Re: [RE-wrenches] PV powered music festival

2011-04-28 Thread Exeltech
Class 'A' amplifier power output stages idle at 50% of their rated maximum output power.  Add the power consumed by other aspects of the amplifier's electronics and the total idle wattage could easily run 60% or more of the maximum output wattage rating for the entire amplifier -- and as William

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread Starlight Solar, Larry Crutcher
Yes Larry, a starting battery. I'm feel quite sure it is designed for constant voltage. We were discussing the deep cycle AGM battery. I have seen batteries charged incorrectly and survive. But why take the chance having a meltdown or worse? Perhaps this will help some understand the importanc

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread wirewiz
I have been prolonging the temp comp. absorption voltage (no current) on start batteries in boats for many years without any problems. Larry Liesner Wirewiz 31 Lincoln St Westport, CT 06880 Phone: 203-644-2404 wire...@gmail.com www.wire-wiz.com On Apr 28, 2011, at 5:52 PM, Starlight Solar, La

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread Starlight Solar, Larry Crutcher
Re: [RE-wrenches] AGM battery charging, more details"Until now"?. For proper VRLA battery charging, once it is full, you MUST reduce the voltage. It does not matter that you are opportunity charging. What if your turbine is making power 24/7? The voltage will still need to be reduced afte

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread Hugh
At 13:10 -0700 28/4/11, Starlight Solar, Larry Crutcher wrote: Hugh, One last point about the Solar Boost IPN product: Once you have programmed the 2512iX charge controller from the IPN Pro, the controller retains the information and can be installed as a stand-alone unit. That means you can

Re: [RE-wrenches] Oatey and Standoff vs QuickmountPV Labor

2011-04-28 Thread James Rudolph
Jamie, My crew and I have installed the quickmounts almost twice as fast as the Oateys consistently for a good year or two. My main concern with Oateys is that rubber boot, it seems to be the Achille's heel of the whole system. How long does it take before that gasket is shot? This has been the

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread Starlight Solar, Larry Crutcher
Re: [RE-wrenches] AGM battery charging, more detailsHugh, One last point about the Solar Boost IPN product: Once you have programmed the 2512iX charge controller from the IPN Pro, the controller retains the information and can be installed as a stand-alone unit. That means you can have a custom

Re: [RE-wrenches] PV powered music festival

2011-04-28 Thread Starlight Solar, Larry Crutcher
The length of the festival will play a major role in how much PV power you need. If it is only a couple days, you could start with a large, fully charged battery bank for day (night) 1 and then just bulk them up for the second day. If there is a resting period between events, the PV's will have

Re: [RE-wrenches] PV powered music festival

2011-04-28 Thread William Miller
Friends: I can not speak to the subject of tube amplifiers specifically, but in my experience, I have found that a PA system draws almost as much idling as it does during a performance. I suggest that if you need to conserve battery power, after sound check that the amps be shut down. Sound

Re: [RE-wrenches] PV powered music festival

2011-04-28 Thread Jason Szumlanski
We JUST had a request come in for powering an American Cancer Society daytime event. They said the band requires a 75kW generator. Hogwash... just another example of how most stage and band people have no clue what their power/energy consumption is. I bet the entire stage will be plugged into o

Re: [RE-wrenches] PV powered music festival

2011-04-28 Thread Jason Szumlanski
Dan, Nice trailer. We take a bit of a different approach. 40kWh (20hr rate) of Rolls Batteries is our standard. It requires a custom trailer with heavy duty axles and a pretty good vehicle to tow it. So many events require power to be on-site for setup early in the morning or require power a

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread Hugh
Hi Bill, Hugh, .25 x C20 would be a C80 rate Sorry I did not mean that, and I do not think that is what the manufacturers instructions mean either. They mean 0.25 times the C20 capacity. That is closer to the C4 rate! (And they say 'up to 0.35 x capacity' ). All controllers that I've

Re: [RE-wrenches] AGM battery charging, more details

2011-04-28 Thread William Dorsett
Hugh, .25 x C20 would be a C80 rate, and with flooded batteries, C100 was the cutoff point at which you could do without a controller. All controllers that I've ever worked with make adjustments in current to meet the transitions between bulk-absorption-float. PWM controllers do it by adjusting the

Re: [RE-wrenches] PV powered music festival

2011-04-28 Thread Exeltech
Hi Ray, Problems?  Nope.  Never. My "no tube amps" comment is a power consumption issue as you surmised.  Nothing more.  Fact is, if I had unlimited battery reserve, I'd prefer tube amplifiers over solid state, but that's another topic. I powered Earth Day in Dallas in 2002 with a much smaller