If you are using EnnexOS you can clear remotely. Select the device with
the issue, then config, then parameter. Filter by 'AFCI'. Turn off.
Wait a few minutes, turn back on. I wouldn't recommend doing this
unless you're certain its a false arc-fault.
Matt
On 2019-09-15 20:54, Jeff Clearwa
I am fairly certain you cannot reset through the portal, unfortunately. I
have done the "rapid whack method" many times. Feels kind of strange, but
works well. The message must be displayed for that to work though. So if
you already reset the inverter, you have to wait for the error to show up
agai
I did finally get it to clear using taps but it was a lot of tapping. 3
taps after the second restart with blue light blinking did it - or maybe
that was a coincidence - and it just decided to clear then.
Bill - I did try clearing it through the Data Manager M (EnnexOS) but
there didn't appear
I've only had the "tapping" method work on SB-22 inverters, not on -40
inverters. You gotta log on to the machine which I think you can only
do onsite. Has anyone ever done a reset of the 8206 from the portal?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsvill
be affected by radio waves and by
other factors that create a disturbance that can trigger the AFCI.The TL
40 was supposed to overcome this problem.
- Original Message -
From:
"RE-wrenches"
To:
"RE-wrenches"
Cc:
Sent:
Sun, 1 Sep 2019 07:42:14 -1000
Subject:
[
e" a -40 with my laptop, I'm
>>>>> pretty sure I've seen where you can disable it?
>>>>>
>>>>> Bill
>>>>> On 9/2/2019 7:12 AM, drake.chamber...@redwoodalliance.org wrote:
>>>>>
>>>>> At least with the
lt;mailto:re-wrenches@lists.re-wrenches.org>
Cc:
Sent:
Sun, 1 Sep 2019 07:42:14 -1000
Subject:
[RE-wrenches] SMA phantom arc faults
Aloha all,
e.chamber...@redwoodalliance.org wrote:
>>>>
>>>> At least with the TL-22s, the AFCI function can be turned off. You need
>>>> a* Web connect speed wire module*. .I don't know if this same protocol
>>>> will work for the TL 40s or not.
>>
s or
not.Metal roofing can apparently be affected by radio waves and by
other factors that create a disturbance that can trigger the AFCI.The TL 40
was supposed to overcome this problem.
- Original Message -
From: "RE-wrenches" [9]
To: "RE-wrenches" [10]
Cc
peed wire module*. .I don't know if this same protocol
>>> will work for the TL 40s or not.
>>>
>>> Metal roofing can apparently be affected by radio waves and by other
>>> factors that create a disturbance that can trigger the AFCI.The TL 40 was
>>> supposed to overcom
for the TL 40s or not.
>>
>> Metal roofing can apparently be affected by radio waves and by other
>> factors that create a disturbance that can trigger the AFCI.The TL 40 was
>> supposed to overcome this problem.
>>
>>
>>
>> - Original Message -
>
>>
>> Metal roofing can apparently be affected by radio waves and by other
>> factors that create a disturbance that can trigger the AFCI.The TL 40 was
>> supposed to overcome this problem.
>>
>>
>>
>> - Original Message -
>> From:
>
at create a disturbance that can trigger the AFCI.The TL 40 was
> supposed to overcome this problem.
>
>
>
> - Original Message -
> From:
> "RE-wrenches"
>
>
> To:
> "RE-wrenches"
>
> Cc:
>
> Sent:
> Sun, 1 Sep 2019 07:42
er the AFCI.The TL 40
was supposed to overcome this problem.
- Original Message -
From:
"RE-wrenches"
To:
"RE-wrenches"
Cc:
Sent:
Sun, 1 Sep 2019 07:42:14 -1000
Subject:
[RE-wrenches] SMA phantom arc faults
Aloha all,
t can trigger the AFCI.The TL 40
was supposed to overcome this problem.
- Original Message -
From: "RE-wrenches"
To:"RE-wrenches"
Cc:
Sent:Sun, 1 Sep 2019 07:42:14 -1000
Subject:[RE-wrenches] SMA phantom arc faults
Aloha all,
My company has really been struggling w
Hey Marco,
I hear you, we have installed many SMA-40's and we're not
at the same point as you may be but we've definitely had a fair number
of arc fault shut-downs which take a site visit to rectify. One
location had been experiencing lightening over a year and a half which
seeme
Aloha all,
My company has really been struggling with the SMA US-40 line of inverters
and incredibly disruptive to positive customer experiences bogus arc
faults.
We were told by our SMA friends that a firmware update/fix was forthcoming
in mid-August and we’ve heard nor received nothing last mon
17 matches
Mail list logo
