Not sure, but maybe the fan wire got damaged during the board
replacement? The wires are really tight and delicate. I would think
when it ran through its start up check and didn't have fan operation it
would mess it up.
Ray Walters
Remote Solar
303 505-8760
On 1/3/19 7:41 PM, br...@willpowerelect.com wrote:
Hi,
Usually very successful with just replacing control and ac boards in
older vfx to bring them up to compatibility with Mate 3 or 3s. When
testing with 3 nine volt batteries, this one gives error code of ac
and error blinking 3 times and batt low on 4th blink. Relay indicator
also flashing, and vent fan does not come on. Ribbon cables are both
new and well seated. Does anyone know what this code means?
Thanks!
Bruce Fiero-RMI
"Energizing the Rogue Valley"
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
