directory. Previously it was in /rdonald
(separate partition), and then I move it to /home/rdonald. I logged in as
root, and edit /etc/passwd and put my home dir as /home/rdonald there.
However, I forgot to copy some files from the old home before I deleted
Hi,
Can you please let me know the equivalent packages on Linux that can
provide similar features that are available by the following packages on
Windows or else are these packages available on linux if so what could be
the source of the same:
1) MSProject 2000
2) Visio 2000 Professional
3) V
Hi,
Rpm -qa|grep vim the result is
vim-common-6.1-14
vim-minimal-6.1-14
vim-enhanced-6.1-14
and if I try to install rpm -ivh gvim-6.0-64.i386.rpm
error: Failed dependencies:
vim is needed by gvim-6.0-64
is vim should be same version of gvim, I tried to download but nowhere I
got gvim pac
See below...
1) MSProject 2000
Don't Know - Possibly some of the office things such as CrossOver Office
etc...
2) Visio 2000 Professional
Don't Know - Possibly some of the office things such as CrossOver Office
etc...
3) VC ++
There are tonnes of IDEs available and you should have all the compiler
Hello all,
I'm not being able to implement a RewriteRule in apache and would like
some help of you.
I want all access to files in a specific directory to be done through a
php script. For example, if the users access doc/node1.html, I want it
to be changed to doc/script.php?fileName=node1.html
I
Hi all,
Do you know if I can contract some kind of e-mail support from redhat? I
searched on redhat's site but I only saw "phone support" - what's not
interesting for me since I don't speak english (although I can write it
well).
Any tip will be apreciated.
---
Hi All,
Whenever I upgrade glibc to 2.3.2... my app starts to crash.
Everything works fine until I relink a specific shared library. I am
using RH8 but we had the same problem on a new RH9 system.
What bugs me is that all the other applications seem very stable. The
only app affected by this upg
Hi,
On Fri, 13 Jun 2003, santosh kumar wrote:
> and if I try to install rpm -ivh gvim-6.0-64.i386.rpm
> error: Failed dependencies:
> vim is needed by gvim-6.0-64
> is vim should be same version of gvim, I tried to download but nowhere I
> got gvim package..
> please suggest some tips
On Friday 13 June 2003 09:21 am, [EMAIL PROTECTED] wrote:
> Hi,
>
> Can you please let me know the equivalent packages on Linux that can
> provide similar features that are available by the following packages on
> Windows or else are these packages available on linux if so what could be
> the sourc
Telelogic is on Linux as well ...
Regards
Jerome
>>> [EMAIL PROTECTED] 6/13/03 7:02:16 PM >>>
See below...
1) MSProject 2000
Don't Know - Possibly some of the office things such as CrossOver
Office
etc...
2) Visio 2000 Professional
Don't Know - Possibly some of the office things such as CrossOve
I need some direction on setting up a VPN client for my home Linux boxes. I
am running RH7.3 on one and RH9 on another. Both machines connect to the
net through a Linksys router. I would like to connect to my work VPN
server. The server at work is running Linux 6.2 but I do not know how the
VP
1) MSProject 2000
Check out Mr. Project
2) Visio 2000 Professional
Check out Kivio, Dia or OpenOffice.org Draw program
--
*Eduardo Silva*
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
John McKinney wrote:
On Thu, 12 Jun 2003, Joseph A Nagy Jr wrote:
Joseph,
Although I no longer have the device in question (got pissed and gave it
to my future bro-in-law), I have some questions that I'd like answered
before I blow another $20-$40 on a USB PCI card.
I'd agree. You need
On Friday 13 Jun 2003 2:16 pm, Luis Gustavo Dantas wrote:
> Hello!!!
>
> I´d like to know how can i insert PCL commands in text printers.
>
> I have a printer with a five bin mailbox installed (a kind of output tray)
> and i need to insert commands to use it!!!
I used to have a Toshiba network pri
Could you explain it better? I want to prevent the same problem.
