Some of the small Solectrias are made in Taiwan.
Matt T
Michael Kelly wrote:
Mike,
Solectria grid-tie inverters are made in the USA. They have
three-phase 13kW and 15kW units. Web site: www.solren.com.
- Mike
--
Michael Kelly
Project Manager / Project Engineer
NABCEP Certified Solar PV Ins
We refuse to do or even quote for any of those, so can't help you much.
..
Northern Arizona Wind & Sun - Electricity From The Sun Since 1979
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
...
Hello wrenches -
I'm consulting for a local wrench here in Colorado.
Does anyone here have experience with ET Solar modules?
They appear to be from a large company in China, and my client's
customer found a great package deal on 3.2kw of modules at $2.84 a watt,
bundled with an SMA SB4000.
The
PV powered is USA, lots of sizes.
jay
peltzpower
On Sep 2, 2009, at 2:53 PM, Michael Kelly wrote:
Mike,
Solectria grid-tie inverters are made in the USA. They have
three-phase 13kW and 15kW units. Web site: www.solren.com.
- Mike
--
Michael Kelly
Project Manager / Project Engineer
NABCEP C
We are nearing completion of our own home NW of Fort Worth. We were able to
roll the cost of the 2-1350W Wattsun trackers into the mortgage payment. Though
we were not able to qualify for anything more than the 30% tax credit, the
amoratized cost will more than offset the non-rebate available j
Friends:
Better advice: If you can down size a breaker in the main panel feeding
the garage sub-panel to about 70 amps, you gain 30 amps of back feed
capability. Far easier and cheaper.
William
At 01:04 PM 9/2/2009, you wrote:
Carl:
To analyze these scenarios, you need to know the Max
Mike,
Solectria grid-tie inverters are made in the USA. They have
three-phase 13kW and 15kW units. Web site: www.solren.com.
- Mike
--
Michael Kelly
Project Manager / Project Engineer
NABCEP Certified Solar PV Installer ™
SolarFlair Energy, Inc.
11 Mayhew Street
Framingham, MA 01702
Direct Mob
We have obtained a letter from SMA stating that their inverters qualify for
the "Buy American Provisions of the ARRA" under the World Trade Organization
Government Procurement Agreement. They say this position is based on the
advice of "outside counsel" but give the disclaimer that "you are encour
We are running into applications that need American made products for
stimulus monies. Modules are easy inverters are the difficult thing. Has
anyone gotten any of the big name inverters approved? Looking for 10KW 3
phase. 3 - 3KW units would be fine, or a single 10KW as well.
Mike Cook
m...@
Carl:
To analyze these scenarios, you need to know the Maximum AC Output Current
possible with a given inverter. I do not have the time to look these up, I
leave that to you.
Assuming the breaker sizes are close to the maximum AC output amps, you are
above the capabilities for load side con
Carl, it looks like you're already Code-noncompliant thanks to the 100A
garage panel having 100A utility, 20A PV, and 20A wind breakers
supplying it. Adding an additional 20A of PV of course doesn't help
things. I'd replace the 100A panel with a 150A+ (so probably a 200A),
keeping the 100A main
Hello Wrenches,
I have a prospect who has an existing PV system and a small wind
turbine already in place. He is interested in adding additional
capacity via another small grid tie system. The attached drawing
outlines the existing and proposed installation. My question has to
do with the grid
12 matches
Mail list logo
