[RBW] Re: WTB: Wide range double crankset

I have had great luck using the IRD QB-95 BB (127.5) with the AT cranks, at times using a drive side spacer (sorry I do remember but I will guess at 3-5mm for the spacer). http://boulderbicycle.bike/IRD-JIS-Bottom-Bracket-QB-95-lots-of-sizes-best-bb-option-REGARDLESS-of-cost.html The AT's are g

[RBW] Re: WTB: Wide range double crankset

I am not expert enough to explain where the differences come from, but different cranks use different bb spindle lengths to get the same configuration. The Sugino AT's just happen to use a relatively long spindle but once installed they clear the chainstays exactly as they should. That said,

[RBW] Re: FS: 62cm Appaloosa F/F/HS

David, Here is a chart from the Riv site: https://www.rivbike.com/pages/pubic-bone-height-how-to-measure-your-pbh Bob On Sunday, January 17, 2021 at 8:13:00 AM UTC-6 David Wadstrup wrote: > Good morning, Bones, > > Just sent a PM. > > > Is anyone able to tell me what the PBH range is for this

[RBW] FS: Bikes and frames for now... Bags, components, misc. to follow

the next week or so, either here or on Ebay. If it seems appropriate to the group, I will try and list things here first. Thanks, Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

Re: [RBW] Re: FS: Bikes and frames for now... Bags, components, misc. to follow

too > expensive for their budget. > > Edwin > > On Thursday, July 30, 2020 at 12:41:28 PM UTC-5, Bob Lovejoy wrote: >> >> (Cross posted with the iBob list)... >> >> I am finally getting around to listing some bikes and frames that need to >> find new h

[RBW] A few Cheviot sweaters available...

I noticed there were a few of the Cheviot sweaters back up on the site. Small, medium and large I think. With the weather starting to change in places, might be good to plan. And hopefully once these are gone, they will order more, the sweaters and the sweater vests. https://www.rivbike.com/

[RBW] Re: A few Cheviot sweaters available...

Hi Ben, Just my take, and possibly different than others... I think the more slim you are the more the sweaters run true to size. That said, being not as slim as I would like, I sized up and that approach ended up working really well for me (from an XL to 2XL). I normally wear XL shirts and

[RBW] Sweater vests available...

I saw a notification on FB on this... but sorry if I missed it here or wherever. Sweater vests would seem to be available! The note I saw said this was the last run... https://www.rivbike.com/collections/clothing/products/cheviot-woolywarm-vest?variant=31894741057647 Fall weather soon... ju

[RBW] Re: Wool Cycling Hat

On Sun, Apr 5, 2009 at 2:00 PM, wrote: > My problem is I have a big head (hey, watch it!). I wear a 7 5/8 hat > size and every cycling cap I've tried is too small. Any suggestions short of > knitting my own? > Bill > Louisville, Ky > > > Bill, Bicycle Fixations' hats come highly recommended

[RBW] Re: Best Bag ever

And one more for the count! Bob Lovejoy Denver, CO --~--~-~--~~~---~--~~ You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com To unsubs

[RBW] Re: Fancy modern nitto rack

dougP and others, Can anyone say if there is a natural or built-in way to attach a tail light to the R26? I have no direct experience with the Nitto racks, but in the pictures I have seen, there has not been an obvious mount point. All help appreciated, Bob -- You received this message b

[RBW] Re: Wheelset for '84 Trek 720

I would verify that the existing wheels are 700c. The early 80's Trek 720's were, I believe, spec'ed with 27" wheels. If it uses caliper brakes (which I have seen on some 728's), then it could be no problem. If his 720 has cantilevers, a conversion from 27" to 700c is possible but can make b

[RBW] Re: New additions to my site

accessory(!), for travel and adventures) so one day I will walk through your shop door. It would be great to see Indianapolis and exploring is good... Listening to your podcast even as I type. Thanks for the great work and shop! Keep the faith... Bob Lovejoy Galesburg, IL -- You received

