Re: [RE-wrenches] Bi-Facial or transparent modules

I'm curious about this, too. I'm looking for something that accepts MLPE bolted to the frame and has a good wind rating. Jason Szumlanski Florida Solar Design Group On Thu, Jan 3, 2019 at 2:19 AM Wayne Irwin wrote: > Does anyone have a source for bi-facial or double glass modules with > frames

Re: [RE-wrenches] Bi-Facial or transparent modules

I think LG is still producing some. You could also try Lumos but they are quite expensive. Chad Waits President/Owner ­ Net Zero Solar 101 W. 5th St., Tucson, AZ 85705 Office: 520-207-4053 Cell: 520-270-4873 NABCEP Certified PV Installation Professional From: RE-wrenches on behalf of Wayne I

Re: [RE-wrenches] Bi-Facial or transparent modules

I have used these below. The last final issue of solar pro had a great article on bifacial. On a tracker in the snow or sand they are pretty amazing if done right. The old Sanyo bi facials had water problems. https://www.prismsolar.com/ Dave Angelini Offgrid Solar "we go where powerlines don't

[RE-wrenches] VFX blinking error codes

Hi,Usually very successful with just replacing control and ac boards in older vfx to bring them up to compatibility with Mate 3 or 3s. When testing with 3 nine volt batteries, this one gives error code of ac and error blinking 3 times and batt low on 4th blink. Relay indicator also flashing, and ve

Re: [RE-wrenches] VFX blinking error codes

Not sure, but maybe the fan wire got damaged during the board replacement?  The wires are really tight and delicate.  I would think when it ran through its start up check and didn't have fan operation it would mess it up. Ray Walters Remote Solar 303 505-8760 On 1/3/19 7:41 PM, br...@willpowe

Re: [RE-wrenches] VFX blinking error codes

Check for bent, mashed over or missing pins between ribbon cables and boards.Dan BrownFoxfire Energy Corp.Renewable Energy Systems(802)-483-2564www.Foxfire-Energy.com Original Message Subject: Re: [RE-wrenches] VFX blinking error codes From: Ray Date: Thu, Ja

[RE-wrenches] VFX blinking error codes

be sure your 9V batts are fresh.. lame batts will spit out low DC errorsDan BrownFoxfire Energy Corp.Renewable Energy Systems(802)-483-2564www.Foxfire-Energy.com ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Chan