Re: [RBW] Re: Best spray lube for pivots, pulleys

a under a different name. Read the news letter for more info. Matt On Wednesday, May 28, 2014 2:10:39 PM UTC-7, Jim Bronson wrote: > > Teflon is a solid. It does not belong on moving parts. > > > On Wed, May 28, 2014 at 3:39 PM, 'hangtownmatt' via RBW Owners B

Re: [RBW] Re: Best spray lube for pivots, pulleys

? That is to say, will > it leave a sufficient film for lubrication? > > > On Wed, May 28, 2014 at 2:39 PM, 'hangtownmatt' via RBW Owners Bunch < > rbw-owne...@googlegroups.com > wrote: > >> Here's what I use for e

[RBW] Re: The Angel of breaking, not braking

Michael, I thought you were going to take this a whole different direction. For example, when you compare the low cost and easy replacement of a square taper crank arm to auto brake pads, rotors, wheel bearings, and circuit boards on electrical appliances things begin to look optimistically fa

[RBW] Re: Sign I need 1/8 Chain vs. 8-speed?

Hey guys - Chains don't stretch. They wear. Matt -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to

[RBW] Re: New bike day n+0 for now

On Thursday, July 24, 2014 10:19:34 AM UTC-7, hsmitham wrote: > > I'm covered on the bike front and oh so wish I could realistically bike > commute but 40 miles RT is just too much. >> >> >> Hugh, I'm 58 years old and RT commute 35 miles a day, 5 days a week, on my Sam Hillborne; year round. S

[RBW] Re: Paul Thumbies or IRD stem mounted shifters?

I love bar end shifters, but when I switched from the Noodles to the Surly Open Bar the bar ends were out of the question. They would have simply stuck out too far; too wide if you get my drift. So I went with the stem shifters. The advantages of stem shifters are (1) they make switching ha

Re: [RBW] Re: Winter means looking for problems that might not exist and solving them. Hence, Stem Shifters!

I currently ride a Sam with stem shifters. My motivation to switch from bar end shifters to stem shifters had more to do with handlebar experimentation than anything else. I originally set up my Sam with Noodles. After a couple years I wanted to try something more upright. The upright bars

[RBW] Re: Speed Wobble on Big Rivs?

Prompted by this thread, I put my 60 cm double top tube'd Sam Hillborne to the test on my evening commute. One rear pannier stuffed with clothes and a trunk pack packed with some goods, but nothing too heavy. All in all I'd say a max of 10 lbs. I -- You received this message because you

[RBW] Re: Speed Wobble on Big Rivs?

r easily. Matt On Tuesday, November 25, 2014 9:03:16 PM UTC-8, hangtownmatt wrote: > > Prompted by this thread, I put my 60 cm double top tube'd Sam Hillborne > to the test on my evening commute. One rear pannier stuffed with clothes > and a trunk pack packed with some goods

[RBW] Re: ISO used, wind-blocking, UV blocking, decent quality cycling shades

Jim, I couldn't agree more. It is your EYES! Patrick, you already had cataract surgery so you know your eyes are vulnerable. Protect them! By-the-way, your replacement lens implants have UV protection built in. Your primary focus now should be wind, dust and general debris protection. But

[RBW] Nitto Struts

Are they hollow? In other words, if I cut one down to size for a Mark's Rack will I end up with an open ended tube? Matt -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, sen

[RBW] Re: Nitto Struts

Thank You !!! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners

[RBW] Re: Dumber than my derailer!

Relax. If it shifts and the chain doesn't rub ... Just Ride! Matt On Wednesday, January 21, 2015 at 6:10:30 PM UTC-8, Deacon Patrick wrote: > > Ha! No worries about my self worth, Michael, though I appreciate your > ministerial wisdom! My self worth comes from God, I know it's there, and > the

[RBW] Gooney Bird

I'm reading the biography of Louis Zamperini, "Devil at My Heels", and came across an interesting (Riv content) factoid I thought I'd share with the group. Kind of funny too! They had just landed their B-24 Bomber on Midway Island, 1,300 miles northwest of Honolulu. Zamperini finally got a s

[RBW] Re: How have your Rivendells held up on salty winter roads?