[RBW] Re: silver shifter adapter for Paul thumbies

Jason, The first/top ones I believe. I do have some but they are needed for a build. That said, if I find extras in the parts stash, I will let you know. I did call Paul's at one point to see if they had them directly but they sent me back to Rivendell in my search. Hopefully they will make

[RBW] Re: Building out New Old Stock 2009 Sam Hillborne

I can't speak to the saddle bag issue but be aware the design of the Sam seems to have changed over the years. I think the earlier versions possibly had a bias for swept back handlebars as well as maybe some other changes (versus the current Sam). I could be wrong on that though. Comparing th

[RBW] Re: Building out New Old Stock 2009 Sam Hillborne

Eric, That sounds perfect! Looking forward to pictures of the build and, yes, ride reports! Building up a bike, then riding, tweaking, adding and subtracting, making it your own, can be such a great thing. Congrats again on the new Rivendell! Bob On Wednesday, September 5, 2018 at 10:11:24

[RBW] Re: ISO: The right rear rack

It could be that the Erlen rack they have at A1 Cyclery is not the size you need but I wanted to put it out there. It looks like Chris also has a couple of the larger Bagman racks. https://a1cyclery.com/products/parts/parts-racks/ Bob On Thursday, September 13, 2018 at 9:29:52 AM UTC-5, Eri

[RBW] Re: Clem L 59 -- Considering a purchase

I don't know the odds, but if you tell people your city/town/basic region, it could be there might be one near you, either owned or for sale, that you could test ride. It is just an idea but there are Clementine/L's out there and there is nothing like actually riding a bike before purchase. Th

[RBW] Re: Whatbars.com

There was a good discussion of the tool and its development on the internet-bob list. The admin there created a pinned posting so that this kind of effort could be noted, saved and referenced. This should take you to that pinned summary: https://groups.google.com/d/msg/internet-bob/W0zK2k8PnTM

[RBW] Re: Rivendell Jersey

I am not sure of the history but there were these... https://www.ebay.com/itm/Rivendell-Bicycle-Works-Jersey-2005-Small-Wool-very-rare/232959864082?hash=item363d7d6d12:g:6-8AAOSwdU9bvWIV:rk:2:pf:0 Bob On Wednesday, October 10, 2018 at 12:11:01 PM UTC-5, lconley wrote: > > Interesting reactions t

[RBW] Re: Anyone compared Schwable Almotions to Supremes?

Hi John, Do you have or can you point me to more information on the non-tubeless Almotions you ordered? I am looking at the Schwalbe site now but it seems to imply all of the Almotions are tubeless compatible. I have no need for tubeless, at least on my current wheels, and the tubeless tires

[RBW] Re: Anyone compared Schwable Almotions to Supremes?

Thanks John, It is both a little frustrating and even kind of funny how hard it can be to figure out all of the variations, in the models and sub-models, in the "market speak" labels, etc. I do truly like Schwalble tires and, considering how long I have used them, it seems I should know more!

[RBW] Re: Homer and Sam $100 price difference

I'll add that time and an associated increased cost could be major factors. From the perspective of "older" to "newer", there is the Appaloosa ($1300) to the Hillborne ($1400) to the latest Hilsen ($1500). I know the Cheviot could be considered an outlier in that logic, and in several ways, bu

[RBW] Re: FS: Acorn 'Large' Saddlebag - $75 Shipped CONUS

Hi Jeff, PM sent on the saddlebag. Let me know if it does not come through! Thanks, Bob Lovejoy Galesburg, IL On Tuesday, March 27, 2018 at 12:49:11 AM UTC-5, Jeffrey Arita wrote: > > Dear Bunch, > > I have for sale one remaining Acorn Large Saddlebag in black. This thing >

