Hi Kent,
I appreciate the sound tip on the water fill jug! OK, there is an issue here and I did a temporary fix. There is 1.10 firmware that was supposed to be out at xmas. It is coming and they know about this. I assume you have other devices? Mppts, Bat mon, or SCP. and the Gateway! Let me know. I used all of the XW's on one xanbus and the rest of the devices on the other xanbus. This was approved by Schneider. They are trying to get the XWP to run 3 phase ASAP and I assume that this has gone to the side burner. What firmware and is this grid or offgrid? Have you escalated this to Schneider? They need to hear from you! Back in the AM, going to the big city of Mariposa.... Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail offgridso...@sti.net [2] text 209 813 0060 On Wed, 10 Feb 2021 15:08:58 -0800, Kent Osterberg wrote: Have any wrenches out there installed a Schneider XW Pro multi-inverter setup with three inverters per the multi-inverter design guide [3]? I've got one installed per the manual and am having a devil of a time getting it to stay latched onto the generator with the external contactor. Can't even get it to stay latched on with no load. All advise on getting this to work is appreciated. Kent Osterberg Blue Mountain Solar Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:offgridso...@sti.net [3] https://solar.schneider-electric.com/download/xw-pro-iec-technical-publications/?ind=13539&filename=XW-Pro-Multi-unit-Design-Guide-990-91373.pdf&wpdmdl=10327&refresh=6024628387f561612997251
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
