I'm trying to make some room in the garage and maybe to try some new
stuff, so I'd like to sell or trade the following stuff:
Nitto Folding Bike Stand - it's similar to the one that Bicycle
Quarterly sells, but this one disassembles into 2 pieces. It is the
one pictured on Jitensha's website:
h
I'm trying to make some room in the garage and maybe to try some new
stuff, so I'd like to sell or trade the following stuff:
Nitto Folding Bike Stand - it's similar to the one that Bicycle
Quarterly sells, but this one disassembles into 2 pieces. It is the
one pictured on Jitensha's website:
h
I'm trying to make some room in the garage and maybe to try some new
stuff, so I'd like to sell or trade the following stuff:
Nitto Folding Bike Stand - it's similar to the one that Bicycle
Quarterly sells, but this one disassembles into 2 pieces. It is the
one pictured on Jitensha's website:
h
I'm also interested in an Albatross bar for a trade.
On Oct 20, 12:41 am, Greg wrote:
> I'm trying to make some room in the garage and maybe to try some new
> stuff, so I'd like to sell or trade the following stuff:
>
> Nitto Folding Bike Stand - it's similar to the one that Bicycle
> Quarterly s
A 107 Tange or Shimano UN54 is what most use, and is Riv spec. on the
Sam.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to
I have a lightly used Nitto R-10 bag support that I'd like to trade for a
Mark's rack--anyone interested?
Mine's like this:
http://www.benscycle.net/index.php?main_page=product_info&products_id=872¤cy=USD
Steve
--
You received this message because you are subscribed to the Google Groups "RBW
I don't have a trade for you unless you would like to try a TA front rack in
excellent condition, but I could see buying your R-10.
On Wed, Oct 20, 2010 at 8:18 AM, Frederick, Steve wrote:
> I have a lightly used Nitto R-10 bag support that I'd like to trade for a
> Mark's rack--anyone intereste
Hey, Ken-thanks--I have a fellow that spoke up to buy it on the Bob list last
evening so if a trade doesn't happen he gets first say, but I'll keep you in
mind...
Steve
-Original Message-
From: rbw-owners-bunch@googlegroups.com
[mailto:rbw-owners-bu...@googlegroups.com]on Behalf Of Ke
Ok.
On Wed, Oct 20, 2010 at 9:02 AM, Frederick, Steve wrote:
> Hey, Ken-thanks--I have a fellow that spoke up to buy it on the Bob list
> last evening so if a trade doesn't happen he gets first say, but I'll keep
> you in mind...
>
> Steve
>
> -Original Message-
> *From:* rbw-owners-bun
I guess being an RBW discussion we can't look at the V-O Constructeur rack.
On Wed, Oct 20, 2010 at 9:05 AM, Ken Freeman wrote:
> Ok.
>
>
> On Wed, Oct 20, 2010 at 9:02 AM, Frederick, Steve <
> frede...@mail.lib.msu.edu> wrote:
>
>> Hey, Ken-thanks--I have a fellow that spoke up to buy it on the
I'm inclined to stick with Nitto anyway...
-Original Message-
From: rbw-owners-bunch@googlegroups.com
[mailto:rbw-owners-bu...@googlegroups.com]on Behalf Of Ken Freeman
Sent: Wednesday, October 20, 2010 9:07 AM
To: rbw-owners-bunch@googlegroups.com
Subject: Re: [RBW] Rack swap
I guess b
Either a 110 or a 113, depending on the chainline you wish to acheive:
http://www.suginoltd.co.jp/english/product_crank_xd2_english.htm
On Oct 19, 9:58 pm, meinertj wrote:
> I went poking around the archives and couldn't find an answer right
> away, so I thought I'd ask the group... I have a Sa
A 113 is definitely not needed for the Sam as a 47.5mm chainline is
not needed, it's a road bike. I use a 110 w/1mm DS spacer on my
Bombadil w/24-36-48 rings, and it's a mountain bike.