[RBW] Re: [podcast] Higher, Faster, Rougher, Wilder

Glad to see The Bike Show back! Almost always worth the time and listening... I have it in my podcast feed but thanks for heads-up on this one. It will make great listening on this rainy, coolish midwest day. Bob On Monday, March 26, 2018 at 11:42:54 PM UTC-5, Ash wrote: > > Happen to listen

[RBW] Re: [podcast] Higher, Faster, Rougher, Wilder

Slightly on and off topic, all at the same time... apologies if needed. I have been using "Pocket Casts" for the last few months for my podcast app and have been totally impressed and satisfied. It keeps almost perfect coordination between my Mac and phone (from a listening and download standp

Re: [RBW] Re: Lower price Atlantis!

Agreed, excellent summation! Hopefully it is ok with Eamon to use his notes when studying for the test... I am thinking there is going to be a test, just has to be... right? Anyway, I do applaud Riv for sticking to its design convictions and direction. I kind of wish I needed the new Atlantis!

[RBW] Re: Who swaps out wheel sets to keep from buying new bikes?

certainly to be treated with great respect, logic and discipline. Kind of reminds me of that "you can have any two out of the three". Indeed! Bob Lovejoy Galesburg, IL On Wednesday, March 28, 2018 at 11:57:07 PM UTC-5, Bill Lindsay wrote: > > Inevitably when I run an ext

[RBW] Re: Many nice Sam Hillbornes lately

-stock Do you remember the size of the Berthoud decaleur you are using with the Acorn? No worries if not but if you do know, it would help. Thanks, Bob Lovejoy Galesburg, IL On Thursday, March 29, 2018 at 6:12:27 PM UTC-5, tc wrote: > > I use my 2017 58 Sam for paved greenways and roads.

[RBW] Re: Many nice Sam Hillbornes lately

y exact order and get back to you on the size. > > Tom > > On Thursday, March 29, 2018 at 7:24:48 PM UTC-4, Bob Lovejoy wrote: >> >> ...Do you remember the size of the Berthoud decaleur you are using with >> the Acorn? No worries if not but if you do know, it would hel

[RBW] Re: anybody have VO crazy bar?

-koga-worldtraveller-touring-bike/ Bob Lovejoy Galesburg, IL On Tuesday, April 3, 2018 at 8:12:47 PM UTC-5, Matt Beecher wrote: > > I'm thinking of buying the VO crazy handlebar, but I am looking for > reviews. Has anyone here tried them? If so, would you share your opinions? > &

[RBW] Re: New Atlantis Pre-sale page is up on rivbike.com

am looking at are from the Riv geometry charts and not personally known or verified. Bob Lovejoy Galesburg, IL On Friday, April 6, 2018 at 2:43:12 PM UTC-5, Minh wrote: > > my memory may be off but is the sizing markedly different from the old > atlantis? > -- You received

[RBW] Re: FS: 62cm Hunqapillar complete

. Someone will be very lucky indeed. I love your other choices in the Cheviot and Rambler as well. As they say... you chose well! Anyway, a bump and GLWS. Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch"

[RBW] Re: New Atlantis Pre-sale page is up on rivbike.com

Garth, I am no expert, definitely still learning, but agree with you on stack and reach being very good indicators of fit. The note that Tom posted was good info as well. That said, have stack/reach measurements been posted for the MIT Atlantis? I may have missed them. They would be great t

[RBW] Re: Slightly OT: "How a bicycle is made."

here though: http://www.classicrendezvous.com/British_isles/Rudge_main.htm I think I will spend part of this somewhat wet, dreary midwest day listening again to those podcasts! Bob Lovejoy Galesburg, IL On Saturday, April 14, 2018 at 12:35:31 PM UTC-5, iamkeith wrote: > > From the chainr

[RBW] Re: Slightly OT: "How a bicycle is made."

