Hey Folks,
Why am I having such a difficult time finding a Grundfos
distributor that can help me with a pump design for a new well? Their
website seems clunky for getting info Static at 25 feet, drilled to 340
feet to hit 30+ GPM. We would like to have 25 GPM at 40 psi, pump set
HI All,
Any advice or recommendations for battery based 2-5kw wind machines?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wr
I am planning a battery backup system using Fortress 18.5kWh eVaults. Due
to flood level requirements, these are going to need to be mounted about 48
inches above the garage floor on a shelf/platform. That puts the tops of
the battery cabinets well above 6'7". But I believe that these do not fall
u
I'm looking for two 54-cell modules, highest power possible, for a mobile
solar project requiring modules under 61 inches long. If you know where I
can get these, please let me know off-list.
Jason Szumlanski
Florida Solar Design Group
___
List sponsored
I use some older software from Grundfos called WinCAPS v 7.8 for pump sizing.
It works well. I am only focused on the SQFlex systems, so have not used the
other modules but believe it will do the calculations you wish. You may be able
to find that software online to download. If not, I could try
Hey All wise ones,
I have an old B&S gas powered Troy Built Roto tiller that the safety
switches are years past available. I would like to convert this monster to
electric drive.
Any suggestions or anyone know of someone who has done this?
I hate to reinvent the wheel if someone has this i
I recall seeing something like that in an old Home Power magazine
article. I've done a few odd ball conversions, and that seems like a
good one to play with. Its not a "daily driver", not going long
distances or long hours, weight isn't a huge issue, and so lead acid
batteries might not be ou
Hi Jason,
There is a 250A breaker located inside a compartment on the top of the
unit. Keeping that reasonably accessible would be important.
Also, just out of curiosity, how are you planning of getting these battery
cabinets onto their 4’ platform? Forklift? Ramp?
On Fri, Mar 26, 2021 at 3:40 P
Earthquake safety requirements in CA. Probably not an issue in Florida.
Ask your building department!
Dave Angelini Offgrid Solar
"we go where
powerlines don't"
http://members.sti.net/offgridsolar/ [1]
e-mail
offgridso...@sti.net [2]
text 209 813 0060
On Fri, 26 Mar 2021 19:08:18
-0400, Chris
9 matches
Mail list logo