Anton, I believe the problem with bringing the bike indoors versus keeping in a garage or other non-insulated structure is that transitioning between warm and cold environments promotes condensation inside the frame. Matt On Friday, January 30, 2015 at 7:31:10 AM UTC-8, Anton Tutter wrote: > >

Re: [RBW] Re: Grant sets them straight with letter to editor

"When your bike weighs 90 pounds, a 2nd top tube may actually be doing you some good!" I cannot agree and feel compelled to reply because I think others could be misled. I'm no heavyweight (170 lbs.) and commute on a 2-TT 60cm Hillborne. Granted I carry a commuters load in the rear but nothin

Re: [RBW] Re: Grant sets them straight with letter to editor

If it isn't the frame than I suppose it must be the Sugino crank. Something's flexing. Matt On Friday, February 27, 2015 at 4:46:38 AM UTC-8, Steve Palincsar wrote: > > On 02/27/2015 01:14 AM, 'hangtownmatt' via RBW Owners Bunch wrote: > > "When your bike

Re: [RBW] Re: Grant sets them straight with letter to editor

It's the standard Sugino XD 600. On Friday, February 27, 2015 at 9:59:33 AM UTC-8, Mark Reimer wrote: > > What kind of crank is it? Some cranks with small BCD and large, stamped > rings can flex a lot. > > On Fri, Feb 27, 2015 at 11:58 AM, 'hangtownmatt' via

[RBW] Re: Albastashes on a Cheviot; advice sought!

Lies, Have either of you considered simply replacing the seat? Most LBS's will work with you and let you try before you buy. This would be easier and less costly than replacing the whole cockpit. Matt -- You received this message because you are subscribed to the Google Groups "RBW Owners

[RBW] Re: Albastashes on a Cheviot; advice sought!

I completely missed that. Matt On Tuesday, September 29, 2015 at 10:37:40 AM UTC-7, Will wrote: > > I get that you've investigated saddles. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receivi

[RBW] Re: Double leg Kickstands... lets talk

It looks like the double legger is no longer available through Riv's web site. Not out of stock but non-existent. Did I miss something? On Thursday, August 20, 2015 at 6:51:02 PM UTC-7, Will @ Riv wrote: > > Basically it's this, and I'm sorry we've been unclear about it: We have > two kickstan

[RBW] Re: All arounder Handlebar recommendations GO!

Drew, Take a look at the Surly Open Bar: http://surlybikes.com/parts/handlebars/open_bar I choose the "zero rise" version for my Sam. It has three solid hand positions which allow me to ride both upright and stretched out. I installed this bar as a temporary solution and haven't looked back.

[RBW] Re: Atlantis commute... first time in about two years!

Rene, Although it is important to find a comfortable position on the bike it is equally important off the bike, And it sounds like you may be spending more time lately in the office and/or on a computer than on a bike. So if that is the case, you may want to try moving your computer mouse to

[RBW] Re: What do Rivendell Riders use for head coverings for riding in the sun?

Here's what I use: http://www.treadley.com.au/ This little cottage industry was developed by a concerned mother in Australia. They can look a bit goofy but work fantastic. If I remember correctly she had a big sale right around Easter last year. Matt -- You received this message because y

Re: [RBW] The aftermath of my recent car vs. bike hit and run.