Hi Brian, I did re-listen to those podcasts and will warn they are a little dry unless the history of things, most especially bicycles, is of true interest. They comprise almost entirely of an interview with Tony Hadland, the knower and keeper of much history. I enjoyed them (again!) but ther

[RBW] People and places and thoughts...

.com http://www.thebicyclestory.com/2010/11/kent-peterson-issaquahs-favorite-car-free-ultra-long-distance-racing-techie-turned-mechanic/ Anyone else have news of people not heard from for awhile but valued, remembered and looked for nevertheless? Bob Lovejoy Galesburg, IL -- You received this message becau

[RBW] Re: Tucson Stolen Bike Alert

sorry you are having to go through all of that. Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubsc

[RBW] Re: When requesting to contacted off list

is out of line from a thread standpoint to do that. It also alerts others, at least unofficially, that you are interested and "in line", something like that anyway. That said, technology can certainly fail, at least fail to work as we expect. Ok, sometimes just fail...! Sorry you mi

[RBW] Re: Made in Taiwan AHH?

on "Frame Sizing" but would sure love to know more. But wait patiently I will... Bob Lovejoy Galesburg, IL P.S. If anyone receives their catalog in the mail, please post to let people know to start looking! -- You received this message because you are subscribed to the Google G

[RBW] Re: Made in Taiwan AHH?

Eamon, Seems like 89-90pbh is somewhat the new dividing line in the recent sizing, at least with the Roadini, Homer, Atlantis, the Appaloosa and Clem H. I have an 89pbh as well, ride a 58cm Appaloosa, and am thinking (maybe very fuzzy, optimistic thinking) I would want a 61.5cm Homer as prima

[RBW] Re: Made in Taiwan AHH?

Agreed... I think that is why I cling to the older style frames, though I am tiring of the chase there. I just measured my favorite (road) bike, a 650B conversion that works incredibly well, and it is 62cm ST (ctc) with a 57cm level TT, 10cm Nitto stem... If it ever came to that, lottery winn

[RBW] Re: Made in Taiwan AHH?

I have not seen the catalog in person but the picture of the AHH (MIT) page Jonathan posted (first in this thread) shows up to 64cm frames. https://groups.google.com/d/msg/rbw-owners-bunch/Nvs_Ftb1Rps/pwCip3DxAgAJ And notes on the recommended PBH ranges... https://cdn.shopify.com/s/files/1/140

[RBW] Re: 57 vs 61 Roadini

elays and life timing happened (a house sale and move, then travel) so I ended up cancelling that for now. We shall see... Let us know of anything you find or hear! Bob Lovejoy Galesburg, IL On Sunday, May 20, 2018 at 9:49:45 AM UTC-5, Dave Grossman wrote: > > Attention Roadini owner

[RBW] Re: 57 vs 61 Roadini

+1 to what Patrick says... I know I prefer a little too large of a frame rather than a little too small. That said, other (younger and racier) folks prefer the opposite. Still, I would be leaning to the 61 though the conversation with people at Riv should be really helpful. If they have a

[RBW] Any new Hilsen news?

It may be awhile before my catalog/brochure tracks me down... For those that do have one in hand, is there anything mentioned on the timing of the new Hilsen's or has anyone heard more? I assume that they will need to get through the new Atlantis builds and delivery before anything else big hap

[RBW] Re: Any new Hilsen news?

Canti-Sam's maybe? I think the new (MIT) Hilsen's are noted in the new catalog but I don't think any schedule or ETA has been announced... though life has been crazed and I could have missed it. That said, I am pretty sure they are a future event... Bob On Sunday, May 20, 2018 at 4:37:55 PM

Re: [RBW] Re: Banana sax reviews needed. Stuff fall out?