The difference between a 107 and a 110 is all on the Left (non
driveside), for Tange/Shimano BB's. So, it's reall
Riv says on the website:
"Rivendell models except the Atlantis: 113mm. The Atlantis: 107mm"
The prior owner of my Saluki seems to have used something shorter than 113 (on
a
campy set up) but I have not taken it apart to see what it is. Closer Q, but it
works fine. My Road Std and the Ram both
same here... 107mm on my Sam with the XD2 works perfect. 110 if you
want the extra Q.
~Mike~
On Oct 20, 6:41 am, Garth wrote:
> A 113 is definitely not needed for the Sam as a 47.5mm chainline is
> not needed, it's a road bike. I use a 110 w/1mm DS spacer on my
> Bombadil w/24-36-48 rings, and i
Do you know what the specs are on the Nitto RM014 bar are...
specifically reach?
~Mike~
On Oct 20, 12:43 am, Greg wrote:
> I'm also interested in an Albatross bar for a trade.
>
> On Oct 20, 12:41 am, Greg wrote:
>
>
>
> > I'm trying to make some room in the garage and maybe to try some new
> >
Ray,
I have the rear panniers in waxed cotton and I would heartily
recommend them. They are very well built, waterproof (at least in the
one storm they have been in), and quite stylish. Martina and Jason
were great to work with.
john
On Oct 19, 1:14 pm, Ray wrote:
> It was a recent post by anot
emailed about wheelset
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to
rbw-owners-bunch+unsubscr...@googlegroups.com.
For
Here's the typical build spec for a Sam Hillborne that is shown on the
Rivendell website:
http://www.rivbike.com/assets/payloads/321/original_435326_Rivendell.pdf
The bottom bracket shown on the build spec is a "BB 107 Tange Super".
I can't see how you'd go wrong by using what Rivendell uses for
Ginz -
How hot did you make the fender before you started to bend it back? I
have a heat gun but am somewhat hesitant to use it for fear that I'll
end up melting it or somehow making the problem worse.
Thanks,
Kevin
On Oct 19, 7:21 am, Ginz wrote:
> Kevin,
>
> I had a warped SKS front fender tha
Emailed about the stand.
Lee
On Oct 20, 12:41 am, Greg wrote:
> I'm trying to make some room in the garage and maybe to try some new
> stuff, so I'd like to sell or trade the following stuff:
>
> Nitto Folding Bike Stand - it's similar to the one that Bicycle
> Quarterly sells, but this one disa
Kevin,
Here's something to avoid. I had a twisted SKS front fender once and
followed someone's advice to try putting it in a warm oven for a few
minutes. I preheated the oven to 250 degrees, turned it off, and then
put the fender in with the timer set for a minute. Unfortunately, I
was distract
How hot did I make it? Not very hot. Just warm it up so that when
you bend it, it stays bent and sets in the net position. The plastic
has a sort of memory that is can be reprogrammed with heat and a
little bending (I hope no materials scientists are reading this!) A
hairdryer would be fine. D
emailed about the brakes.
On Oct 20, 2:41 am, Greg wrote:
> I'm trying to make some room in the garage and maybe to try some new
> stuff, so I'd like to sell or trade the following stuff:
>
> Nitto Folding Bike Stand - it's similar to the one that Bicycle
> Quarterly sells, but this one disassemb
Hi Everyone,
Thanks for all your overwhelming interest. At this point, I think all
the items are spoken for or sold, except for the Nitto Dream and
Cinelli bars. If you have sent me an email, I will respond
individually.
Thanks again,
Greg
--
You received this message because you are subscrib
I have abandoned SKS fenders unless I have a customer who can't be
convinced to try something else. The Planet Bike Cascadias are a bit
less expensive, easier to install, give better coverage, and in my
opinion they look nicer (especially now that they removed the gaudy
planet bike logo from the re
JB Importers part number for this widget is 1421. Most shops have a JB
account. (No implication that JB actually has them in stock...)
On Oct 19, 10:43 pm, Ian Dickson wrote:
> There's also these, if you want to get fancy:
>
> http://store.velo-orange.com/index.php/components/brakes/pads-parts/d
thanks, i'll check it out when the triple ships!
j
On Oct 20, 7:18 am, Garth wrote:
> A 107 Tange or Shimano UN54 is what most use, and is Riv spec. on the
> Sam.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send
Jenson USA has them too, in bags of 10:
http://www.jensonusa.com/store/product/BR409Z07-Dia-Compe+94+Alloy+Brake+Lever+End+Buttn.aspx
They also had the proprietary ferrules for a pair of first-gen dia
compe aero brake levers i had, which was nice.
