[RBW] Re: Proto Bombadil on Diablo

2012-11-05 Thread Jim M.
And as an added bonus, the proto doesn't have lawyer lips, though mine has an odd 26.8 seatpost. Took it on its first commute today. There's a radar sign on the way. I'm just as fast on the Bomba as on my previous skinnier tire commute bike, not that speed matters of course. jim On Sunday, No

[RBW] Re: Who rode their bicycle to vote in the US today?

2012-11-07 Thread Jim M.
om me. Some large national businesses have been very obvious about spending money on causes I disagree with, so I don't give them my money any more. jim m wc ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this di

[RBW] Re: RBW garage sale

2012-11-15 Thread Jim M.
limbs Diablo by road, and a group that does some mixed terrain rambling. I'd be up for anything but it turns out my daughter's last x-country meet (regional championships) is that morning. So shop well and have a good ride! jim m -- You received this message because you are subscrib

Re: [RBW] Confession! I bought a mountain bike

2015-10-01 Thread Jim M.
to race the Tour Divide, I'd take the Niner, but for most other long tours I'd take the Bombadil. Both are great bikes. jim m wc ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and st

[RBW] Re: What bar for a Bontrager Race Lite?

2015-10-31 Thread Jim M.
You can hacksaw the bars narrower. You can also use a shim to fit a 1 1/8" stem. I'll check my parts drawer -- I may have a shorter 1" threadless stem. jim m wc ca On Saturday, October 31, 2015 at 8:54:01 AM UTC-7, Patrick Moore wrote: > > I got a very nice 1996 Race Lite

Re: [RBW] Help with a tubeless conversion

2015-11-07 Thread Jim M.
, I add air weekly so they don't deflate completely. You may want to add another ounce of sealant next time you inflate them. jim m wc ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

Re: [RBW] Re: Help with a tubeless conversion

2015-11-07 Thread Jim M.
obably works" tire, I've had problems like you're having. jim m wc ca On Saturday, November 7, 2015 at 11:03:20 AM UTC-8, Patrick Moore wrote: > > I spoke without thinking sufficiently. What I recall is reading somewhere > that someone used the EQ 21s for tubeless setups,

[RBW] Re: Copper bottles??

2015-11-13 Thread Jim M.
n an unlined copper vessel, and I'd be hesitant to drink water that sits for a while in one. Pretty, though. jim m wc ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails f

[RBW] Re: Mount Diablo trails ride

2015-11-13 Thread Jim M.
o way discouraging any of these rides. Just be prepared for some walking (which itself can be difficult on some of the trails), and for the ride to probably take longer than you estimate. I'd also advise taking some food to prevent bonk. jim m foot of mt diablo, ca -- You received this m

[RBW] Free bike books

2015-12-05 Thread Jim M.
Doing some de-cluttering and I've got 5 books you can have for shipping cost. *Eat Bacon, Don't Jog* - no explanation needed *Ghost Trails* - Jill Homer's "chilling" story of riding the Iditarod trail *Full Tilt* - Devla Murphy's tale of riding from Ireland to India in 1963 *The Lost Cyclist* -

[RBW] Re: Free bike books

2015-12-05 Thread Jim M.
Books are claimed. Thanks Jim On Saturday, December 5, 2015 at 11:49:02 AM UTC-8, Jim M. wrote: > > Doing some de-cluttering and I've got 5 books you can have for shipping > cost. > > *Eat Bacon, Don't Jog* - no explanation needed > *Ghost Trails* - Jill Homer'

[RBW] Re: Bombadil Tire Clearance

2015-12-07 Thread Jim M.
I have a 56cm proto-Bomba. I'm running WTB Beelines tubeless, and they measure 55mm wide. These have low profile knobs and I get about 5 mm clearance at the bridge. There is only a little more clearance at the fork crown. It has been a problem in sticky mud. jim m wc ca On Sunday, Decem

[RBW] Legolas on Ebay

2015-12-22 Thread Jim M.
An orange, 62 Legolas is on Ebay. Rarer than hen's teeth, grab it if you've been waiting for Riv's raciest bike. Not mine. http://www.ebay.com/itm/Rivendell-Legolas-cyclocross-bicycle-/391345516351?hash=item5b1e02af3f:g:e3sAAOSwfZ1Waw71 jim m wc ca -- You received this message

[RBW] PSA: Eroica California early registration

2015-12-30 Thread Jim M.
just posting this as a reminder, and not trying to start a polemic. But I know some of you can't resist whining about the rules or caviling in general, so let the kvetching begin. Winter cheers! jim m wc ca -- You received this message because you are subscribed to the Google Groups "RB