David, I notice you did not list any head injuries. Were you wearing a helmet?Any advice in that department you would be willing to share? Your injuries sound serious. I wish you the best and pray you heal quickly. I'm glad to hear you have lots of support. Sincerely, Matt On Thursda

[RBW] Re: Bike shop mechanics answer this:

Prior to purchasing my Sam Hillborne I was interested in the Trek 520. The problem was I couldn't get the handlebars high enough. I wanted them at least seat height. I emailed Trek to see if a dealer could order one for me with the steering tube uncut. Here is their reply: "No, unfortunatel

[RBW] Re: Go fast-ish tires on the Hillborne

Supple tires make a difference, but I'm primarily a commuter averaging 100 to 150 miles a week and am skeptical they would be a good choice for my application. I HATE fixing flats on cold dark mornings at 5 AM and really appreciated getting just a hair under 10,000 miles out of my Marathon Sup

Re: [RBW] Re: What do Rivendell Riders use for head coverings for riding in the sun?

1:22:53 AM UTC-7, Anne Paulson wrote: > > Are Treadley helmet hats available in the US, or do I have to send to > Australia? > > On Sat, Mar 21, 2015 at 8:24 AM, 'hangtownmatt' via RBW Owners Bunch > > wrote: > > Here's what I use: > > > > htt

Re: [RBW] Re: What do Rivendell Riders use for head coverings for riding in the sun?

Personally, I do not see how anyone can disagree with Steve. Maybe his delivery is harsh but the message true. Bangs on the head are cumulative and the long term results have been proven. If I had a bludgeoned brain I would be taking measures to protect it. I'm not saying helmets are perfe

Re: [RBW] Re: What do Rivendell Riders use for head coverings for riding in the sun?

Where can I buy a pair of these rose colored lenses that will allow me to interpret everything written by Deacon to be sensitive enlightened wisdom? Because the lenses I'm looking through aren't working. Here's what I see in his response: - "Tell me this is an elaborately planned, well ram

Re: [RBW] Re: Beausage Reminder

David, Help me to understand. The rated capacity of a Nitto 32F front rack is 4.4 lbs. I have no idea what the weight capacity of a stock Wald basket is. Are you saying roughly 5 lbs will crumple the Wald basket stays? Matt On Friday, April 3, 2015 at 10:25:15 AM UTC-7, cyclot...@gmail.com

Re: [RBW] Re: Beausage Reminder

I hit a bump, > had to push the rest of the way home. > The 32F hasn't let me down yet! > > On Fri, Apr 3, 2015 at 7:33 PM, 'hangtownmatt' via RBW Owners Bunch < > rbw-owne...@googlegroups.com > wrote: > >> David, >> >> Help me to understand. Th

Re: [RBW] Re: Beausage Reminder

d, > but nothing is limitless. > > -Jim > > Sent from my iPhone > > On Apr 4, 2015, at 5:28 AM, "'hangtownmatt' via RBW Owners Bunch" < > rbw-owne...@googlegroups.com > wrote: > > Wow! I wonder why Nitto chooses to be so ultra conservative?

[RBW] Re: Putting a rack on a Dave Scott

Mike, Your biggest challenge will be finding a rack that will be level once connected. This will not be easy since the compact rear triangle geometry of the DS was never intended to have a rack. I suggest you go to some local bike shops and put the burden on them to something that will work.

[RBW] Re: Hunq's Slipping Seatpost

For as long as I can remember, grease has been applied to seat posts to prevent corrosion that WILL fuse the seat post to the seat tube. Am I the only one who thinks it is a mistake to eliminate grease from this contact point? Matt On Monday, April 27, 2015 at 7:17:04 AM UTC-7, Kevin Lindsey

[RBW] Re: Anyone in Folsom free Sunday?