Indeed! And not to detour the thread, but the sizing/geometry page has been somewhat updated. The new AHH and Atlantis(MIT) sizes are included... https://www.rivbike.com/pages/geometry Bob Galesburg, IL On Tuesday, May 22, 2018 at 9:03:19 PM UTC-5, Howard Hatten wrote: > > Good eye Jeff > > H

[RBW] Re: FS 60cm Cheviot

And on Ebay... I believe the same frame but could be wrong. https://www.ebay.com/itm/Rivendell-Cheviot-60cm-frame/282973517785?hash=item41e28937d9:g:1EUAAOSwBNtbAMgm Bob On Wednesday, May 23, 2018 at 6:56:43 AM UTC-5, Tom Wyland wrote: > > Bumping this one. I see the frame on CL >

[RBW] Re: FS 60cm Cheviot

Lol... No, you are right both ways! https://stlouis.craigslist.org/bik/d/60cm-rivendell-cheviot-frame/6590861460.html I had not followed your link to see it went to EBay, just saw the comment. I think a good deal for someone, especially with the parts included, wanting to experiment and have

[RBW] Re: New geometry charts available

I do agree... It helps me as well, at least I believe it does! Also, the Sam H. numbers looks off to me. It shows the 58cm Sam with a 61.5cm (effective?) top tube, the same as the Appaloosa. That would definitely be a change if correct. Also, in reference to iamkeith's post... It seems I reme

[RBW] Re: New geometry charts available

I have a 58cm Appaloosa and from my basic measurements, I am going to say that the new listings (on the updated frame geometry page) for it seem correct (61.5 tt, 64.5 front center, 53cm chain stays). The actual page for the Appaloosa frame shows a chart with different numbers (59.7 tt) but I b

[RBW] Re: New geometry charts available

Brent, Thanks for doing that! I think the Sam numbers in the new chart were changed after the initial posting, as the 58cm Sam had a listed ETT of 61.5 (I think). That has been changed to 60, still a bit longer than the 59cm listed previously but I have no reason to believe it wrong. And, ye

[RBW] Re: New geometry charts available

I do think there are are typos and/or oddities in the geometry charts, though, who knows, maybe with certain center pull brakes 55mm is possible. I think you are certainly right about the Tektro sidepulls though. I get the impression that more goes into the recommended PBH/sizing chart than t

[RBW] Re: New geometry charts available

Hi Tom, Thanks for doing those measurements on your Sam! I have been paying particular attention to stack height on potential frames and knowing the real, even if approximate, figure on a 58cm Sam really helps. I need to measure my 58cm Joe to see how it figures in. The 2017 chart shows sta

[RBW] Re: FS: A. Homer Hilsen Frame 56/650b

I am not the OP and cannot speak to a Homer from 8 years ago, but the May/2017 geometry chart includes a 56cm/650B Hilsen... Maybe those figures will help. https://web.archive.org/web/20170602082329/https://www.rivbike.com/pages/geometry Bob Galesburg, IL On Sunday, May 27, 2018 at 4:03:53 PM

[RBW] Re: New geometry charts available

I am pretty sure this is exactly what Garth posted, but I did stumble upon this page today... https://docs.google.com/spreadsheets/d/1gfiN1kOxVrthdc6eScUF9fP5n-BvRBILbBMYiEg5LM4/edit#gid=0 The older 56cm Sam with the 59cm tt always jumped out at me. There may be other models that have changed

[RBW] Re: FS: Complete 63cm Rivendell Romulus - $1400

Try this... 4th page I think. http://www.cyclofiend.com/rbw/romulus/romflyer/index.html I miss my Romulus! One of the few bikes I truly regret selling... Bob Lovejoy Galesburg, IL On Friday, June 1, 2018 at 1:16:28 PM UTC-5, Dave Grossman wrote: > > I'm having trouble finding any

[RBW] Re: A Homer Hilsen Appraisal Help?

e advanced search is also another way to determine what people have previously paid there (or not). There is another AHH that sold on Ebay for $2500 but it would be up to you to determine if there were any pros or cons in comparison to your bike. Bob Lovejoy Galesburg, IL -- You received th