Re: [RBW] Re: Paul brakes recommendation

2016-01-04 Thread Jim M.
On Monday, January 4, 2016 at 11:27:54 AM UTC-8, dstein wrote: > > (any recommendations for a mechanic in Oakland? I've been using Hank and > Frank on College Ave just for proximity to my house). > > Cyclesports on Grand has a mature mechanic (i.e., 50 or so) who knows his

[RBW] Re: Back to the Drawing Board for Kid Bike

2016-01-06 Thread Jim M.
ly are coming up too high, raise the seat. My kid's first 20-in bike was a p.o.s. from a department store. The crank did not turn smoothly and was not rebuildable. He had fun on it and got hooked on biking anyway. If you really want to improve the bike, you could get lighter tires and add a

[RBW] Re: Nomenclature

2016-01-13 Thread Jim M.
I'll send $10. I could use 3. How about t-shirts too as long as you have the design? jim m the creek On Wednesday, January 13, 2016 at 2:59:21 PM UTC-8, David Banzer wrote: > > I'm in for 5. > David > Chicago -- You received this message because you are subscribed to

Re: [RBW] Re: The newest BLUG

2016-01-13 Thread Jim M.
On Wednesday, January 13, 2016 at 2:42:59 PM UTC-8, Tim Gavin wrote: > > But then they're enabling your bridge-jumping habit! :P > > On Wed, Jan 13, 2016 at 4:35 PM, dougP > > wrote: > >> If I'm drowning, I want someone to throw me a life preserver. I don't >> care if they're in a kayak or the

Re: [RBW] What’s the largest cassette

2018-07-19 Thread Jim M.
FYI - An 11-speed Shimano mountain cassette will fit on a 9-sp hub. But then you'd also want an 11-sp derailer and shifter. Not all that expensive, IMHO. I just made the switch on my non-Riv mtb. On Thursday, July 19, 2018 at 11:20:05 AM UTC-7, Tim Gavin wrote: > > Yep, the 8- and 9-speed XT rea

[RBW] Re: ISO inexpensive but decent utility bike; possible large BMX or possibly city bike with kickback hub

2018-07-21 Thread Jim M.
the derailleur limiting screws to whatever gear works best. Or put it in the middle ring, take off the front shifter, and let him have 7 rear gears. jim m walnut creek ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscr

[RBW] Re: Anyone tried Brooks rubber Cambium bartape?

2018-07-26 Thread Jim M.
In a recent Blahg, Grant plugged Arundel, https://www.arundelbike.com/. They make Gecko tape, which is my favorite padded tape. On Thursday, July 26, 2018 at 7:52:57 AM UTC-7, Arthur Mayfield wrote: > > I should add that Cinelli "cork" tape is about the most comfortable I've > used, other than

[RBW] Seen at RBW Today -- New MTB proto?

2018-07-26 Thread Jim M.
Parked at RBW today -- could this be the new MTB proto? -- You received this message because you are subscribed to the Google Groups "RBW Owner

[RBW] Re: Seen at RBW Today -- New MTB proto?

2018-07-26 Thread Jim M.
The real reason I was there was to pick up my repaired and repainted Bombadil, which looks like this: -- You received this message because you ar

[RBW] Re: Seen at RBW Today -- New MTB proto?

2018-07-26 Thread Jim M.
On Thursday, July 26, 2018 at 8:15:44 PM UTC-7, Joe Bernard wrote: > > Hey Jim, did you see any Sparkly Orange Roadinis or Sams? I did not. I don't think they're in or unpacked yet. The showroom seemed pretty empty, and I kinda just had eyes for my preciou. I did see a Legolas that had been

[RBW] Re: Seen at RBW Today -- New MTB proto?

2018-07-27 Thread Jim M.
Glad y'all like it. That's a D&D paint job, so Rick gets the credit. I hope to get it built and dirty it a bit this weekend. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it,

[RBW] Re: Seen at RBW Today -- New MTB proto?

2018-07-29 Thread Jim M.
On Sunday, July 29, 2018 at 6:44:55 AM UTC-7, Virgil Staphbeard wrote: > > Wow, that's lovely. What's that on the DS chainstay behind the housing > stop? > >> >> When you asked, I wondered too. So I went to the garage to look. Apparently it's just a trick of the light, maybe caused by the transpa

[RBW] Re: Bullmoose Bars - Your Experiences?