Manny, Below are a few links. Assuming you'll be with your fiance I'll recommend the ride around Lake Natoma instead of Folsom Lake. Very romantic. This is probably what you have been hearing about anyway. Lake Natoma is below Folsom Lake Dam and should make for a perfect paved ride, Very s

[RBW] Re: Help Riv: Let people ride your bike

Great idea, and I do let everyone interested ride my Sam Hillborne, but most people just don't understand. They think they can turn a Surly (just an example) into a Rivendell. There are exceptions but even they don't seem to bite. And for me, I'd love a SaddleSack, but it doesn't fit my life

[RBW] Single Speed Conversion Help

My son ( a 2nd year college student) just informed me, on his actual return trip today to the University, that he "may" need a bike to get to his summer job. (Those of you with teenagers, or have who have raised teenagers, can probably sympathize with me). Huh? And why didn't you tell me this

[RBW] Re: Help Riv: Let people ride your bike

Drew, But what about the valuable inside? On Saturday, May 23, 2015 at 9:34:45 PM UTC-7, drew wrote: > > My solution has been to buy a used bag, thread a cable thru one of the > leather lashes/rack/saddle/seat stay, but small lock and attach. Someone > may cut the cable, but likely they won't g

[RBW] Re: Single Speed Conversion Help

Thank You everyone for you quick responses. I'm not sure which direction I'll go just yet. Hopefully I'll get a chance to start on this later this afternoon and simply take it one step at a time. Matt -- You received this message because you are subscribed to the Google Groups "RBW Owners

[RBW] Re: "How old is your Hillborne?" Really

I get this a lot also. I'd say it's a 50/50 mix of people thinking it's old and people who know what it is but have never seen one in person. There's no doubt it's an attention getter, I think it's mostly due to the double top tube. On Monday, May 25, 2015 at 11:49:44 AM UTC-7, Marc Irwin

[RBW] Re: Single Speed Conversion Help

Well, I still had all the old the parts so I basically restored it back to its original SunTour_DiaComp configuration. A few things like the handlebars, double crank, pedals, and seat aren't original, but I had replacement items on hand and they were not of any great value. I used these beca

[RBW] Re: Single Speed Conversion Help

I keep referring to this Nishiki as an 1986 when it is actually a 1983. Not that it really matters to anyone but myself, but the 1986 I have is a Bianchi Squadra. Both are great bicycles but now just hang on hooks since getting the Sam Hillborne in 2012. Matt -- You received this message b

[RBW] Re: Threaded Headset Recommendation

Wow, I've ridden bicycles all my life and have never replaced a headset and rarely service them. My 2012 Hillborne has the original headset with 12,000+ miles and I haven't even checked it. I had planned on servicing it this summer though. What do you think causes the rapid failure of yours?

[RBW] Re: Curious: saddle bags versus panniers?

Ortlieb Panniers for me. Mostly due to their easy on and easy off system. I love the romance of a well used saddle bag but it doesn't fit my lifestyle at this time. However, I learned a long time ago to never say never. On Tuesday, May 26, 2015 at 6:44:50 PM UTC-7, Patrick Moore wrote: > > I

Re: [RBW] Curious: saddle bags versus panniers?

Anne, I skipped the Ortlieb inserts and went to a hardware store and bought some clear tubing of the proper diameter for my rack. This stuff is similar to surgical tubing; soft and pliable. I cut four pieces the appropriate length to fit between the cross members of the rack where the pannier

[RBW] Re: loaded handling question

Since nobody else has suggested it, I'll throw this out for consideration - How about a trailer? Here's one I'd consider and might be perfect for your adventures: http://www.extrawheel.com/en/3/bicycle_trailer/ https://www.biketrailershop.com/extrawheel-trailers-c-140.html On Thursday, May

[RBW] Re: loaded handling question

Sorry David. I just reread your post and see you only want suggestions that work with what you already have. Good luck with that. On Saturday, May 30, 2015 at 8:51:57 AM UTC-7, hangtownmatt wrote: > > Since nobody else has suggested it, I'll throw this out for consideration >

[RBW] Re: loaded handling question

Wow! I find this post disturbing. If I bought an Atlantis expecting it to carry a load and it couldn't, I'd be upset. As a side note: I participated in this years "Party at Pardee". It's a Northern California foothills annual metric century with about 4,500 feet of climbing. In a sea of c

