Re: [RE-wrenches] XW Pro multi-inverter

2021-02-10 Thread Dave Angelini Offgrid Solar
Hi Kent, I appreciate the sound tip on the water fill jug! OK, there is an issue here and I did a temporary fix. There is 1.10 firmware that was supposed to be out at xmas. It is coming and they know about this. I assume you have other devices? Mppts, Bat mon, or SCP. and the Gateway! Let me

[RE-wrenches] XW Pro multi-inverter

2021-02-10 Thread Kent Osterberg
Have any wrenches out there installed a Schneider XW Pro multi-inverter setup with three inverters per the multi-inverter design guide

Re: [RE-wrenches] MLSD module level shutdown

2021-02-10 Thread Dave Angelini Offgrid Solar
Thanks Sky! I can think of a few other uses in a fire if I needed something less destructive than a common fire extinguisher. Please let us know if you hear more and costing info. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail offgr

Re: [RE-wrenches] MLSD module level shutdown

2021-02-10 Thread Sky Sims
I don't see any indications that MLSD is making solar safer. It's increasing system cost and maintenance expense but the safety benefits haven't revealed themselves to me yet. Adding all the extra components increases the risk of failure in the system and increases the time our technicians have to

Re: [RE-wrenches] Battery Specific Gravity versus Electrolyte Level

2021-02-10 Thread Kent Osterberg
I have also found that the Plews battery filler works well for most L16 batteries. One does need to be careful in recommending it because there are some batteries that it fills higher than the recommended amount. Also, be aware that this type of filler will continue to fill a bit after the elec

Re: [RE-wrenches] Battery Specific Gravity versus Electrolyte Level

2021-02-10 Thread Dave Angelini Offgrid Solar
The Plews Lubrimatic water fill jug (not a blue one) is a fine tool for watering L16's. It is very accurate and the valve can be cleaned, I have used them on hundreds off offgrid battery systems from Surrette, US battery, Trojan, and Crown. I am mostly using US battery because they get my clien

Re: [RE-wrenches] Sol ark 120v issues

2021-02-10 Thread Nick A Lucchese
I agree with many of you on waiting awhile longer until these issues are sorted out. While I definitely think there is plenty of room beyond our usual favorites for another robust battery based inverter to offer I don’t intend to embark on another frustrating adventure at mostly my expense. At t