Fred Whipple wrote:
I would actually recommend using a full Linux distribution on a CD type
distributions instead. I have a GREAT one that I have no idea what the
name is :-) But it fits on a 3" 250MB CD-RW (I think it's a whole
Hi all,
I just installed the redhat 9.0 and I'm facing this strange problem - when
Iopen an application, say the gnome-terminal, if I minimize it the
application window disappear, instead of keep standing in the toolbar. I
checked that the application's process still keeps alive - it wasn't
termin
On Fri, Jun 13, 2003 at 06:18:05PM +0530, santosh kumar wrote:
>
> Where to download gvim package for redhat 8.0, please suggest the links
Install the vim-X11 package from the RHL 8.0 CDs.
Those contain gvim.
Emmanuel
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://ww
When you click on the toolbar, does it give you a list of the processes that
are open?
-Original Message-
From: Bruno Negrao [mailto:[EMAIL PROTECTED]
Sent: Friday, June 13, 2003 3:18 PM
To: [EMAIL PROTECTED]
Subject: REDHAT9: Applications disappear when I minimize them
Hi all,
I just i
Hello,
I need to compile the CUPS (Commom Unix Printing System) package.
How can i start???
Thanks!!!
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hello,
I am trying to set up my RH linux 7.3 as a print server using samba. I want it
so that even guest user that does not have an account in the linux machine
can print to it as well.
I read through the samba configuration from RH 7.3 manual in redhat website,
and looked at the Un-official
Andrew,
It sounds like you might need to add the the "window list" applet to
your gnome panel. Right slick on your gnome panel (down at the bottom of
your screen usually), select, "add to panel", select "utility" and then
select "window list".
Hope that helps,
Matt
On Fri, 2003-06-13
Thanks for reply guys, problem is solved actually I was not aware that
vim.tar itself installs gvim..
Regards,
santosh
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Emmanuel Seyman
Sent: Friday, June 13, 2003 7:46 PM
To: [EMAIL PROTECTED]
Subject: Re: g
has anybody a hpt372a raid controller working in combination with red hat
9.0 and kernel version 2.4.20-18.9 in raid mode? Because i upgraded my
kernel and i can't find any drivers for this version kernel previous drivers
are incompatible with this kernel
--
redhat-list mailing list
unsubscribe
This has worked for me for a year.
Try these:
[global]
map to guest = Bad User
guest account = nobody
guest ok = Yes
load printers = yes
use client driver = yes
[printers]
browseable = no
guest ok = yes
printable = yes
public = yes
-Original Message-
Fr
Download the tarball
Unpack the tarball
cd into cups source dir.
./configure
make
make install
-Original Message-
From: Luis Gustavo Dantas [mailto:[EMAIL PROTECTED]
Sent: Friday, June 13, 2003 10:25 AM
To: Red Hat List
Subject: I need to compile CUPS.
Hello,
I need to compile the CU
It depends on what features you are using.
> 1) MSProject 2000
MrProject is a basic project application, but there are far better
web-based ones if you search Freshmeat. phpgroupware has at least some
project-tracking capabilities.
> 2) Visio 2000 Professional
Which features are you using? Fo
has anybody a
hpt372a raid controller working in combination with red hat9.0 and kernel
version 2.4.20-18.9 in raid mode? Because i upgraded mykernel and i can't
find any drivers for this version kernel previous driversare incompatible
with this kernel
On Friday 13 June 2003 04:40 am, Matthew Richards wrote:
> Hello,
>
> I am writing a script to determine if a serial mouse is connected to the
local system. So far I have:
>
> #!/bin/bash
> SMOUSE=$(/bin/grep -i "serial" /etc/sysconfig/mouse)
> if [ $SMOUSE = "" ]; then
>echo "There is not a
I'd like configure a backup mail server for my domain. The backup mail
server is a RedHat box in another domain. It would seem I need to do the
following:
1) Create a higher numbered MX record in my domain's dns entry that points to
the backup mail server.
2) On the backup up mail server, c
It seems that I read somewhere that Linux will not run on notebooks that
contain Intel's new Centrino CPU. Has anyone tried to load RH9 onto a
Centrino, and if so, was it successful?