[RBW] Re: Attn Sac area folks: Meet Your Makers ride this Saturday June 6

I might be into this. I don't like the name of the event but I've ridden my Sam to Bike Dog Brewery and enjoyed a couple pints. Very nice brewery. A place where you can bring your dog, ride your bike and park inside, or just have a brew. How does it get any better? I'll let you know w

[RBW] Re: Attn Sac area folks: Meet Your Makers ride this Saturday June 6

Neil, it looks like I can make it. I'll also be on my Sam. Are you, or anybody else, familiar with the route? There isn't much information on the website. My concern is with what they call gravel. I'm currently running 33mm tires and Longboard fenders. Do you think this will be a problem?

[RBW] Re: Attn Sac area folks: Meet Your Makers ride this Saturday June 6

And here I thought "meet your maker" had something to do with the difficulty factor. Nope. This explains it: http://meetyourmakertour.com/about/ On Sunday, May 31, 2015 at 10:04:48 PM UTC-7, hangtownmatt wrote: > > I don't like the name of the event but > -- Y

[RBW] Re: Attn Sac area folks: Meet Your Makers ride this Saturday June 6

'50 miles in the Delta' has gotta mean > 'flat'. I think 33s would be more than adequate. > > On Monday, June 1, 2015 at 6:31:26 PM UTC-7, hangtownmatt wrote: >> >> Neil, it looks like I can make it. I'll also be on my Sam. Are you, or >> any

Re: [RBW] Re: Attn Sac area folks: Meet Your Makers ride this Saturday June 6

Thank You Jeremy. I had no idea this was such a big event. On Tuesday, June 2, 2015 at 8:07:26 AM UTC-7, Jeremy Till wrote: > > All of the most recent information is on Facebook: > > https://www.facebook.com/events/925697187482553/ > > I have it from the guy organizing the event-- Robert Ives

[RBW] Re: Seeking Rack Advice

#3 is a very nice feature and can easily be overlooked. On Tuesday, June 2, 2015 at 10:56:12 AM UTC-7, Will wrote: > > I've equipped 4 of our bikes with Tubus Logo Evo's. I cannot say enough > good things about the rack. Four things worth knowing: > > 1) it is extremely well made and substantial

[RBW] Re: how do you carry your loaded bike?

Drew, This won't help you but I can't help but point out that this is where a 2TT bike shines !!! Matt On Wednesday, June 3, 2015 at 10:06:40 AM UTC-7, drew wrote: > > silly question, but every time i have to go up or over something, i seem > to try a different way of grabbing the bike and eac

Re: [RBW] Re: Elephant National Park Explorer

Speed kills!! I was in a racy mood comming home from work today and damm near rear ended a car stopped where it had no business being stopped. I like your comment "built for crusing and enjoying the sites", but you young'ins have a hard time with this and I understand. Some old guys do too. M

[RBW] Re: Meet Your Maker

I'll be there on my Hillborne. Matt On Friday, June 5, 2015 at 8:15:48 AM UTC-7, Eric Norris wrote: > > Wonder if any other Sacramento-area list members will be at tomorrow’s > “Meet Your Maker” ride. I’m 95% committed to being there, on either my Road > or Quickbeam. > > www.MeetYourMakerTour.

[RBW] Re: Is it crazy to do a century with Boscos?

Is it crazy to do a century with Boscos? No, it's crazy to smoke cigarettes On Sunday, June 7, 2015 at 5:18:03 PM UTC-7, Alan Pickett wrote: > > The Lady Who Makes Me Pedal has started a campaign to get me to limit my > cigarette smoking by imposing a Soviet-style regimen of preparatory weekend

[RBW] Re: Hub Area Rack with Swift MIni Short Stack Panniers (or other bags)?

