Thanks, all. I finally forced myself to stop dithering and ordered a
MAP/Ahearne bar, black and 31.8. I fully intend to cut at least 2" and
perhaps 3" off each end, and I hope that this doesn't make too many people
wince. But 610 mm (the 31.8 comes only in this width; the 570 in 25.4)
ought to be a
Patrick, I've ridden both. The Jones and MAP bar sweeps are pretty similar
but the Jones needs a shorter stem. I went to the Jones for more width. I
will say the MAP is a better looking bar and I know you don't want to spoil
your beautiful Monocog with an ugly handlebar.
On Thursday, February 1
Thanks, Tim; I considered the Jones bar but decided I'd like to try the MAP
or similar bar first.
On Thu, Feb 18, 2021 at 9:14 AM Tim Baldwin wrote:
> Patrick, I have a 660mm Jones bar I'd be willing to sell. Since you're
> putting on a single speed, there's plenty of room to trim down to taste.
Thanks. I've been eyeing the Daija Far bar, only 44 cm at the hoods, but I
think I'll try the MAP or a similar bar first.
On Wed, Feb 17, 2021 at 9:42 PM Philip Williamson <
philip.william...@gmail.com> wrote:
> Black 31.8 flared drops in either 52 or 58 at the ends. Hoods are much
> narrower. I
Philip,
On my upcoming dirt-drop build I already have a set of Woodchippers, but
I'd consider using these Nitto guys instead. I'll be running a Paul
adapter for a SRAM trigger shifter. The Woodchipper has a long 31.8
section so there's plenty of room to clamp the Paul shifter perch along
wit
Black 31.8 flared drops in either 52 or 58 at the ends. Hoods are much
narrower. I like the 58. I got a 52 at a great price from Analog, and
Candace said “you probably won’t like it if you’re over 5’2”. She was
right, at least with the Ritchey Force stem on the RoadLite. I swapped for
a 58 and
It's Joe Ramey, right?
On Wed, Feb 17, 2021 at 4:58 PM Patrick Moore wrote:
> [Sorry, forgot your name] -- thanks very much for the offers. I'd prefer
> the Ahearn/Map bar if it's black and 31.8, so would be interested indeed
> in knowing specs and your price. In fact, the A/M bar looks like jus
[Sorry, forgot your name] -- thanks very much for the offers. I'd prefer
the Ahearn/Map bar if it's black and 31.8, so would be interested indeed in
knowing specs and your price. In fact, the A/M bar looks like just the
right "upright" bar to try for this bike.
Yes, narrowing the bar reduces acces
I also have some Ahern MAP bars which I am not attached to, as well as
possibly a couple others, but I am somewhat perplexed, because with just
about any bar you go with narrowing it substantially will in turn leave you
with minimal bar area for bells and such.
After years of accumulating stuff
I've got a SOMA Eagle bar I'm not using: not sure if it would work for you
or not
They don't presently make these: my impression was that they were reworking
the design and maybe coming out with a replacement.
See below links:
https://photos.google.com/photo/AF1QipMauwhFiGVhwkEYok0XyRrEcms4
Thanks, Joe. Three answers today, and you've made your quota.
Seriously, thanks, in particular for the insight about the Jones bar.
On Mon, Feb 15, 2021 at 5:11 PM Joe Bernard wrote:
> Apparently I'm the only one home and answering bar questions today so I'll
> offer one more thought:
>
> I've
Apparently I'm the only one home and answering bar questions today so I'll
offer one more thought:
I've used Jones Loop Bars a few times and like the one longish position
they offer at the grips, but think they're overrated for other positions.
The grab-hold by the stem is useful for climbing k
Thank you. Also close, but alas, per the photo, does not sweep back enough.
For some reason your post made me think of looking at VO's handlebar
product portfolio (bidniss speek, that) and the Dajia Far Bar (shallow 'n'
short flared drop, 44 cm at hoods), Granola Bar, and Curvy bar might
contend.
My bad, 31.8, black, it's Cinelli! 53cm, still narrow.
https://northwestbicycle.com/products/pepper-alloy-fixie-riser-bar-blk-31-8-53cm-b-cn1981?utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping¤cy=USD&gclid=Cj0KCQiA1KiBBhCcARIsAPWqoSo9y35kaAkG2CO0FazubKoezQ482GCc22eppsOg81B_OLEgDNC
Thanks, Joe, I'll take another look (took a quick one). The 25.4 mm clamp
is not a deal breaker, but I'd prefer 31.8 (stem is 31.8) and black, so any
advice (y'all) about a similar shape but in fatter clamp and darker color,
please speak up.
On Mon, Feb 15, 2021 at 12:52 PM Joe Bernard wrote:
>
You might like these Nitto Urban Bars they sell for the fixie/messenger
crowd. They're narrow like you seem to want with the backsweep you need.
https://www.benscycle.com/nitto-b260aa-urban-riser-handlebar-flatriser-handlebar-nitto-b260aa-870/p?idsku=642153&gclid=Cj0KCQiA1KiBBhCcARIsAPWqoSoN9w4f
Sheesh. With higher and longer stem *and the right drop bar.*
On Mon, Feb 15, 2021 at 11:58 AM Patrick Moore wrote:
> I know that I could get what I need with a longer (say 110 or 120 mm
> instead of 90) and higher (say 45* instead of 30*) stem, but the Monocog
> has cable discs (which work perf
17 matches
Mail list logo