2018-07-31 Thread Jim M.
rides with the bullmoose, no problem. jim m walnut creek ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegrou

[RBW] Re: urban/city tire rec: 650b, 38mm or so

2018-08-26 Thread Jim M.
Schwalbe G-One Allround is a nice tire in 650x40. I also have the Allround in 650x57 set up tubeless. For a nice budget tire, I like the Conti Tour Rides that I got from Riv. Wired bead, $22, a continuous center strip so it rolls pretty well, and they've been bombproof for me. On Saturday, Augu

[RBW] Re: WTB 58 Hunq

2018-08-28 Thread Jim M.
There's a complete 59 Hunq on sale at Riv: https://www.rivbike.com/collections/web-special-framesets-and-bicycles/products/bicycle-hunqapillar-59cm-650b-web-special-complete On Monday, August 27, 2018 at 9:29:09 PM UTC-7, Kurt Manley wrote: > > I have a friend in the bay area who's looking for a

[RBW] Re: Not so permanent Basket + Rack

2018-08-31 Thread Jim M.
On Thursday, August 30, 2018 at 10:47:46 PM UTC-7, Vincent Tamer wrote: > > Anyone got any ideas for a detachable wald setup? I put my Wald on top of a CETMA Halfrack. The Halfrack attaches at the dropouts and brake bolt, so it's pretty easy to remove the whole thing when I don't want that muc

Re: [RBW] Re: Likely FS soon: Rambouillet 60 & Legolas 59

2018-09-03 Thread Jim M.
Mark once showed me the specs they sent to the frame builder for Legolas and Roadeo. They have the same tubing for top and seat tubes, fork blades and chain stays but I don't remember those thicknesses. The Legolas downtube is slightly heavier at .7/.5/.7 vs .65/.45/65 for the Roadeo. On Mond

[RBW] Re: MTB on the Blahg (again)

2018-09-11 Thread Jim M.
In the spirit of A Homer, et alia, I like Welton S. Bisolugs -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. T

[RBW] 650B conversion for my Road Standard?

2018-10-31 Thread Jim M.
If you're in the Bay Area, I have enough spare parts (wheels and brakes) you can borrow to try a conversion. jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: Errandonneering 2018

2018-03-31 Thread Jim M.
i read the title to mean "err" randonneering. I applaud "errand" randonneering but I find "err" randonneering more fun. happy trails jim m walnut creek ca On Friday, March 30, 2018 at 7:02:40 PM UTC-7, Deacon Patrick wrote: > > Hey Tom! Aye, 44s fit, at leas

[RBW] Re: Gearing for Quickbeam

2018-04-06 Thread Jim M.
I saw several track bikes when I rode Eroica. Also, Lucian Berrutti rode this: [image: Image result for luciano berruti eroica] So it's certainly possible, but challenging. good luck jim m walnut creek, ca On Friday, April 6, 2018 at 7:55:15 AM UTC-7, Sean Kline wrote: > > I’ve l

[RBW] Re: Have a Sub 20lb Roadeo?

2018-04-13 Thread Jim M.
Great looking Legolas! But you could shave off a little more weight if you did like P Moore and Dremel'ed off the rack eyelets. jim m walnut creek, ca On Friday, April 13, 2018 at 11:11:52 AM UTC-7, Bill Lindsay wrote: > > > On January 30th I asserted that it should be straightfo

[RBW] Re: Quickbeam vs Roadeo/Legolas

2018-04-17 Thread Jim M.
a Legolas. I've been able to ride Roadeos too, and they feel a lot like a Legolas. I notice the slightly lower bottom bracket height, but I don't think that's better or worse. jim m walnut creek, ca On Monday, April 16, 2018 at 7:52:16 PM UTC-7, Mojo wrote: > > John, > &g

[RBW] Re: 137 Wald + Which Front Rack?

2018-04-27 Thread Jim M.
I like the Mark's rack a lot, but for a basket with more capacity I use a CETMA Halfrack: https://cetmacargo.com/products/cetma-halfrack I think I traded a Mark's rack to someone on the list for the CETMA. jim m wc, ca On Friday, April 27, 2018 at 8:43:40 AM UTC-7, tc wrote: > &g

Re: [RBW] OT but mentioned on the Blahg: Hiking

2018-05-04 Thread Jim M.
If you're of a certain age, and haven't hiked in a while, the first hike may make you aware of a bunch of muscles you didn't know you had, even if you're in good bike shape. A lot of clauses in that sentence, but I think you get my drift. happy trails. jim m walnut creek,

[RBW] Re: What do Riv riders like for front low rider racks?