Neil, When most people think of Ortleib panniers they picture those big glossy plastic looking things people use on round-the-world tours. You may be, as I was, more interested in Ortleib's Sport Packer and/or Sport Packer Plus lineup. I went with the a pair of the Sport Packer Plus's. The o

[RBW] Re: Hub Area Rack with Swift MIni Short Stack Panniers (or other bags)?

I apologize Neil. I got this backasswards. I have the smaller of the two which is the Packer ... not the Packer Plus. On Friday, June 12, 2015 at 9:31:59 PM UTC-7, hangtownmatt wrote: > > Neil, > > When most people think of Ortleib panniers they picture those big glossy >

[RBW] Re: Quickie Velogical Review

Matthew, Please keep us posted as you continue to use this device. It sounds like a great alternative and I'm interested in hearing more real use experiences. Matt On Monday, June 22, 2015 at 8:34:41 AM UTC-7, Matthew J wrote: > > Finally have my new commuter up and running. Took it on some

Re: [RBW] Re: Blug on long chainstays

Marc, How big of a cog do you use on your Hillborne? I have a 60cm Hillborne with the standard Suguino triple crankset and I believe a 34 or 36 largest rear cog, and I use standard length (114 links?) SRAM 8-speed chains. On Saturday, June 27, 2015 at 7:18:01 AM UTC-7, Marc Irwin wrote: > > I'

[RBW] Re: Somewhat but not entirely OT: Citronella candles/mosquitos?

Patrick, Have you considered installing an overhead ceiling fan or using a portable freestanding fan to stir up those calm conditions? Matt On Wednesday, July 1, 2015 at 8:52:31 AM UTC-7, Patrick Moore wrote: > > Are large citronella candles effective in repelling mosquitos in calm > condition

[RBW] Re: Somewhat but not entirely OT: Citronella candles/mosquitos?

ooppss, I see Eric already suggested this. Matt On Thursday, July 2, 2015 at 7:54:23 AM UTC-7, hangtownmatt wrote: > > Patrick, > > Have you considered installing an overhead ceiling fan or using a portable > freestanding fan to stir up those calm conditions? > > Matt >

[RBW] Re: Car Racks & Rivs

I suggest you take a look at these Sport Rider racks: : http://www.modernbike.com/hollywood-racks-hitch-racks On Friday, June 12, 2015 at 5:52:05 AM UTC-7, Michael Hechmer wrote: > > I have been riding bikes with fenders for about 15 years now and have only > found one downside - they often do

[RBW] Re: Headset question

Today I performed the annual service on my Sam Hillborne. This bike was purchased new in the spring of 2012 and has 13,000+ miles. For some reason I've never serviced the Tange cup/cone headset. Well today I did and was surprised how dry it was, Hardly any grease at all. What was there was

[RBW] Re: Question re Decal Removal

On one of my trips to Rivendell Grant pointed out to me the decals on his Hilsen. His were cracked as you describe but I do not remember any bubbling. Anyway, it seemed to me he liked it. I suppose it's a beausage sort of thing. I got to say that I kind of liked it too. Matt On Wednesday,

[RBW] Re: Sam on tour

This is good news because I have a Sam and have been told it's not up to the task of fully loaded touring. And it probably isn't capable of carrying 100 lbs but I wouldn't want to carry much more than 50lbs anyway. Would you mind sharing which Tubus racks you have and how they are attached be

[RBW] Re: Sam on tour

ing uphill. > > > > On Saturday, July 18, 2015, 'hangtownmatt' via RBW Owners Bunch < > rbw-owners-bunch@googlegroups.com> wrote: > >> This is good news because I have a Sam and have been told it's not up to >> the task of fully loaded touring. And it

[RBW] Re: Dirt Drop stem with Atlantis?