[RBW] Re: Compass Antelope Pass 700 x 55: the fat tire arms race continues

Not that I need to find out... but these should fit an un-fendered Appaloosa, correct? Someone please try these and post pictures! Bob Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

[RBW] Re: FS: 62 Rambouillet 745$ complete bike ebay

It seems there were two people, relatively new to Ebay though that is an assumption, battling it out... I am fairly sure the seller was grateful for the interest from both of those people! Bob On Monday, June 11, 2018 at 11:00:47 AM UTC-5, Luke wrote: > > Just went for $2,175 - (longtime lurke

[RBW] Re: PSA Ram on Ebay

Not that is important but this frame was listed by the seller previously and, in theory, sold (May 26). I am thinking the buyer did not follow through with either payment or was not able to figure out the local pickup, probably the latter. https://www.ebay.com/itm/Rambouillet-By-Rivendell-Bi

[RBW] Re: PSA Ram on Ebay

Sorry, thought that link would work and it does not... from a new session it shows no longer available. Anyway, it shows in Ebay history (advanced search) if anyone needs to see it. In theory it sold for $560 to a bidder with a 100% positive rating and 709 feedback responses. Bob -- You rec

[RBW] Re: PSA Ram on Ebay

Wow...! :>( Thanks Ana! Nothing like an in-person report and pictures. I am sure you have saved some from some unexpected heartache. If someone bids on it now, at least they will know a lot more. And agreed on what probably happened with the previous bidder/winner. Thanks again for the repo

[RBW] Re: FS: SOMA ES

I am not the OP but I believe it is a 61cm frame... https://denver.craigslist.org/bik/d/soma-es-61-cm/6608678142.html Bob -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, sen

[RBW] Re: MIT AHH - When Available?

de on this amazingly beautiful morning! Hope the day for everyone is a good one. Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Re: FS: 700c Wheelset and Dyno, Sugino crank, Schwalbe, Cazadero

Hi Drew, PM sent on the Marathon Supremes. Thanks! Bob L. Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googl

[RBW] Roadini pics with saddle height? - 61cm and 57cm frames?

head tube on the Roadini has me thinking. I will go back and study the geometry diagrams again but any pictures of builds would be helpful. Thanks for any and all help, Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch&

[RBW] Re: Roadini pics with saddle height? - 61cm and 57cm frames?

op tube but a 2cm head tube extension > looks like this. > https://www.flickr.com/photos/79695460@N00/5265783630/in/album-72157607471577085/ > > Joe in GJT > > > On Friday, December 8, 2017 at 10:31:07 AM UTC-7, Bob Lovejoy wrote: > >> I am right at the transitio

[RBW] Real ride comparison: Joe Appaloosa vs Sam Hillborne vs Roadini?

I figured I would ask on the off chance (or maybe not so off?) that someone has ridden all three bikes and can describe their take on the differences they detected. I know from design that the Roadini should be faster than the Sam and the Sam faster than the Joe. I know from a touring and roug

[RBW] Re: Real ride comparison: Joe Appaloosa vs Sam Hillborne vs Roadini?

That is interesting about the comparison between the Hunq and the Sam. And even though I have not owned a Sam, I can still agree with you on the versatility and do-it-all nature. I feel the same about the Joe, though I know the Joe falls slightly to one side of the rough vs road line, maybe t

[RBW] Re: New Greenlantis/ seatpost size?/ crazy pack job

That is an excellent looking bike! Congrats on the new ride... Wow! Bob -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googl

[RBW] Re: Real ride comparison: Joe Appaloosa vs Sam Hillborne vs Roadini?

Thanks Ed. That helps a lot, as well as the comments from others. Question(s) - From a sizing standpoint, did you fit in the middle of the PBH recommendations for a particular size (of the Roadini) or were you on the outer edge of those recommendations (where you could have gone with either a

[RBW] Re: Real ride comparison: Joe Appaloosa vs Sam Hillborne vs Roadini?