2018-06-02 Thread Jim M.
Contact Joe B on this list and see what he has from his massive stash of Bruce Gordon racks. jim m walnut creek, ca On Saturday, June 2, 2018 at 7:28:05 AM UTC-7, Edwin W wrote: > > I have a Joe Appaloosa with a Mark’s rack, Wald medium and a rear > rack.That is all fine and good,

[RBW] Re: What do Riv riders like for front low rider racks?

2018-06-02 Thread Jim M.
I forgot there's at least 2 Joe B's on the list. Here's part of the stash: https://www.flickr.com/photos/joe_bunik/page4 On Saturday, June 2, 2018 at 8:49:38 AM UTC-7, Jim M. wrote: > > Contact Joe B on this list and see what he has from his massive stash of > Bruce

[RBW] Re: Is this an insane idea?

2018-06-06 Thread Jim M.
Do it, and then post pics. The QB is one of my favorite bikes for handling and ride quality, and I thought of asking Riv for a QB with der hanger. Blasphemers can be forgiven. jim m walnut creek, ca On Wednesday, June 6, 2018 at 4:54:35 PM UTC-7, Eric Karnes wrote: > > So, I've bee

[RBW] Re: Definishing the Hunq

2018-07-03 Thread Jim M.
Looks very sharp! Nice job. I had a raw Bombadil, which I really liked. The finish deteriorated over about 8 years. I was tempted to have the clear coat redone, but when the frame needed repairing I went ahead and had it painted by D&D. I'm supposed to get it back this week. jim

[RBW] Re: Quickbeam wheelset

2017-12-07 Thread Jim M.
It's not difficult or expensive to replace the axle with a 130. You can even get a solid axle if you want. jim m walnut creek On Thursday, December 7, 2017 at 8:36:55 AM UTC-8, Belopsky wrote: > > Yep, they are QR. This answers my questions > > Thanks > -- You received

[RBW] Re: 650b tires: the fat and the skinny about them?

2017-12-15 Thread Jim M.
I run Compass Loup Loups 650x38 on my converted Merckx Corsa. It's a fast, nimble frame and the Loup Loups are light and roll well to complement the frame characteristics. I haven't tried a narrower tire because with the LL's the bike is my ideal combination of cushy and quick

[RBW] Re: Care to share experiences converting to SS using White Industries ENO Eccentric?

2017-12-16 Thread Jim M.
I've used both the ENO eccentric hub and the Philcentric BB. My experience has been good with both. For ss freewheeling, the cheaper option is to use a tensioner like the Soulcraft Convert: http://www.soulcraftbikes.com/convert.php But for a fixed conversion, eccentricity makes it easier than

Re: [RBW] Re: Care to share experiences converting to SS using White Industries ENO Eccentric?

2017-12-16 Thread Jim M.
On Saturday, December 16, 2017 at 9:55:59 AM UTC-8, Patrick Moore wrote: > > That Philcentric looks interesting; I've never seen it before. But I > expect that the Q for any external bearing crank is wider than for what you > can find in a square tape system? I'd be happy to be corrected. I know

Re: [RBW] Re: Homer as a brevet bike: Keep on the rear rack?

2017-12-29 Thread Jim M.
Here's a pic of Lon at PBP 2003 with his custom Riv, not a Quickbeam, which I've read had 3 cogs in back with no derailleur: http://www.randonneurs.bc.ca/Resources/pbp_misc/2003/5823_lon-haldeman.jpg Eric Norris of this group actually rode PBP fixed on a QB. -- You received this message because

[RBW] It looked like just a little stick...

2018-01-03 Thread Jim M.
6UK5hL6fhDolgn-Ve5eL0Q9LUqbDwcfMSRohPjAIbcn99lPCC5C9gCTyitsUmJALLH3EYNdh2k_1SWIhpy4IIqM2NS01I8k7HNqtpCuo93pKAVy0r8amh46ypp6peGqdY3hiy2G40ruCskuq9QHAaaLkSufPeoOngJBFWTPzdnptF5p8Rg0EG1ZpBFX7gKw4eHAUFCS_TYjpbfNp_BJ50P_d5NpHxY_qACCRXJBIgRF5vgNnSOUp5r6k5QDmXq35riE=w1266-h949-no> happy trails! jim m walnut creek, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and st

[RBW] Re: It looked like just a little stick...