On Oct 19, 3:44 pm, Greg wrote:
> This probably
on 10/19/10 8:26 AM, Peter Pesce at petepe...@gmail.com wrote:
> I can't say I understand the need for this either?
> I must be missing something - what does this stuff do that low end
> Shimano wouldn't do?
>
> I can understand Riv selling low-end thumb shifters, because there's a
> big leap fro
I spoke on the phone with Martina at Swift Industries earlier this
week. She was really helpful and offered several great ideas for
making a porteur bag that would work for my bike. Seems like a great
company making some excellent bags.
On Oct 19, 3:40 pm, Dave Craig wrote:
> The folks who run
I have the Swift Porteur bag.
It is very well made and good looking. The codura is thick.
Stitching excellent. Martina asked me about and included some custom
features at no extra charge.
The bag gets a lot of compliments which is neither here nor there.
However, the bag lead to a meaningful co
Grant just posted a follow up post with the installation of the
aforementioned Microshift "groupo" on his Hilsen.
They look nice from afar... the key question as Jim mentions... will
they still work good a couple of years down the road/trail. Like
everything testing and use will tell us more about
We're excited about the latest shipment of Betty Foys form Rivendell.
It was a long time coming, but well worth the wait.
Ann's is the latest custom build-up:
http://www.renaissancebicycles.com/gallery/rb-gallery-1/
The Hetre tires really are a dream to ride, and I was surprised (being
a fan of f
All this talk about longevity me thinking: How long does a rear
derailer last? Since the RD gets used the most, is hanging in the
breeze, and has constantly moving parts, it should wear out sooner
than anything else (excepting tires & brakes). The RD on my Atlantis
is the original from early '03
I've never worn out a rear derailleur, although I have had to replace jockey
pulleys. Classic Campagnolo derailleurs, with bronze bushings, will last for
decades (I have a 1972 rear der that I'm still using). Modern indexed systems
have less tolerance for wear and may not last as long, but kept
On Wed, 2010-10-20 at 14:31 -0700, Eric Norris wrote:
> I've never worn out a rear derailleur, although I have had to replace
> jockey pulleys.
I wore out -- as in, it became very sloppy and shifting became imprecise
-- a Shimano Titlist GS in a couple of years back around 1974. I
replaced it wit
I see this as a reaction against the big players (Shim, Camp, and
Sram). I believe there was a posting on the site that said it wouldnt
be too long before everything was 10 speed and 10 speed doesnt play
well with others. I think going to a smaller company who is looking to
be a player and working
Great looking bike!
What kind of fenders will fit the Betty with Hetre tires? Will
Honjo/Berthoud fenders fit and if so, which size?
René
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...
Stunning! What make is that kickstand?
From: "Bryan @ Renaissance Bicycles"
To: RBW Owners Bunch
Sent: Wed, October 20, 2010 1:55:52 PM
Subject: [RBW] A Classic Betty Foy
We're excited about the latest shipment of Betty Foys form Rivendell.
It was a long tim
on 10/20/10 2:28 PM, doug peterson at dougpn...@cox.net wrote:
> All this talk about longevity me thinking: How long does a rear
> derailer last?
I've worn out a couple - an old "Deer Head" Deore which was the original on
my '83 Montare mtb. Towards the end, you could actually feel the slop as
Grant appears to be using their Mountain RD which is 8/9, which
Nashbar stocks too. Nashbar also sells a Microshift 10 speed road
group with an RD per their site
"The Nashbar 10 speed short cage rear derailleur has a total teeth
capacity of 29T and a max rear sprocket size of 27T. 2:1 pull ratio
I've got a pair of the Short Stack Panniers in waxed canvas which are
very similar to the pics on their site and I love 'em. They were very
easy to work with; I never did speak to them in person, but my order
was spot on and arrived ahead of schedule. I've been using them on the
Atlantis extensivel
43 matches
Mail list logo