Thanks,
BDavis
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/
--- Molnar Peter <[EMAIL PROTECTED]> wrote:
> Redhat 8 hasn't got the NTFS kernel module compiled
> in. This means that
> you can't do that on rh8.
>
> Regards:
> MP
But you can always recompile your kernel to include
the support or make the NTFS modules. Lastly, you
could get the lastest NTF
Hi
I don't know if this subject was already discussed in this
group but me
I didn't find the information on my problem.
I have a small network with 5 computers and I want to share
ADSL internet connection that is in a computer with RH 9.0.
The connection to the in
Due to lack of quota configuration and proper partitioning on my part, my
/var partition filled up last night around 3:00 AM from a handful of 50M
mail spools. (Yeah, lets check "Leave mail on server", grar). Anyway. I
don't have an extra hard drive to throw in the machine to put /var on. NFS
i
I think that your office server is a pptp one
install the pptp client for linux (see the PopTop site at
http://www.poptop.org/)
hth
A 09:51 13/06/2003 -0400, vous avez écrit :
>I need some direction on setting up a VPN client for my home Linux boxes. I
>am running RH7.3 on one and RH9 on anothe
I had to setup /var as a symbolic link after letting RH7.2 decide my
partition layout during the install (and not paying attention to the
fact that it made it ~100 Megs which wasn't quite enough for the 256
Megs of packages up2date wanted to download).
It worked fine for me until I got around to r
On Fri, Jun 13, 2003 at 04:47:56PM +0100, Arnaldo Bento wrote:
>
>
> I have a small network with 5 computers and I want to share
> ADSL internet connection that is in a computer with RH 9.0.
This is very well described in the IP-Masquerade Howto:
http://www.tldp.org/HOWTO/IP-Masquerade-HOW
I've had to do similar things many times before, and it always works.
The one thing is if you are using Postfix, it does some, well, interesting
checks tfor directory security before it runs, so that _could_be a
problem, but I think it only spits out warnings.
Jon
On Fri, 13 Jun 2003, Billy wrot
On 06/13/03 09:34 -0400, Reuben D. Budiardja wrote:
>
> Hi,
> I recenltly moved around my home directory. Previously it was in /rdonald
> (separate partition), and then I move it to /home/rdonald. I logged in as
> root, and edit /etc/passwd and put my home dir as /home/rdonald there.
>
> Howev
Every time I start RHN up2date I get the notification "your system is
currently running kernel-2.4.20-8 but the newest installed kernel is
kernel-2.4.20-18.9. It is recommended that you reboot at the first
opportunity to test this new kernel."
uname -a gives 2.4.20-8 i686 athlon i386 GNU/Linux
I
Hi
I don't know if this subject was already discussed in this group but me
I didn't find the information on my problem.
I have a small network with 5 computers and I want to share
ADSL internet connection that is in a computer with RH 9.0.
The connection to the internet is made w
Anyone have any ideas?
I seem to be getting this more and more frequently.
I found one solution that suggested to use 'hdparm -d1 /dev/hda'.
1. Who else has had this problem and what did you do to solve it?
2. Why does it happen in the first place?
3. Do I need to execute the command above each
I'm fixing to update to RH 9 from RH 7.2 (via cd's a friend sent). Is
there anything I need to worry about during this upgrade?
--
Wielder of the mighty +1 LARTsaber of Unsubscribe Instructions At End of
Message,
the +3 Clue-by-Four of No Attachments to a Mailing List,
and the -4 Shield of No Spe
Syl wrote:
Every time I start RHN up2date I get the notification "your system is
currently running kernel-2.4.20-8 but the newest installed kernel is
kernel-2.4.20-18.9. It is recommended that you reboot at the first
opportunity to test this new kernel."
uname -a gives 2.4.20-8 i686 athlon i386 GNU
Hi list,
Small issue with my CDROM drive, when I try to install rpm's or other
programs from my CDROM drive sometimes it just hangs. I mean the drive
hangs, it stops spinning at high speed and just tries to seek and goes
nowhere, it always results in the application calling the CDROM drive
Does anyone know the file descriptor limit on RH9? Thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi,
You have to configure your RH9 machine as a Gateway. This can be done
with iptables or ipchains.