2018-01-04 Thread Jim M.
Photo links: *Bent hanger

Re: [RBW] Know Anybody in Lake Nacimiento?

2018-01-04 Thread Jim M.
There's also https://www.warmshowers.org/ , which is dedicated to bicyclists. On Thursday, January 4, 2018 at 9:05:06 AM UTC-8, Eric Norris wrote: > > Thanks! I’ll give it a look. > > --Eric N > campyo...@me.com > www.CampyOnly.com > Campyonlyguy.blogspot.com > @Campyonlyguy > > > On Jan 4, 2018

[RBW] Re: Bikepacking with 38mm knobbies (Compass Steilacooms)

2018-01-04 Thread Jim M.
burp out the sealant. Also, it's not just total weight but distribution of the weight. With all the load over the rear tire, it's going to take more of a beating than if the load was distributed more evenly across the bike. Might as well try it but take extra tubes and a patch repair

[RBW] Re: Bikepacking with 38mm knobbies (Compass Steilacooms)

2018-01-05 Thread Jim M.
On Thursday, January 4, 2018 at 7:50:37 PM UTC-8, Deacon Patrick wrote: > > Jim, there are quite a few photos of Dunlap tire ads in the outback in > that era. I’m reading “Bicycles in the Bush” I've read "Lost Cyclist" but hadn't seen Bush. Thanks for pointing that one out. I guess the revolu

[RBW] Re: It looked like just a little stick...

2018-01-05 Thread Jim M.
t more rust than I thought once I dismantled the bike. I'll probably try to find a color that looks like the steel, though I'm open to suggestions if anyone wants to chime in. happy trails! jim m walnut creek, ca -- You received this message because you are subscribed to the Go

Re: [RBW] Single speed handlebar recommendations

2018-01-06 Thread Jim M.
a lot too and ran them on my QB. Enough drop for long downhill tucks, with plenty of leverage for uphill grunts. jim m walnut creek, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop recei

[RBW] Re: Happily Gratefully Riding My Hunqapillar Again

2018-01-06 Thread Jim M.
I'm happy your Hunq is back on the road. Looks very similar to my Bombadil problem. I really enjoy your pictures of riding in Japan. I left Japan in 1960 but hope to get back soon. jim m walnut creek ca On Monday, December 21, 2015 at 9:00:18 AM UTC-8, Takashi wrote: > > SH

[RBW] Re: Not ugly quill to threadless: Can it be done?

2018-01-21 Thread Jim M.
rs on my Bombadil. I don't bother much with aesthetics, but even to me it was ungainly and ugly. Also, it required an unusually large amount of tightening to keep it from slipping. jim m walnut creek, ca -- You received this message because you are subscribed to the Google Group

[RBW] Re: Seeking Single Speed Crank Recomendations

2018-01-30 Thread Jim M.
of getting power to the wheel. jim m walnut creek, ca On Tuesday, January 30, 2018 at 10:02:42 AM UTC-8, Deacon Patrick wrote: > > Bill brings up the excellent point of the meaning of “best value.” To me > value means: provides high ride quality, experience, dependibility, and >

Re: [RBW] Re: Have a Sub 20lb Roadeo?

2018-01-31 Thread Jim M.
r. I'm getting a threaded NItto that has a removable faceplate, so it's the best of both worlds, I hope. jim m walnut creek, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiv

[RBW] Re: Are you using your real name on here?

2018-01-31 Thread Jim M.
On Wednesday, January 31, 2018 at 3:15:34 PM UTC-8, Garth wrote: > > > ..*My Name is Nobody* ... > > Man I really do love the Trinity series of movies and all the spaghetti > westerns :-) > > I'm Nobody! Who are you? Are you - Nobody - too? Then there's a pair of us! Dont tell! the

[RBW] Re: I'll be at Riv and need some suggestions about the local area

2018-02-12 Thread Jim M.
esidio.gov/places-internal/Shared%20Documents/Goldsworthy-Brochure.pdf jim m walnut creek, ca On Monday, February 12, 2018 at 5:14:58 PM UTC-8, REC wrote: > > If this is too off topic, I'm sure the moderator will delete. I know a > lot of you live in the area and would love your

[RBW] It's a beautiful day in the (RBW) neighborhood

2018-02-19 Thread Jim M.
GAs/s1600/IMG_20180219_165206721.jpg> <https://lh3.googleusercontent.com/-fQro3YBqhjo/WouWJdmwU2I/Cag/yU2ciW5LTQoj2JJwQiXjKUokU6LBE3j-gCLcBGAs/s1600/IMG_20180219_165206721.jpg> happy trails, jim m walnut creek, ca -- You received this message because you are subscribed to

[RBW] Re: Riv request for store credits

2018-02-21 Thread Jim M.
me. Did you buy credits? I did. jim m walnut creek ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.c

[RBW] Re: Wool Repair? - SF Bay Area (or elsewhere if they have mad patching skillz...)