Pros - If you run the bars 2 or more inches above seat height, I think the Dirt Drops help disguise the extra long quill since it pivots approximately midway. Seems to break things up ... to my eye anyway. Put some stem shifters and/or a brass bell on the quill and that tall neck will virtua

[RBW] Re: Headset stiffness, only in middle

I recommend dropping the fork and taking a look. I just went through this exercise and was surprised how little lubrication was in the original bearings. It is fairly easy to clean the bearings, re-lubricate and reinstall. If you've never done this before it's better to learn on this headset

[RBW] Re: Stolen Fuji Touring bike in San Diego.

It would be my guess that bicycle touring in the good ol' US of A is where someone is most likely to get their bicycle stolen. Unfortunate but true. Manny, do you know what lock your buddy was using? Matt On Sunday, July 26, 2015 at 11:21:59 AM UTC-7, Manuel Acosta wrote: > > For those San

[RBW] Re: Need advice for avoiding embarrassing Brooks saddle stain...

Zach, have you ever wondered why most Lycra bicycle shorts are black? This is carry over from the days when most serious riders used oiled leather saddles. Today, however, black is not a requirement because most serious riders use plastic saddles. Ducking for cover :>) Matt On Sunday, July

[RBW] Re: Fenders in Summer

Doug, I commute Folsom to Rancho Cordova on my Sam Hillborne. I've been commuting on the American River Bicycle trail since the early 90's. For many of those years from the Fish Hatchery down past Cal Expo. On my current morning commute (5:00 AM) I take the shortest most direct route and that

[RBW] Re: Fenders in Summer

David, keep in mind that fenders keep more than water off your body and drive train. They also help keep dirt off your drive chain and out of your headset. The only time I really dislike my fenders is in a strong headwind. With my head down, struggling against the wind, they don't seen very

[RBW] Re: Sam owners: axle-brake nut measure, pretty please

Andy, Thank You. I do have a couple questions: 1. What's the difference between to two pictures? 2. Is this a 62cm Hillborne? On Tuesday, July 28, 2015 at 5:43:57 PM UTC-7, Andy.M wrote: > > >

[RBW] Does Science Now Support ... "Just Ride" ?

Here is an interesting article that may be worthy of your attention: http://velonews.competitor.com/cycling-extremes Enjoy, Matt -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from

[RBW] Re: Cheviot ~ Is more than 1 bottle holder available?

On Wednesday, August 5, 2015 at 1:50:02 PM UTC-7, Garth wrote: > > Plus, under the TT was always a goofy place for a pump when trying to pick > up the bike . > Not if you have a DTT -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To u

[RBW] Single Speed Sam on Blug

Can someone tell me what front rack this is? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this

Re: [RBW] Re: Double leg Kickstands... lets talk

I would think a single legger would inflict more twisting than a double legger. On Friday, August 14, 2015 at 6:30:53 PM UTC-7, Steve Palincsar wrote: > > I'll bet it has to do with twisting forces if and when the bike falls > over with a load. As Shawn said, "I sure wish they'd posted that >

[RBW] Re: Double leg Kickstands... lets talk

Last time I checked Surly's website they specifically said NOT to use kickstands on their chainstays. On Friday, August 14, 2015 at 6:35:58 PM UTC-7, WETH wrote: > > Drew, > I use one on my Surly LHT with sandwich-no kickstand plate on an LHT. It > has supported a good 50lbs of weight with no

[RBW] Re: Double leg Kickstands... lets talk

Here is Surly's position on kickstands for their most robust touring frame: http://surlybikes.com/info_hole/spew/kickstands_on_long_haul_truckers Kind of interesting, Matt -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe

[RBW] Re: Double leg Kickstands... lets talk

Here is a Surly LHT with a cracked chainstay right about where a kickstand plate on a Rivendell would be mounted. Granted this bike does have some miles and has been on the road a while, but he doesn't use a kickstand and judging from his experience I'd say your lucky if all that happens is the

[RBW] Re: Double leg Kickstands... lets talk

Here are my latest thoughts: We are looking at this wrong. Although damage could happen from overloading and/or falling over when the kickstand is deployed, I think the real issue is simply the weight of the double-legger itself. It weighs 25.6 oz, whereas, the single only 9.2 oz. The double

[RBW] Re: Double leg Kickstands... lets talk

Upon visual inspection of my 2012 Sam Hillborne and my wife's 2012 Betty Foy, both Taiwanese built, both appear to have the "unstout" plate. Not a term I ever thought would ever be associated with anything Rivendell. Before removing my single legged kickstand, I experimented this week and pr

[RBW] Re: Fenders: Cream or Silver?