Thanks Bill! You do remind me of a friend, a co-worker, in Denver. I would have spent far too long overanalyzing something, usually which bike to keep, sell, modify, build a different way, etc. I would tell him of my dilemma, whatever it was, expecting at least a delay in his response while

[RBW] Re: Real ride comparison: Joe Appaloosa vs Sam Hillborne vs Roadini?

t I could very well be wrong on that. Still, in my particular situation, the Sam won out and I am excited! Best to all and here's to great rides and adventures in the new year, Bob Lovejoy Galesburg, IL On Thursday, December 28, 2017 at 9:59:22 AM UTC-6, Bill Lindsay wrote: > > D

[RBW] Re: Real ride comparison: Joe Appaloosa vs Sam Hillborne vs Roadini?

Thanks John... That is good to know about the older 60cm Sam versus the newer (58cm) version. Over the last few months I saw a 60cm Sam for sale and wondered if that was the way to go. I dug up the old geometry charts and decided to just wait, thinking it might be just what you experienced.

[RBW] Re: Silver Shifter question

I use that combination and love how they work. That said, I have only used them for old-school 8-speed configs and don't have a ton of miles on any particular set. That said, set up as bar top shifters they are the most accessible, intuitive and best tactile feel shifters I have ever used. I

[RBW] Re: Lovely Bicycle

Sorry - and glad! - to resurrect this particular post... http://lovelybike.blogspot.com An update from Velouria... nothing earth shattering but very real, very grounded, and made me nod in agreement and smile. To a great 2018 for all, Bob L. Galesburg, IL On Thursday, June 15, 2017 at 4:11:

[RBW] Re: Lovely Bicycle

I do totally agree. The stories, pictures, reports of adventures and discoveries, those were and are the things I really appreciate. I am just so glad to know she is ok, riding her bike, enjoying life even with the seemingly inevitable challenges and surprises that we all face at times. I hop

[RBW] Re: Lovely Bicycle

Hi Richard, Yes, it certainly caught my attention that she had been drawn back to film (versus digital). And, yes, that does remind us of people (someone!?) possibly close by. I don't believe it is just nostalgia, but I used to be very interested in photography when younger, with a small dar

[RBW] Re: Cumil the Peeper sold me a Canti-Sam frameset

nued success of Rivendell and all of the small bike companies doing their best to survive in this world. Imagine a world without companies like Rivendell?! No Anyway, congratulations! And congratulations for all of the reasons... Bob Lovejoy Galesburg, IL -- You received this message

[RBW] Re: Cumil the Peeper sold me a Canti-Sam frameset

Rod, I am assuming this one is valid: https://www.rivbike.com/pages/geometry I think the one you were seeing is for the earlier (earliest?) versions. Bob On Tuesday, January 9, 2018 at 5:18:34 PM UTC-6, Rod Holland wrote: > > The only Sam Hillborne geometry chart I could find >

[RBW] Re: New Bike Syndrome

d life, to live with the bike for awhile and let it provide inspiration (or resistance) as to build directions. But, I know... easier said than done. Anyway, good luck and congrats on the future new bike! Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Goo

[RBW] Re: New Roadini or hang on to Sam

help! Good luck in the deciding though...! Bob Lovejoy Galesburg, IL On Tuesday, January 16, 2018 at 8:19:03 PM UTC-6, John G. wrote: > > Bill Lindsay posted some advice on this in a different thread, and I > thought it was very wise. I’ll try to find it when I’m on not on mobile. > Kee

[RBW] Light but strong wheels for a Sam or ???

what is now out there, especially for rim-brake wheels. I know too that narrower rims can be used for wider tires but it would still be great to be within recommended widths, at least close. Any help appreciated - and it might be useful to others as well. Bob Lovejoy Galesburg, IL -- You

Re: [RBW] Re: Light but strong wheels for a Sam or ???

