Re: [RE-wrenches] Trackers

2018-09-07 Thread Jay
Hi Chris, In regards to wattsun, which controller are they using? The website doesn’t give any details. The last one I did used a quite complicated one and it didn’t have easy to use external manual controls. Thx Jay Peltz power. > On Sep 6, 2018, at 1:13 PM, Chris Schaefer wrote: > > Ch

Re: [RE-wrenches] Trackers

2018-09-07 Thread Ray
4300 c 484 560 4666 NABCEP certified installer PA contractor #44411 www.berkssolar.com <http://www.berkssolar.com> *From:* "ch...@oasismontana.com <mailto:ch...@oasismontana.com>" mailto:ch...@oasismontana.com>> *To:* 'RE-wrenches' <mailto:re-wre

Re: [RE-wrenches] Trackers

2018-09-07 Thread RE Ellison
d have to upsize the Fronius inverters. My design mistake. I >>> typically oversize the array to the inverter, but in the spring, the arrays >>> were always clipping. >>> >>> Folks do like to watch the slow dance of the modules. >>> >>>

Re: [RE-wrenches] Trackers

2018-09-06 Thread Ray
staller PA contractor #44411 www.berkssolar.com <http://www.berkssolar.com> *From:* "ch...@oasismontana.com <mailto:ch...@oasismontana.com>" mailto:ch...@oasismontana.com>> *To:* 'RE-wrenches' <mailto:re-wren

Re: [RE-wrenches] Trackers

2018-09-06 Thread Allan Sindelar
nnial Rd > Mertztown, PA 19539 > > o 610 682 4300 > c 484 560 4666 > NABCEP certified installer > PA contractor #44411 > www.berkssolar.com > > > From: "ch...@oasismontana.com" > To: 'RE-wrenches' > Sent: Thursday, September 6, 2018 3:37 PM > S

Re: [RE-wrenches] Trackers

2018-09-06 Thread Dave Angelini Offgrid Solar
I like Array Tek and for offgrid. It is a waste to dual axis track. Less is more! All you need is the array point at the sun with enough tilt to shed snow. Again, Less is more. If it had a failure (and none of mine have) it is still a fixed array until it is repaired. Dave Angelini Offgrid Solar

Re: [RE-wrenches] Trackers

2018-09-06 Thread Bill Hennessy
PA 19539 o 610 682 4300 c 484 560 4666 NABCEP certified installer PA contractor #44411 www.berkssolar.com From: "ch...@oasismontana.com" To: 'RE-wrenches' Sent: Thursday, September 6, 2018 3:37 PM Subject: Re: [RE-wrenches] Trackers #yiv8033290025 #yiv8033290025

Re: [RE-wrenches] Trackers

2018-09-06 Thread Chris Schaefer
ractor - # 028765 Idaho PV # 028374 > > NABCEP # 051112-136 www.solarwork.biz > > *"Responsible Technologies for Responsible People since 1988" * > > *P* Please consider the environment before printing this email. > > > > > &g

Re: [RE-wrenches] Trackers

2018-09-06 Thread chris
"Responsible Technologies for Responsible People since 1988" P Please consider the environment before printing this email. From: RE-wrenches On Behalf Of Chris Schaefer Sent: Thursday, September 06, 2018 8:27 AM To: RE-wrenches mailto:re-wrenches@lists.re-wrenches.org> >

Re: [RE-wrenches] Trackers

2018-09-06 Thread Ray
I agree with Bill & Allan on this,  I worked on my first Zomeworks tracker in '89. Trackers add quite a bit of cost and complication, and if they have a failure, they can actually be worse than a fixed array.  The Array Tech trackers would table top in failure mode, which is not good in the win

Re: [RE-wrenches] Trackers

2018-09-06 Thread Jerry Shafer
Bill, Wrenches In most cases space is always an issue, sure modules prices have dropped but top of pole trackers have a place along with large ground mount tracking systems. It will come down to economics of the ROI, 20 to 35% more output for 10% more cost, yes yhere is an increased in maintaince c

Re: [RE-wrenches] Trackers

2018-09-06 Thread Chris Schaefer
To All, Seen it first hand with existing Northeast offgrid clients that had old pole mounts with lots of generator usage during the winter months. Added a single 12 module DAT and generator usage was down to as little as twice in the entire winter. Others usage was down to just a handful of times

Re: [RE-wrenches] Trackers

2018-09-05 Thread Andrew Truitt
These guys are new but I've heard good things: http://www.sulasindustries.com/ *Regards, * *Andrew Truitt | DRV * www.dr.ventures d: 202.486.7507 NABCEP Certified PV Installation Professional ID: 032407-66 Colorado Journeyman Electrician License No.: 600132 "Don't get me

Re: [RE-wrenches] Trackers

2018-09-05 Thread Sindelar Solar
Bill, No, I'm with you on this.Given the the greatest boost (~+/- 30%) of daily tracking is during the summer and most stand-alone applications are winter-peak (where tracking adds at best 10-15%), seasonal water pumping is about the only time when small-scale tracking is justified over simpl

Re: [RE-wrenches] Trackers

2018-09-05 Thread Glenn Burt
There are a lot of All Earth trackers going up in these parts. Of course they are made just North of here, so that may be part of it. Dual axis active tracker – seem to be well made and pretty reliable. https://www.allearthrenewables.com/ -Glenn From: RE-wrenches On Behalf Of ch...@oas

Re: [RE-wrenches] Trackers

2018-09-05 Thread Dave Angelini Offgrid Solar
Bill, If you lived offgrid and had to run a heatpump for cooling in the desert, you would see that either virtual tracking ar a tracker would give you the long hours of solar power to minimize battery use. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgri

Re: [RE-wrenches] Trackers

2018-09-05 Thread Howard Arey
. Howard “Scot” Arey 254-300-1228 <mailto:scot.a...@solarcentex.com> scot.a...@solarcentex.com From: RE-wrenches On Behalf Of solar1onl...@charter.net Sent: Wednesday, September 5, 2018 6:54 PM To: 'RE-wrenches' Subject: Re: [RE-wrenches] Trackers Chris, I tho

Re: [RE-wrenches] Trackers

2018-09-05 Thread solar1online
Chris,I thought since solar PV prices have come down (understatement), is it not more cost effective to buy more modules than a tracker? Are there scenarios that the above would not ring true? (As I remember, off grid water pumping for livestock ponds may still be an exception as also, limited spac

Re: [RE-wrenches] Trackers

2018-09-05 Thread Dave Angelini Offgrid Solar
I have been waiting for a small 6" pole tracker like the AZ125 that array tek made. I could get 2KW on it. They only make the 8" (too much work) and HZLA that I use quite a bit. --Dave On Wed, 5 Sep 2018 14:41:19 -0600, wrote: Dear people: What trackers are y'all using nowadays? I have

Re: [RE-wrenches] Trackers

2018-09-05 Thread Jerry Shafer
Chris/Wrenches Been happy with Zoomworks, array tech has been an issues with replacement parts Jerry On Wed, Sep 5, 2018, 1:45 PM wrote: > Dear people: > > > > What trackers are y’all using nowadays? I have a customer (with a great > site) who’s insisting on a pair. We’ve sold Zomeworks and Ar