You can check the following page for some scripts that will configure
your machine as a gateway.
http://www.linuxguruz.com/iptables/
Good luck!
On Fri, 2003-06-13 at 12:31, Arnaldo Bento wrote:
Hi,
This looks like your drive does not support DMA access.
Check if it is enable with the following (as root)
hdparm /dev/hda
it should report an output looking like this:
/dev/hda:
multcount= 16 (on)
IO_support = 3 (32-bit w/sync)
unmaskirq= 0 (off)
using_dma= 1 (on)
kee
Hey gang,
Last week someone posted a question about console font size.
There were a couple of reactions on how to reduce or change the font size on the
console.
I thought that I had moved the solution/suggestion to a safe place but - you guessed
it, I didn't.
Does anyone have the solution s
Hi,
I found that a certain program took 4 min to startup - then I replaced the
drive with a 7200 rpm and 2mb cache on board - now it take 1 min.
Same Pc same cpu.
So drive performance makes a BIG difference.
Johan
- Original Message -
From: "Marcos de Souza Trazzini" <[EMAIL PROTECTED]>
T
On Wed, 11 Jun 2003 13:41:52 -0400, Michael H. Warfield wrote
> On Mon, Jun 09, 2003 at 12:56:35PM -0600, Mike Vanecek wrote:
> > I have been gone for a month and notice that I am now getting packets for port
> > 901 (Samba Swat) from all over the world (see sample of packets below). I run
> > Samb
I have a squid server that provides www and ftp access to an internal
network but I need to limit the bandwith. In order to do that I have to set
the limits on the eth interface that goes to local net or on the interface
the goes to internet? I think that I sould set cbq on the interface to local
n
i've just installed the redhat 9 (Shrike) on a new hard drive and i get
these errors on boot:
Journalled Block Device driver loaded
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: dma_intr: status=0x51 { DriveReady SeekComplet
Please give us more details about your other computers
and which servicies are they running
--- Arnaldo Bento <[EMAIL PROTECTED]> escribió: >
Hi
>
> I don't know if this subject was already discussed
> in this group but me
>
> I didn't find the information on my problem.
>
> I have a sm
If your using squid setup the delay pools. That's what there for.
-Original Message-
From: Alex [mailto:[EMAIL PROTECTED]
Sent: Friday, June 13, 2003 3:55 PM
To: [EMAIL PROTECTED]
Subject: squid and cbq
I have a squid server that provides www and ftp access to an internal
network but I
:-) Yeah - that's right! Now the applications don't disappear anymore
hahahahahaha
Wouldn't it be enabled by default??
Thank you very much,
Bruno Negrão.
- Original Message -
From: "Matt Ryanczak" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 13, 2003 11:41 AM
Subject:
I successfully reduced the overall size of my desktop items when I entered
in the "Display" configuration tool(from the System Settings menu) and I
changed the amount of colors from "Millions of colors" to "Thousands of
colors". This was what reduced all the stuff.
But if you want to particularly
Quoting "Reuben D. Budiardja" <[EMAIL PROTECTED]>:
when you 'log in', it is not .bashrc which gets executed, but .bash_profile
.bashrc is executed when you open an xterm (or some other term emulator), when
you `su` or in some other instances, as when you telnet or ssh.
maybe if you do a link fro
Setup a LAN something like : - take a Hub /Switch 8 ports( i donno if you
can find a smaller one,or anyways as small as you need ,it goes like
4-8-...) one internal addres for your redhat 9 & an IP along with that
,something like :
-"manuel.local ( that will be your address ) & the Ip To go with t
Hi, I recently leased a dedicated server and asked for four additional IP's
to be allocated to my machine (it came with 2). I told them I'd install the
IP's myself because I've done it before, however I think I've only done it
on RH 7.2 systems, this new box being 7.3.
