Here's a product that I just learned about. The roofers we work with love
these. I haven't bought a set yet but it's on the list...
http://www.metalplusllc.com/
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
O
<http://www.berkeleysolar.com/>
>>
>>
>> *From:* re-wrenches-boun...@lists.re-wrenches.org
>> [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *bob
>> ellison
>> *
*From:*Jesse Dahl
*To:* "RE-wrenches@lists.re-wrenches.org"
*Sent:* Sat, May 7, 2011 7:21:43 PM
*Subject:* [RE-wrenches] Working on metal roofs.
Wrenches,
I will be installing multiple arrays on metal roofs at a local
community college and am wondering ab
ar.com
_
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of bob ellison
Sent: Sunday, May 08, 2011 5:22 AM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Working on metal roofs.
Look into a set of the roofer&
you on the roof and alive
long enough to finish the job.
Bob Ellison
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Darryl
Thayer
Sent: Sunday, May 08, 2011 1:42 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Working on m
ot;
Do not ever believe anything, but seriously trust through
action.
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Kirpal Khalsa
Sent: Sunday, May 08, 2011 11:12 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Working on metal roofs.
ported by
> the perlongs
>
> DT
>
>
>
>
>
> From: Jesse Dahl
> To: RE-wrenches
> Sent: Mon, May 9, 2011 1:21:12 AM
> Subject: Re: [RE-wrenches] Working on metal roofs.
>
>
> Thanks DT!
>
>
>
> I'm thinki
stand without
buckeling the roof. (some comerical or barn type roofs are mearly supported by
the perlongs
DT
From: Jesse Dahl
To: RE-wrenches
Sent: Mon, May 9, 2011 1:21:12 AM
Subject: Re: [RE-wrenches] Working on metal roofs.
Thanks DT!
I&#
Jesse:
I have welded up custom ridge brackets. To these I attach a welded ring
for tying off and bolt 2X6 to screw in plank jacks
(http://millersolar.com/Portfolio/Inverters/battery_iinverters/JB_XW/jb_xw.html).
On steep roofs, I have run 2X6 and/or ladders down to the ground. I clip
or sc
hl
> To: RE-wrenches
> Sent: Mon, May 9, 2011 1:21:12 AM
> Subject: Re: [RE-wrenches] Working on metal roofs.
>
> Thanks DT!
>
>
> I'm thinking chicken ladder for that upper roof work. Have you used ladder
> hooks?
>
>
> Jesse
> Sent from
ladder were working
above a work platforrm (scaffold)
From: Jesse Dahl
To: RE-wrenches
Sent: Mon, May 9, 2011 1:21:12 AM
Subject: Re: [RE-wrenches] Working on metal roofs.
Thanks DT!
I'm thinking chicken ladder for that upper roof work. Have you
adder is not to be streched at 45 degrees. ground to roof. When tie off
> is used for fall protection remember swing fall and rescure plan.
>
> Darryl
>
> From: Jesse Dahl
> To: "RE-wrenches@lists.re-wrenches.org"
> Sent: Sat, May 7, 2011 7:21:43 PM
>
: Sat, May 7, 2011 7:21:43 PM
Subject: [RE-wrenches] Working on metal roofs.
Wrenches,
I will be installing multiple arrays on metal roofs at a local community
college
and am wondering about tying off. Most of the work will be done off of
scaffold
and JLGs, but there will be times I will have
Wrenches,
I will be installing multiple arrays on metal roofs at a local community
college and am wondering about tying off. Most of the work will be done off of
scaffold and JLGs, but there will be times I will have to access upper portions
of the roof. I am looking at two arrays that will b
14 matches
Mail list logo