On Friday, August 21, 2015 at 9:17:49 AM UTC-7, Arthur Mayfield wrote: > > Green Sams need silver fenders, imo. In the end, I think I've decided > that cream Longboards are just too much of a good thing, but it's > admittedly a personal preference. > > And what is wrong with green and cream?

[RBW] Re: MKS sneaker pedal

If you have access to a bench top grinder its advisable to reduce the circumference of the nickel just-a-bit. Don't just jam them in there. I popped my nickels out this year for the pedals annual service ... no problem. There's a notch in the pedal just for this purpose. I too, just like E

[RBW] Re: How to get out Brooks sit bone divets sop the rear frame down;t dig into my rear end.

I'm not familiar with the Flyer but if it is like the Conquest, which I have, the rails run lengthwise just about 1/4 - 1/2 inch below the leather so it doesn't take much to be riding the rails. Just yesterday, I took some fairly dense yet pliable packing foam I got at work and stuffed it betwee

[RBW] Re: Tested 6 pairs of 700c (29in) tires - results and impressions

Seems to me that if differences can only be detected under carefully controlled conditions using power meters none of these tires are worth all the fuss and expense. I'll stick with my $20 Vittoria Randonneur's. Matt On Sunday, September 6, 2015 at 12:22:40 PM UTC-7, Jan Heine wrote: > > > We'

[RBW] Re: The Impossible School Commute

The eyes lie. Watch the wheels! But if you are walking and making eye contact you are probably safe. Matt On Wednesday, September 9, 2015 at 2:28:36 PM UTC-7, LeahFoy wrote: > > We make eye contact with drivers before walking our bikes in the > crosswalks, so we KNOW they see us. -- Yo

[RBW] Tour Guide from RBW Headquarters to the Picnic on Sunday?

I'm just throwing this out there to see if anybody would be interested in leading some of out-of-towner's to and from the picnic on Sunday. Someone familiar with BART and the bike routes in SF. I only suggest RBW Headquarters as a starting point because I'm thinking this might be a decent pla

[RBW] Re: Tour Guide from RBW Headquarters to the Picnic on Sunday?

Oh, and I forgot. I'm aware of the other ride from the Marin Headlands, but that is too far of a drive. I will be coming from the Sacramento area. Matt On Wednesday, September 16, 2015 at 5:59:01 PM UTC-7, hangtownmatt wrote: > > I'm just throwing this out there to see if

[RBW] Re: Tour Guide from RBW Headquarters to the Picnic on Sunday?

F (which puts you a bit > closer to Chrissy field). Or just bart from Walnut Creek all the way to > Embarcadero. Lots of options, depending on what kind or riding you're > looking for to get there. I ride these routes all the time so happy to help > plot it out if need be. > &

[RBW] Re: Tour Guide from RBW Headquarters to the Picnic on Sunday?

, September 17, 2015 at 9:11:21 AM UTC-7, dstein wrote: >> >> Hey Matt - The marin headlands ride I'm leading leaves from near the >> Ferry Building by the Embarcadero BART which you'll need to pass at some >> point, so if you're interested in parking in Waln

[RBW] Re: MUSA Pants?

I find it hard to believe the long MUSA pants in various colors were not a popular high volume product. I wear them all winter long. I was very disappointed when they were cancelled, but I wouldn't pay $100 +. Matt On Thursday, September 24, 2015 at 6:30:22 AM UTC-7, Matthew J wrote: > > Just

<    1   2