Anyhoo, these are the instr
On Fri, 2003-06-13 at 12:55, Angelo wrote:
> i've just installed the redhat 9 (Shrike) on a new hard drive and i get
> these errors on boot:
>
> Journalled Block Device driver loaded
> hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdc: dma_intr: error=0x84 { DriveStatusError BadCR
I have an ATI Rage 128-series card. I'm pretty sure it's the Fury Pro, but
RH keeps insisting it's a standard Rage 128. Either way, there doesn't
seem to be a way to enable 3D acceleration or OpenGL support through
redhat-config-xfree86. Has anyone been able to get 3D accel. to work with
this c
Some additional info about my configuration:
$ lspci
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128
PF/PRO AGP 4x TMDS
>From /etc/X11/XF86Config:
Section "Module
The only dependable way I've found to make messages from Outlook
and Exchange truly plain text is, in the Message window, pull
down the File menu and click Properties, then Send Options.
Under Attachment Format, select UUEncode.
No, of course it doesn't make sense, but it works, one message at
I was wondering if someone could tell me the syntax to
remove a Kernel? My /boot is filling up and I cleaned it out but will need to
remove the kernel rpm’s correct?
Don
On Friday 13 June 2003 21:54, Alex wrote:
> This is a puzzle for me, so maybe if you guys have any hints on how to do
> this, you will share that with me.
>
> Thanks.
>
> Alex
Try giving a look here http://lartc.org/howto/
Section 9 'Queueing Disciplines for Bandwidth Management'
Achille
--
It depends on what you want to do, which version of RH you use, and
which printing system you use. If you want to add differenct pcl
commands to different text files and print you can add them as
escape sequences with vi you just add them with crtl-v esc then
the command however the magic filter ma
Are you setting the ip's on the other machines statically? If not, you
can set up a dhcp server. Does this Siemens modem have an ethernet
connection? If so, there are plenty of howto's out there for this.
You'll need two NIC's in the Linux box...eth0 connected to the DSL
modem, and eth1 for
Don Leeper wrote:
I was wondering if someone could tell me the syntax to remove a Kernel?
My /boot is filling up and I cleaned it out but will need to remove the
kernel rpm?s correct?
Do a 'rpm -q kernel' first to find out all of the different kernels on
your system. If you have more than one,
I've been looking for an answer to a question, but haven't seen anything
that helps me understand what to do...
I'm running a mixture of RedHat and Mandrake machines in a Samba
supported network. Too late, I learned that the two distro's do not
default to the same starting number when first creati
>>> On Fri, 13 Jun 2003 19:34:35 -0400, Technoslick <[EMAIL PROTECTED]> said:
t> I've been looking for an answer to a question, but haven't seen anything
t> that helps me understand what to do...
t> I'm running a mixture of RedHat and Mandrake machines in a Samba
t> supported network. Too lat
Hello.
I'm trying to get my firewall (SonicWall SOHO3) to send it's log data to my linux box.
So far I'm running around like a chicken with it's head cut off.
I read that syslogd should be started with the -r command. According to 'ps aux|grep
syslog' it is not and I can't find the file that sp
On Fri, 2003-06-13 at 19:49, Johnie Stafford wrote:
> >>> On Fri, 13 Jun 2003 19:34:35 -0400, Technoslick <[EMAIL PROTECTED]> said:
>
> t> I've been looking for an answer to a question, but haven't seen anything
> t> that helps me understand what to do...
>
> t> I'm running a mixture of RedHat
Hi Everyone,
Is posible to rotate by 90 degrees the Xserver showed window?. I'm going to use a 16:9 Plasma Display, and I'd like install it verticaly.
I know that in the Windows environment, there is an application called Pivot Pro that will allow me to do this.http://personalcomputing.portrait.
What RH distribution are you using. The explanation I
give will be for RH7.3.
First, you should read the man pages for syslogd and
syslog.conf. It gives a decent explanation.
To set the syslogd options upon system startup use
/etc/sysconfig/syslog and set the SYSLOGD_OPTIONS
variable. The /etc
1 - 100 of 109 matches
Mail list logo