Hmmm... It occurs to me I have a little used wheelset that has Pacenti PL23 rims (v2, black label, 36h, 700c). They are currently on an older Raleigh I built up but they could be repurposed (though the rear at least would need to be rebuilt with a different hub). That said, I don't know if the

[RBW] Re: Light but strong wheels for a Sam or ???

tires I am prone to use. Thanks to all for the help. Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-o

[RBW] Re: Light but strong wheels for a Sam or ???

.. Are 32h rims, built well and strong, plenty for the above rider and scenario? Always (over) thinking... Bob Lovejoy Galesburg, IL On Friday, January 19, 2018 at 11:48:46 AM UTC-6, Jay in Tel Aviv wrote: > > I've had a dyno-wheel built with DT R460s. In service for daily commuting &g

[RBW] Re: Light but strong wheels for a Sam or ???

very well have a relatively light wheelset built for the incoming Sam but for now, I may just use what I have for it, and be content. Just ride, as has been wisely said before... :>) And here's to the return of potential riding weather here in the previously completely frozen midwe

[RBW] Re: Light but strong wheels for a Sam or ???

Thanks Jon. I know they're not truly modern and light, but the wheelset I have for the Sam, at least the initial wheels, the ones I already have (bought and paid for long ago) have Mavic A719 rims. And I totally agree that family of rims builds up strong and just fine. The true touring and r

[RBW] Re: Rivendell prices going up.

rider than the never quite satisfied. That said, my incredibly poorly timed good sense and austerity cost me $$ when the deal on Sam's and Cheviots appeared! Seems that stubbornness cost me but at least it is all going to a good cause, something I want more of and for it to succeed. Bob Lo

[RBW] Re: Un-un-racing update: My first ever mountain bike race

est... Bob Lovejoy Galesburg, IL On Monday, February 5, 2018 at 11:29:04 AM UTC-6, Bill Lindsay wrote: > > Next weekend is another first. It will be my 22nd brevet (200k or > longer), but it will be my FIRST on a 700c bike. All my previous > brevet-distance RUSA events have been on a

[RBW] Re: Houseless Sam Hillborne in Portland, Oregon

miss the obvious but still... And for weeks? Wow... Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunc

Re: [RBW] Re: What type of bike would make you buy another riv

under a lot of scenarios, it might be the most fun - and useful! Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: WTB paul touring Cantis

PM sent... On Sunday, February 11, 2018 at 11:25:04 AM UTC-6, Andrew Gammon wrote: > > As the title states, looking for a set of touring cantis. Polished silver > preferred but I can’t be fussy. Would also consider neo retros. > > Cheers -- You received this message because you are subscribed

[RBW] PSA: Atlantii and Frank Jones Sr's on the Riv site

than I should... Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To pos

[RBW] Re: PSA: Atlantii and Frank Jones Sr's on the Riv site

There must be a new and lucky owner of a 56cm 650B Atlantis around as there was one posted, now not showing. Also, one of the rare, somewhat mythical, 59cm Frank Jones Sr frames was also posted, now also gone. Maybe it was a mistake in the posting but it was there. Seems I remember Grant men

[RBW] Re: PSA: Atlantii and Frank Jones Sr's on the Riv site

Agreed I guess here's to a quick resolution of the cash flow issues and good people getting to ride their bikes without worry. Grant and company have had a real influence on how I think about bikes, riding, enjoying, all of it... and I so value that learning and those insights. Credits a

Re: [RBW] Re: Riv request for store credits

Maybe it has been mentioned but... The "Hail Mary" option now includes $10/50/100 options, making >$10 purchases all the more easy... https://www.rivbike.com/collections/featured-products/products/hail-mary-store-credit And highly recommended! Bob Lovejoy Galesburg, IL --

[RBW] Re: WTB: Nitto 32F, with front tab!

Hello Holger, PM sent... Let me know if you do not receive it! Thanks, Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an ema

  1   2   3   >