Hi Jason, There is a 250A breaker located inside a compartment on the top of the unit. Keeping that reasonably accessible would be important.
Also, just out of curiosity, how are you planning of getting these battery cabinets onto their 4’ platform? Forklift? Ramp? On Fri, Mar 26, 2021 at 3:40 PM Jason Szumlanski < ja...@floridasolardesigngroup.com> wrote: > I am planning a battery backup system using Fortress 18.5kWh eVaults. Due > to flood level requirements, these are going to need to be mounted about 48 > inches above the garage floor on a shelf/platform. That puts the tops of > the battery cabinets well above 6'7". But I believe that these do not fall > under the working space requirements of NEC 110.26 since they are not > likely to require maintenance. In fact, could these be mounted even higher, > say way up near the 14' ceiling (subject to manufacturer spacing > requirements)? > > Can anyone see any code problems with this approach, putting aside the > practical problems with mounting heavy battery cabinets well above grade? > > Jason Szumlanski > Florida Solar Desing Group > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- *Chris Sparadeo* *NABCEP Certified PV Installation Professional **® **# 042919-015652* *NABCEP Certified PV System Inspector **®** # 052920-015652 * Catamount Solar, LLC 4 Randolph Ave., Randolph, VT 05060 C_(802) 369-4458 O_(802) 728-3600 www.CatamountSolar.com <http://www.catamountsolar.com/>
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