2018-02-25 Thread Jim M.
sults really are impressive. 91 Gregory Lane, Pleasant Hill, 925.825.2327 jim m walnut creek, ca On Saturday, February 24, 2018 at 8:11:57 AM UTC-8, Cyclofiend Jim wrote: > > Hey all - > > Was going through some jerseys and remembered that there was one with a > hole and a few

[RBW] Re: Wool Repair? - SF Bay Area (or elsewhere if they have mad patching skillz...)

2018-02-25 Thread Jim M.
On Sunday, February 25, 2018 at 6:22:25 PM UTC-8, Deacon Patrick wrote: > > Jim, does she repair the wool between the ears of a muttonhead? Grin. > > Of course, but off-road fixed gear muttonheadedness is extra. jim m walnut creek, ca -- You received this message because you are s

[RBW] Re: First pedestrian killed by autonomous car

2018-03-19 Thread Jim M.
On average, there are 3,300 car accident fatalities each day in the US. All the research I've seen so far says autonomous cars are better than humans. At least, they don't look at their phones while driving. -- You received this message because you are subscribed to the Google Groups "RBW Owne

Re: [RBW] First pedestrian killed by autonomous car

2018-03-19 Thread Jim M.
On Monday, March 19, 2018 at 3:58:21 PM UTC-7, Steve Palincsar wrote: > > Since computer driven cars are basically still in the laboratory > I'm not going to argue that autonomous cars are ready for prime time, but they're still in the lab only if you consider the streets of Mountain View, the

[RBW] Re: Looks like 50 cm Roadinis sold out. So much for small frames not selling.

2018-03-19 Thread Jim M.
Congratulations on your first Riv! The Roadini is a great riding bike, as are all Rivs in my opinion. We do want pictures when you can. jim m walnut creek, ca On Saturday, March 17, 2018 at 10:31:23 AM UTC-7, Linda G wrote: > > I might be wrong, but it appears that this size sold out

[RBW] Re: First pedestrian killed by autonomous car

2018-03-20 Thread Jim M.
On Tuesday, March 20, 2018 at 5:34:28 AM UTC-7, Mark in Beacon wrote: > > Your daily car accident fatality figure is wildly incorrect. It would put > the yearly total at over 1.2 million fatalities, when the actual figure is > 40,000. Which of course is bad enough. > > Sorry, I cited world figu

[RBW] Re: Homer Hilsen stolen in San Francisco

2018-03-24 Thread Jim M.
Here's a recent thread about a stolen SF bike that was recovered in a homeless camp: https://groups.google.com/forum/#!searchin/rbw-owners-bunch/homeless%7Csort:date/rbw-owners-bunch/V5OGQ7ipEmM/YOStom1TAQAJ good luck! On Saturday, March 24, 2018 at 9:13:57 AM UTC-7, Tom McIntyre wrote: > > we l

[RBW] Re: Happy Retirement Bob!

2019-11-25 Thread Jim M.
One of my favorite ads from back in the day: On Monday, November 25, 2019 at 7:25:02 AM UTC-8, masmojo wrote: > > Another reminder that I am slipping into decrepitude. I remember getting > Bridgestone catalogs with him modeling. I had a Pineapple Bob t-shirt!! > I have been feeling rather no

[RBW] Re: Thin Gripster alternatives?

2019-12-08 Thread Jim M.
> I've been using Thin Gripsters without a problem, but Rob's review convinced me. I was in need of pedals for the Clem I'm building, and I found the Vice for about $35. At first I thought the price was per pedal, but no, that's for two. So seems like a pretty good deal. jim

[RBW] Re: Riv Atlantis MTB Video

2019-12-13 Thread Jim M.
Excellent work! Reminds me of the videos that Jay Ritchey did for RBW. Did you use an iphone? jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Re: Still deciding whether you folks are a good influence or a bad influence...

2020-01-02 Thread Jim M.
I have a slipping post on my new Clem too. Vince told me a 27 won't fit. He said they could knurl the post to fix the problem. Luckily they're just down the street from me so I'm going to stop by and let them knurl away. Give them a call. They'll help. jim m wc, ca -

[RBW] Re: Evolution of Riv SS Designs?

