Re: [RE-wrenches] Dial torque wrench for S-5 Clamps

Yes, the angled set screw is a huge help. We use a lot of S-5-S and S-5-U here, but S-5-N is becoming more popular. It boils down to a combination of the "right" clamp and which one has load test results. Some seams accommodate multiple clamp types. On Sun, Jun 13, 2021, 8:51 PM Nick A Lucchese w

Re: [RE-wrenches] J Box adhesive failure.

Hi John, I like polyurethanes for this sort of thing. They are substantially stronger than RTV, and if you need to re-do it, you won't be left with that oily texture that nothing else will stick to. "3M Marine Adhesive Sealant Fast Cure 4000 UV" might be a good choice, and Sikaflex also makes so

Re: [RE-wrenches] J Box adhesive failure.

Agree with All that Alex wrote! I will add that most of my clients are extreme rural and remote. I have been using a sealent that they can get in small town hardware store for 5 years now. It is by Lock-tite and is polyurethane. It takes a day to skin over. It is water tight as soon as it goes on

Re: [RE-wrenches] Magnum MM1524AE rebuild?

Hi Drake, So it's simply a momentary bypass circuit from the Load side to the Line side of your Main Inverter Breaker.  So from battery side of inverter to momentary on-off switch to resistor to inverter side of breaker. I used a 25 Ohm 50 watt resistor.this one

Re: [RE-wrenches] Magnum MM1524AE rebuild?

oh and of course I put an inline fuse in the circuit. The current that flows of course will be dependent on battery voltage and resistor ohms.  So with a 48 VDC pack you could go up in resistance - just figure per ohm - volt - amp formulas/calculator here.

[RE-wrenches] Hail damage

Hi folks: Does anyone have a pair of the Sharp ND-240 QCJ modules; how about six of the Kyocera 175GTs? If so, please feel free to contact me off list. Best, ___ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wr