Re: [RE-wrenches] Magnum AGS with Kohler RES 8.5

Mario, what you are looking in any gen set application is the fuel solenoid valve. On the KOHLER 8/12 RES units, if you are facing the open door/run/auto switch,the right side of the enclosure is removed.END of the unit. Inside this space top left corner is our propane inlet. you will see, depend

Re: [RE-wrenches] Magnum AGS with Kohler RES 8.5

MessageTump, Dave, This is very timely info for us. Could you pass the diagrams along? Thanks, Mario [EMAIL PROTECTED] - Original Message - From: Tump To: 'RE-wrenches' Sent: Monday, November 03, 2008 10:51 AM Subject: Re: [RE-wrenches] Magnum AGS with Kohler RES 8.5 DAV

Re: [RE-wrenches] crystalline VS uni-solar and beyond

Properly made Unisolar amorphous silicon solar modules power output should be good for the 20-year warranty period. NREL tests on the Unisolar 3-junction modules started 1997 and measure less than 1%/year degradation and holding steady at the same rate as properly made crystalline silicon solar

Re: [RE-wrenches] Magnum AGS with Kohler RES 8.5

DAVE did you get this information on Friday? let me know if you need additional info, as I do have wire diagrams for Kohler gen sets. TUMP -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of robert ellison Sent: Monday, November 03, 2008 10:37 AM To: RE-wrench

Re: [RE-wrenches] Magnum AGS with Kohler RES 8.5

Hi Dave, Try the oil pressure wire, it probably is live when running but I have seen some shut down systems that go to ground to stop, might not work there. Don't give up on them yet, I expect that I know who that was at tech and he still has some learning to do. He once told me that he would not

[RE-wrenches] Solar PV glazing?

Another question for the group: What products are commercially available now for BIPV embedded in glazing? Thanks in advance. -Nik ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lis

Re: [RE-wrenches] crystalline VS uni-solar and beyond

Yes Doug... I am waiting for some more in-field time for the enphase, and am trying to pencil out install labor differences of micro VS central... something we are all curious about. In this application however, the crstaline alternative would allow me to only locate modules in non-shaded roof

[RE-wrenches] Ballast Racks with Thermal Collectors

Wrenches, Has anyone used a ballasted roof rack system for mounting flat-plate solar thermal collectors on a flat roof? What are the issues involved? Thanks, -Nik ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.or

[RE-wrenches] crystalline VS uni-solar and beyond

How about the longevity? This is the one area that has not been tested. Crystalline cells have proven their longevity for the most part. Their weakness seems to be sealants and gaskets more than cell longevity. How will the amorphous panels be producing in 20 years? Is this why Sanyo has kep

Re: [RE-wrenches] Magnum AGS with Kohler RES 8.5

Thank you Daryl, Tump and Ryan for your responses. Good solutions for our problem. - Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Friday, October 31, 2008 6:10 PM To: RE-wrenches Subject: Re: [RE-wrenches] Magnum AGS with Kohle