2020-01-15 Thread Jim M.
I had Big Apple 50s on my orange QB. Here's a pic <https://bit.ly/2QYhdeZ>. Close fit, and not much room for adjusting forward/backward, but quite comfy. jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group

[RBW] Re: Evolution of Riv SS Designs?

2020-01-15 Thread Jim M.
On Wednesday, January 15, 2020 at 7:52:03 PM UTC-8, Philip Williamson wrote: > > Whoa. Holy clearances, Batman! > I had Bruce Gordon Rock n Roads on my first run green Quickbeam. I think > 38s and fenders are where it’s at, though. For that bike. > > Yes, I agree. The Big Apples were cushy but m

[RBW] Re: How & when & why did you find Rivendell? What was your first bike or part from them?

2020-01-19 Thread Jim M.
well, and I got hooked. happy trails! jim m walnut creek, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googl

[RBW] Re: Drop bar on MIT Atlantis?

2020-02-26 Thread Jim M.
Here's a famous MIT Atlantis with drops: https://theradavist.com/2019/01/ultra-romance-and-his-rivendell-atlantis-mountain-bike/ On Wednesday, February 26, 2020 at 4:00:13 AM UTC-8, John G. wrote: > > I have a bunch of parts in need of a 700c frame, so I’ve been pondering my > next build. I mi

[RBW] Re: WTB: Pass And Stow 5 rail rack

2020-03-14 Thread Jim M.
i have a CETMA Half Rack, https://cetmacargo.com/products/cetma-halfrack, you can have cheap if you want. jim m wc, ca On Saturday, March 14, 2020 at 2:17:40 PM UTC-7, Justin, Oakland wrote: > > Color neutral. > > Thanks! > -J > -- You received this message because you

[RBW] Re: WTB: Pass And Stow 5 rail rack

2020-03-15 Thread Jim M.
On Saturday, March 14, 2020 at 4:08:30 PM UTC-7, Jim M. wrote: > > i have a CETMA Half Rack, https://cetmacargo.com/products/cetma-halfrack, > you can have cheap if you want. > >> >> Sorry for any confusion, I did not look closely at the link. I have an earlier version

[RBW] Re: WTB: Pass And Stow 5 rail rack

2020-03-15 Thread Jim M.
It's gone. Thanks for the interest. Healthy trails! jim m wc, ca On Sunday, March 15, 2020 at 9:48:31 AM UTC-7, Jim M. wrote: > > On Saturday, March 14, 2020 at 4:08:30 PM UTC-7, Jim M. wrote: >> >> i have a CETMA Half Rack, https://cetmacargo.com/products/cetma-halfrack,

Re: [RBW] Re: Crash Stories

2020-03-16 Thread Jim M.
I was descending and got distracted by the beautiful view of Kent Lake. Front wheel caught a rut and down I went. The end of the handlebars punched me in the rib and cracked one. Too painful to ride after that, so I hiked out about 8 miles. jim m wc, ca -- You received this message because yo

Re: [RBW] Re: Nitto Basket Rack Reports and Photos?

2020-03-16 Thread Jim M.
My new Clem with basket rack. I like it a lot, and it mounted easily. The Clem does have a lot of eyelets. Sheltering in place in Walnut Creek, jim m -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: daily post ur riv

2020-03-20 Thread Jim M.
some bike camping when things are less crazy. happy trails! jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsub

Re: [RBW] Semi OT post? - What bike would you take to the Himalayan foothills? And would you even go?

2020-03-23 Thread Jim M.
anent. happy trails, jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discus

Re: [RBW] Big 'Un, and flooding, minor

2019-05-17 Thread Jim M.
Rattles are pretty obvious on a snake that big. [image: Image result for rattlesnake rattle] I'm gonna guess a rat snake, which has a triangular head but is not a viper: On Friday, May 17, 2019 at 4:28:30 PM UTC-7, Patrick Moore wrote: > > It did occur to me after I posted that i couldn't see

[RBW] PSA: 67cm Homer on SF CL

2019-05-18 Thread Jim M.
Looks like a heckuva deal: https://sfbay.craigslist.org/sfc/bik/d/san-francisco-67cm-rivendell-homer/6892228413.html 67cm -- you need to be what, 6'8" or so? Not mine and I don't think I know the seller, but willing to help facilitate. jim m wc, ca -- You received this message

[RBW] Re: rebuilding the SimpleOne

2019-06-30 Thread Jim M.
road gears. Though here in Mt Diablo territory, the steep climbs had me switching to my 24" gear (two feet) plenty. happy trails! jim m. wc, ca On Saturday, June 29, 2019 at 11:55:09 AM UTC-7, jandrews wrote: > > Thanks Patrick > No it's not a new bike for me. I bought it new

Re: [RBW] Re: RBW at 25: The Fellowship of the Rigs

2019-07-13 Thread Jim M.
I missed the 20th and now I'll be out of town for the 25th. Well, I guess I'll wait until the 30th. Somebody bring a cake. It's a birthday year for Grant -- one of those half decade milestones that is deemed significant in western culture. Mmmm, bacon cake! jim m wc, ca On Sa

[RBW] Rivendell's new "lifestyle brand"

2019-07-23 Thread Jim M.
Seen on the streets of Walnut Creek recently (steel framed, leather upholstered condos?): -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch

[RBW] Re: ideas for daytime visibility: vests and whatnot

2019-09-27 Thread Jim M.
Nott mentioned in this thread yet (but I think I saw a previous discussion, maybe on iBoB) is the pool noodle: [image: Image result for pool tube as bike safety] https://www.sfgate.com/travel/resources/transit/article/pool-noodle-bicycle-safety-protected-lane-bike-13923482.php# -- You received

[RBW] Re: 8-tooth spread on QB/SO track-ends

2019-10-14 Thread Jim M.
8-tooth is the max I could get, and that was with 700x33 tires. Larger tires reduced the achievable spread because they can't move as far forward between the chainstays. On Monday, October 14, 2019 at 3:24:57 PM UTC-7, j.schwartz wrote: > > Curious if the 8-tooth "max" spread can be pushed by a

[RBW] Re: Philadelphia Bike Expo Nov 2 and 3. Rivendell to exibit

2019-10-30 Thread Jim M.
Will & Vince are great guys, so if you haven't met them be sure to do so. And at least take them for a beer or dinner. They work hard for y'all. jim m wc, ca On Wednesday, October 30, 2019 at 4:36:33 PM UTC-7, REC (Roberta) wrote: > > https://phillybikeexpo.com/ > > Ri

[RBW] Re: daily post ur riv

2019-11-05 Thread Jim M.
Well, I haven't gotten around to taking pics myself, so I'll post a link to a couple that Will took of my repainted Bombadil: https://www.instagram.com/p/Bz_rNxzH_oX/ jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners B

Re: [RBW] Re: daily post ur riv

2019-11-05 Thread Jim M.
On Tuesday, November 5, 2019 at 4:15:39 PM UTC-8, Reid Echols wrote: > > That Bombadil is aspirational. This is as close as I've gotten to an MTB > Riv: > Beautiful Appaloosa! Looks like an MTB to me. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bu

[RBW] Re: It's getting to be that time of year again: Time to order stuff from Rivendell

2019-11-07 Thread Jim M.
I just bought one of these: https://www.rivbike.com/products/a7s5klhjwe-oith-lk5465a?variant=20741323161711&utm_source=esc&utm_medium=email&utm_campaign=nowbackinstock jim m wc, ca On Thursday, November 7, 2019 at 10:30:46 AM UTC-8, Bill Lindsay wrote: > > This quote sums

[RBW] Re: It's getting to be that time of year again: Time to order stuff from Rivendell

2019-11-07 Thread Jim M.
not. I didn't want to miss out this time so I just bought it. And I'm fairly confident I won't exceed whatever the limit is. jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group

Re: [RBW] Re: It's getting to be that time of year again: Time to order stuff from Rivendell

2019-11-09 Thread Jim M.
FYI -- RBW got 60 of the new front racks and they're down to 30, so don't lose out. jim m wc, ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, s

[RBW] Re: It's getting to be that time of year again: Time to order stuff from Rivendell

2019-11-12 Thread Jim M.
On Tuesday, November 12, 2019 at 6:55:32 AM UTC-8, Justin Kennedy wrote: > > anyone know if the basket racks are actually on hand at Riv or en route? > I picked mine up in person, so I know they're here. 26 left, so it's not yet too late. jim m wc, ca -- You received this

[RBW] Re: RBW / BQ inspired steel lugged custom

2016-08-05 Thread Jim M.
On Friday, August 5, 2016 at 10:02:38 AM UTC-7, Joe Bernard wrote: > > I'd love to see it. Who's the builder? Sacramento lugged bike builder -- gotta be Steve Rex. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this g

<    1   2   3   4   5   6   7   8   9   >